0100122

NUMBER:
01-001-22
GROUP:
01 - Lubrication and
Maintenace
DATE:
September 13, 2022
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
This bulletin supersedes Technical Service Bulletin (TSB) 01-001-21, date of issue February
20, 2021, which should be removed from your files. All revisions are highlighted with
**asterisks** and include additional model years.
SUBJECT:
Oil Change Monitor Displaying Prematurely
OVERVIEW:
This bulletin involves resetting the oil life monitor and if necessary changing the engine oil and filter.
MODELS:
2018 - **2023**
(GU)
Alfa Romeo Stelvio
2018 - **2023**
(GA)
Alfa Romeo Giulia
NOTE: This bulletin applies to vehicles within the following markets/countries: North
America.
NOTE: This bulletin applies to vehicles equipped with a 2.0L 280HP I4 DI Turbo Engine
(Sales Code EC2).
SYMPTOM/CONDITION:
The customer may experience the oil change light illuminated on the dash shortly after taking
delivery of the vehicle within 6,437 Km (4,000 miles).
DIAGNOSIS:
Upon initial delivery of a stored vehicle to the customer, validate the mileage on the vehicle, and
determine the number of days since the vehicle was built. Perform the repair below according
to both the mileage and the number of days since vehicle build.
Prior to Delivery of Vehicle to Customer
1. If the number of days since vehicle build is equal to or less than 365 days, AND if mileage is
equal to or less than 241 Km (150 miles), the oil life monitor should be reset/cleared. Proceed
to Step 2 of the Repair Procedure, use LOP (09-55-01-94).
2. If the number of days since vehicle build is greater than 365 days OR mileage is greater than
150 miles, the engine oil and filter should be changed, and the oil life monitor reset/cleared,
proceed to Step 1 of the Repair Procedure, use LOP (09-55-01-95).
01-001-22
-2-
Customer Owned Vehicle
1. If a customer brings the vehicle back to the dealer due to the oil service light being on with less
than 6,437 Km (4,000 miles) on the vehicle, the dealer should change the oil and filter, and
reset/clear the oil life monitor under warranty. Proceed to Step 1 of the Repair Procedure, use
LOP (09-55-01-96).
2. If a customer brings the vehicle back to the dealer due to the oil service light being on with
more than 6,438 Km (4,001 miles) on the vehicle, This Bulletin does not apply. Normal oil
change procedure should be performed.
If the customer describes the symptom/conditions listed above, perform the Repair Procedure.
PARTS REQUIRED:
Qty.
Part No.
Description
1 (AR)
04892339AB
Filter, Oil
5.5 qts
(AR)
5.5 qts
(AR)
68444159AA
Quart
68492706AA
Bulk
Oil, Engine (SAE 0W-30 Full Synthetic)
Oil, Engine (SAE 0W-30 Full Synthetic)
Bulk - 55 Gal Drum
REPAIR PROCEDURE:
1. Perform an engine oil and filter change. Refer to the detailed service procedures available in
DealerCONNECT> Service Library under: Service Info> 09 - Engine, 2.0L / Lubrication / Oil /
Standard Procedure>engine oil and filter change.
2. Resetting the oil change indicator system, refer to the following procedure:
• Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the ignition
to ON/RUN position (do not start the engine).
• Fully depress the accelerator pedal, slowly, five times within 10 seconds.
• Without pushing the brake pedal, push the ENGINE START/STOP button once to return the
ignition to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you start the vehicle, the oil change
indicator system did not reset. If necessary, repeat this procedure. If the above
process fails to complete, use the scan tool to complete the reset process.
-3-
01-001-22
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation
No:
09-55-01-94
09-55-01-95
09-55-01-96
Description
Skill Category
Oil Life Monitor System - Reset Only
(0 - Introduction)
1 - Engine Repair 0.2 Hrs.
and Performance
Engine Oil and Filter with Oil Life Monitor
Reset - Procedure
Greater than 365 days, or mileage is
greater than 241 Km (150 miles)
(0 - Introduction)
Engine Oil and Filter with Oil Life Monitor
Reset - Procedure
Vehicles with less than 6,437 Km (4,000
miles)
(0 - Introduction)
1 - Engine Repair 0.8 Hrs.
and Performance
FAILURE CODE:
ZZ
Service Action
Amount
1 - Engine Repair 0.8 Hrs.
and Performance