ITB22-041
Service Bulletin Details
Public Details for: ITB22-041
Drive shaft boot service information service information if a drive shaft (axle shaft) boot on an applied vehicle is found to be leaking grease, and there is no abnormal noise or obvious cv joint risk due to water intrusion and/or com
- 2023 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 -
Models from 2023
2023 INFINITI Q50 |
2023 INFINITI QX50 |
2023 INFINITI QX55 |
2023 INFINITI QX60 |
2023 INFINITI QX80 |
Models from 2022
2022 INFINITI Q50 |
2022 INFINITI Q60 |
2022 INFINITI QX50 |
2022 INFINITI QX55 |
2022 INFINITI QX60 |
2022 INFINITI QX80 |
Models from 2021
2021 INFINITI Q50 |
2021 INFINITI Q60 |
2021 INFINITI QX50 |
2021 INFINITI QX60 |
2021 INFINITI QX80 |
Models from 2020
2020 INFINITI Q50 |
2020 INFINITI Q60 |
2020 INFINITI QX50 |
2020 INFINITI QX60 |
2020 INFINITI QX80 |
Models from 2019
2019 INFINITI Q50 |
2019 INFINITI Q50 HYBRID |
2019 INFINITI Q60 |
2019 INFINITI Q70 |
2019 INFINITI Q70L |
2019 INFINITI QX30 |
2019 INFINITI QX50 |
2019 INFINITI QX60 |
2019 INFINITI QX60 HYBRID |
2019 INFINITI QX80 |
Models from 2018
Models from 2017
Models from 2016
Classification: Reference: FA22-003 Date: ITB22-041 November 23, 2022 DRIVE SHAFT BOOT SERVICE INFORMATION APPLIED VEHICLES: All Infiniti Vehicles 2016 Model Year And Newer SERVICE INFORMATION If a Drive Shaft (Axle Shaft) Boot on an APPLIED VEHICLE is found to be leaking grease, AND There is no abnormal noise or obvious CV Joint risk due to water intrusion and/or complete grease loss, check for REPAIR KIT-DUST BOOT (cv Joint Boot Kit) availability. If there is a REPAIR KIT-DUST BOOT (CV Joint Boot Kit) available for the vehicle being repaired, do NOT replace the axle. Install a new boot kit following the procedure in the ESM. o Refer to the ESM: TRANSMISSION & DRIVELINE > FRONT AXLE > REMOVAL AND INSTALLATION > FRONT DRIVE SHAFT BOOT o If the complete axle (drive shaft) is replaced when only a new boot is required, the over-repair may be charged back to the retailer. If there is NOT a REPAIR KIT-DUST BOOT (CV Joint Boot Kit) available for the vehicle being repaired, refer to the ESM for further diagnostic information. IMPORTANT: When servicing vehicles with staked axle nuts, refer to ITB21-002 to prevent Drive Shaft thread damage. Driver (LH) side axle shown, passenger (RH) side is similar Outer boot Inner boot Figure 1 Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this applies to your vehicle. 1/2 PARTS INFORMATION DESCRIPTION REPAIR KIT-DUST BOOT (CV Joint Boot Kit) (1) PART NUMBER QUANTITY (1) As Needed Reference the Electronic Parts Catalog (EPC) and use the VIN of the vehicle being repaired to determine the correct part number. AMENDMENT HISTORY PUBLISHED DATE REFERENCE November 23, 2022 ITB22-041 DESCRIPTION Original bulletin published 2/2 ITB22-041