LI32.50-P-075055
Service Bulletin Details
Public Details for: LI32.50-P-075055
Complaint malfunction due to the ingress of dirt during the repair of the hydraulic system. Cause cleaning instructions in wis are not being sufficiently observed. This can result in dirt entering the hydraulic system of the vehicle or
Models from 2022
Models from 2021
Models from 2020
2020 MERCEDES-BENZ AMG GLE43 |
2020 MERCEDES-BENZ AMG GLE63 |
2020 MERCEDES-BENZ GLE350 |
2020 MERCEDES-BENZ GLE350 E |
2020 MERCEDES-BENZ GLE450 |
2020 MERCEDES-BENZ GLE580 |
Models from 2019
2019 MERCEDES-BENZ AMG GLE43 |
2019 MERCEDES-BENZ AMG GLE63 |
2019 MERCEDES-BENZ GLE 550E |
2019 MERCEDES-BENZ GLE350 |
2019 MERCEDES-BENZ GLE400 |
Malfunction Due To Dirt In The Electrohydraulic Suspension (eABS/eSuspension) Topic number LI32.50-P-075055 Version 1 Function group 32.50 - Active Body Control (ABC) Date 7/11/22 Validity Model series 167, 223 with SA 490/eABC Reason for change Complaint Malfunction due to the ingress of dirt during the repair of the hydraulic system. Cause Cleaning instructions in WIS are not being sufficiently observed. This can result in dirt entering the hydraulic system of the vehicle or the filling unit. In subsequent filling/emptying procedures, the dirt is then transferred to another vehicle. Remedy Before removing/replacing an electrohydraulic pump unit or the associated hydraulic lines, as well as when removing the electrohydraulic suspension struts, it is essential to thoroughly wash the underbody. If the dust cap is missing/defective and if the filling valve in the interior is contaminated, the surrounding area must be cleaned thoroughly. The filling valve and the dust cap must be replaced after emptying the system (-> see WIS references in the attachment). The WIS work instructions and WU default values are being expanded accordingly. WIS-References Document number Title Note ar32.50-p-0009-01s Remove/install service connection at the shock absorber of the electrohydraulic suspension if the dust cap is missing, the service connection/connection fitting including the dust cap must be replaced. ar32.50-p-0009-01me Remove/install service connection at the shock absorber of the electrohydraulic suspension if the dust cap is missing, the service connection/connection fitting including the dust cap must be replaced. 11.07.2022 17:44:35 © Copyright Mercedes-Benz AG JKANTAR Page 1 / 2 Symptoms Chassis/suspension > Suspension/Dampening > Suspension System Function > Oil loss Chassis/suspension > Suspension/Dampening > Active body control > Leakage > Oil leaks Parts Part number ES1 ES2 Designation Quantity Note EPC A0003280000 CONNECTION FITTING front left and right 1 if the dust cap is missing, the corresponding connection fitting and the dust cap must be replaced X A0003280000 CONNECTION FITTING front left and right 1 if the dust cap is missing, the corresponding connection fitting and the dust cap must be replaced X A0003230401 DUST CAP front left and right 2 if the dust cap is missing, the corresponding connection fitting and the dust cap must be replaced X Operation numbers/damage codes Op. no. Operation text Time Damage code Note 32c0d 32r0d 32w03 32h03 11.07.2022 17:44:35 © Copyright Mercedes-Benz AG JKANTAR Page 2 / 2