SSM68878

TOPIx - SSM68878 - XF 12MY on - RCM - Configuration failure DTC`s logged in module Page 1 of 2
Reference SSM68878
Models XF / X250
Title XF 12MY on - RCM - Configuration failure DTC`s logged in module
Category Diagnostic Software Hardware
Last
10-Oct-2013 00:00:00
modified
Symptom 000101 Diagnostic Concerns
Issue:
Multiple Diagnostic Trouble Codes (D TC)’s logged in the Restrains Control Module
(RCM) after configuration has been completed. Displayed DTC’s are B1001-56,
B1003-56, B1004-56, B1005-56, B1006-56, U2100-00, U3000-49, U3002-51
Cause:
The software CX23-14C028-AD is not compatible with the earlier hardware CX2314C246-AA
Action:
Procedure 1 – To download fix from server
1. Launch “Internet Explorer”.
2. “Paste” this link:
http://www.techservice.jlrext.com/vdirs/wds/FileTran/JLR/DSFM_JLR_PatchFiles.asp
into the address bar at the top of the Internet Explorer page.
3. Press “Enter” key.
4. Type the file name “12MY_ON_X250_RCM.zip” into the search box.
5. Click “Download”.
6. A Pop-up box will appear – Click “Save”.
7. Download zip file “12MY_ON_X250_RCM.zip” to your SDD desktop.
8. Continue to Procedure 2
Procedure 2 – To load fix to SDD
1. From the SDD Menu screen, press the “Windows” key and “D” key together to
access the desktop.
2. Locate file - “12MY_ON_X250_RCM.zip” on the desktop.
Content 3. Double-Click on “12MY_ON_X250_RCM.zip”
4. Double-Click on “12MY_ON_X250_RCM.exe”.
5. A WinZip Caution pop up box will appear, Select “Yes”.
6. Select “Unzip” in the WinZip Self extractor box.
7. Select “OK” when “1 file unzipped successfully" message appears.
8. Select “Close” in the WinZip Self extractor box.
9. Restart the SDD machine.
10. Continue to Procedure 3
Procedure 3 – Program the RCM with seed code for software regression.
1. Connect SDD machine to the vehicle using the communication device.
2. Start a new session
3. Select the “Diagnostic session” tab in the bottom of the screen.
4. Select symptoms Electrical > Instruments > Warning lamps > Air bag warning
lamp
5. From the Vehicle Specification screen. Select the “KEY” on the left hand side.
6. A Seed code pop up box will appear, Note the Seed code and submit on a TA for
software regression.
7. When Technical Support supply a return code, enter the return code in capital
letters into the seed code pop box.
8. Select “continue”
9. Select “Service Functions” from the top of the screen
10. Select “Configure new module – Restraints Control Module”
11. Complete all on screen instruction until screen “Confirm software parts to be
downloaded”
http://topix.jaguar.jlrint.com/topix/service/archive/440822/index
10/14/2013
TOPIx - SSM68878 - XF 12MY on - RCM - Configuration failure DTC`s logged in module Page 2 of 2
12. Select the green tick
13. A pop up box will appear for Operator question Select the Green tick
14. Complete all on screen instructions.
15. Continue to Procedure 4
Procedure 4 – DTC clear and re-read
1. Select “Recommendations” from the top of the screen.
2. Select “Complete vehicle - Clear all stored diagnostic trouble codes”
3. Complete all on screen instructions
4. When DTC clear is complete and the recommendations screen is displayed,
Select “Complete vehicle - Re-read all stored diagnostic trouble codes”
5. Complete all on screen instructions
6. Select “DTCs” from the top of the screen.
7. Check for DTC U201B-57 Control Module Calibration Data #2
8. If DTC U201B-57 is present Continue to Procedure 5
9. If no DTC’s Continue to Procedure 7
Procedure 5 – Add/remove accessories – Bumper replacement for DTCU201B57 present.
1. Select “Service Functions” from the top of the screen.
2. Select Add/remove accessories – Bumper replacement
3. Select correct bumper and select the Green tick
4. Complete all on screen instructions
5. If a failure happens during removal of build mode continue to Procedure 6
6. If no failure complete Procedure 4
Procedure 6 – Special applications – Restraints build mode
1. Select “Special applications – Restraints build mode”
2. Select “Normal mode”
3. Complete all on screen instructions.
4. If no failure complete Procedure 4
Procedure 7 - to remove fix file so vehicle with later hardware can be
programmed.
1. From the SDD Menu screen, press the “Windows” key and “D” key together to
access the desktop.
2. Locate file - “12MY_ON_X250_RCM.zip” on the desktop.
3. Double-Click on “12MY_ON_X250_RCM.zip”
4. Double-Click on “Del_12MY_ON_X250_RCM.bat”.
5. A WinZip Caution pop up box will appear, Select “Yes”.
6. A C:\WINDOWS\system32\cmd.exe Box will appear with “Press any key to
continue”
http://topix.jaguar.jlrint.com/topix/service/archive/440822/index
10/14/2013