37143120130025

Service Bulletin Details

Public Details for: 37143120130025

Atf pan leaks


- 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 -

Technical Service Bulletin
37 ATF pan leaks
37 14 31 2013002/5 June 3, 2014. Supersedes Technical Service Bulletin Group 37 number 11-19 dated January
31, 2011 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4
2000 - 2011
All
With Automatic Transmission 01V, 09L, 0B6, or 0BK
A4, S4 Cabriolet
2003 - 2009
All
With Automatic Transmission 01V, 09L, 0B6, or 0BK
A6, S6, RS6
2000 - 2011
All
With Automatic Transmission 01V, 01L, 09E, or 09L
A8, A8L, S8
2000 - 2010
All
With Automatic Transmission 01L, 09E, or 09L
A5, S5
2008 - 2011
All
With Automatic Transmission 0B6 or 0BK
A5, S5 Cabriolet
2010 - 2011
All
With Automatic Transmission 0B5, 0B6, or 0BK
Q5
2010 - 2011
All
With Automatic Transmission 0B6 or 0BK
S4 Sedan
2004 - 2009
All
With Automatic Transmission 09L
Condition
REVISION HISTORY
Revision
Date
Purpose
5
-
Revised header data (Removed 0B5 transmission vehicles)
4
1/31/2011
3
12/16/2008
Revised header data
Revised Production Solution and Warranty
Revised title (Added Repair Group)
Automatic transmission fluid is leaking at the sump pan gasket.
Technical Background
As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak.
© 2014 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Production Solution
• For transmissions 01V and 01L, there is no change.
• For transmissions 09E and 09L, a rubber metal sump pan seal in production from the following VINs:
• 8E_6A177000 (A4 with 09L transmission)
• 4F_6N121750 (A6 with 09L transmission)
• 4E_6N016460 (A8 with 09L transmission)
• 4F_7N036440 (A6 with 09E transmission)
• 4E_7N005290 (A8 with 09E transmission)
• For 0B6 and 0BK transmissions, a rubber metal sump pan seal in production from introduction of the
transmissions.
Service
1. Tighten the transmission sump pan bolts to the specified torque. Refer to repair manual for specific model.
2. Clean the sump pan and the transmission housing with brake cleaner spray.
3. Test drive the vehicle and inspect the sump pan gasket for leaks. A moist seal is normal.
© 2014 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
When procedure applies to vehicles under warranty, use the following:
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
3756
Damage Code:
0050
Labor Operations: Torque transmission pan bolts and clean
3756 1399
40 TU
Diagnostic Time:
GFF – Checking and clearing fault codes included in
existing labor operations
No allowance
0 TU
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
0121 0004
10 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2013002/5
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB (2013002) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2014 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.