SSM69518

Service Bulletin Details

Public Details for: SSM69518

Unable to save navigation co-ordinates


- 2023 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -

TOPIx - SSM69518 - Unable to save navigation co-ordinates
Page 1 of 1
Reference SSM69518
XF / X250
Models XJ / X351
F-TYPE / X152
Title Unable to save navigation co-ordinates
Category Electrical
Last modified 06-Nov-2013 00:00:00
Symptom 207000 Entertainment Systems
Issue: A customer may report that they are unable to
save navigation co-ordinates.
Cause: Software compatibility issues
Action: If a customer reports the concern detailed above
an HLDF software update will be required using SDD. To
complete the update follow the instructions below:-Ensure DVD 135 patch 9 or later is loaded
-Connect the vehicle to a suitable power supply
Content -Connect SDD to the vehicle
-Start a new diagnostic session
-Enter symptoms: Electrical - Information and
entertainment system - Touch screen display
-From the “Extras” tab select "Configure existing module Front control/display interface module (high level display
front)"
-When complete end the session, and disconnect SDD.
-Disconnect the power supply
http://topix.jaguar.jlrint.com/topix/service/archive/443327/index
11/6/2013


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.