TSB210127-090920

Service Bulletin Details

Public Details for: TSB210127-090920

This technical service bulletin describes the verification and resolution of misfire fault codes without any audible misfire or performance loss (false misfire). This can be caused by aftermarket exhaust gas pressure sensors not providing e


- 9999 -

9/15/22, 4:45 PM
Misfire Fault Codes Caused by Aftermarket Exhaust Gas Pressure Sensor
Technical Service Bulletin
Technical Service Bulletin: TSB210127
Released Date: 09-Sep-2022
Misfire Fault Codes Caused by Aftermarket Exhaust Gas Pressure Sensor
Misfire Fault Codes Caused by Aftermarket Exhaust
Gas Pressure Sensor
Warranty Statement
The information in this document has no effect on present warranty coverage or repair practices,
nor does it authorize TRP or Campaign actions.
Contents
Product Affected
B6.7 CM2350 B121B
B6.7 CM2450 B155B
B6.7N CM2380 B150B
ISB6.7 G CM2180 B118
ISL CM2350 L101
ISL CM2350 L111
ISX12N CM2380 X120B
ISX15 CM2350 X101
L9 CM2350 L116B
L9 CM2350 L119B
L9 CM2350 L123B
L9 CM2450 L126B
L9 CM2670 L128B
L9N CM2380 L124B
L9N CM2380 L130B
L9N CM2380 L142B
X12 CM2350 X119B
X12 CM2450 X137B
X15 CM2350 X114B
X15 CM2350 X116B
X15 CM2450 X124B
X15 CM2450 X134B
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2021/tsb210127.html
1/4
9/15/22, 4:45 PM
Misfire Fault Codes Caused by Aftermarket Exhaust Gas Pressure Sensor
Issue
Symptom:
Misfire fault codes without any audible misfire or performance loss (false misfire).
Fault Codes: 2457, 2533, 2534, 2535, 2536, 2537, 2538, 5895, 5896, 5897, 5898, 5899,
5911, 5914, 6413, 6425, 6426, 6427, 6428, 6429, 6431
Possible low power or derate complaint caused by fault code(s).
Root Cause:
Aftermarket exhaust gas pressure sensor not providing equivalent signal as genuine
Cummins® exhaust gas pressure sensor.
Verification
Verify exhaust gas pressure sensor is a genuine Cummins® part. See Figure 1 in Part
Identification section below.
There is a possibility that aftermarket exhaust gas pressure sensor can have a Cummins®
part number printed on the sensor body. See Figure 2 and 3 in Part Identification section
below.
Service Instructions
If an aftermarket exhaust gas pressure sensor is found, replace with a genuine Cummins®
exhaust gas pressure sensor. See corresponding Service Manual. Reference Procedure 019-376
in Section 19.
Part Identification
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2021/tsb210127.html
2/4
9/15/22, 4:45 PM
Misfire Fault Codes Caused by Aftermarket Exhaust Gas Pressure Sensor
Figure 1, Genuine Cummins® Exhaust Gas Pressure Sensor.
Figure 2, Aftermarket Exhaust Gas Pressure Sensor.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2021/tsb210127.html
3/4
9/15/22, 4:45 PM
Misfire Fault Codes Caused by Aftermarket Exhaust Gas Pressure Sensor
Figure 3, Aftermarket Exhaust Gas Pressure Sensor.
Document History
Date
Details
2021-6-10
Module Created
2022-1-13
Updated Product Affected and Symptom sections.
2022-7-5
Updated Verification section and Figures.
2022-9-9
Added ISB6.7 G CM2180 B118.
Last Modified: 09-Sep-2022
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2021/tsb210127.html
4/4


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.