00146620379491

Technical Service Bulletin
00 "Invalid Data Record" DTC stored in ECU
00 14 66 2037949/1 July 30, 2014.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
All
2008 - 2016
All
Not Applicable
Condition
A DTC with the description “Invalid Data Record” is stored after an ECU has been replaced or updated.
Technical Background
This DTC is normal. It indicates that the parameter data has not been properly programmed into the ECU by SVM.
Production Solution
Not applicable.
Service
The DTC can only be cleared if the parameter data is programmed into the ECU using SVM.
1 If there is no GFF test plan for the DTC, execute an SVM specified vs. actual comparison or SVM check
module configuration.
2 If SVM does not provide a response with updated parameter data (“parameterization”), search for any
applicable TSBs with an SVM exchange code. The code can also be listed in ETKA under the “Remarks”
section for the specific part, or at the top of the illustration page in the “Name” section description.
3 If a parts bulletin number is found, open the
bulletin to view the code.
Figure 1. Parts bulletin number listed in ETKA
© 2014 Audi of America, Inc.
Page 1 of 2
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
4 To view the parts bulletin, click on the “INFOLINE”
tab at the top of the ETKA window. Then, select
“GP bulletins”. Scroll down to the applicable parts
bulletin number.
Figure 2. GP Parts bulletin listings under the INFOLINE
tab
5 • If no parts bulletin or SVM code is provided and the DTC cannot be cleared, contact TAC.
• If the main programming of the module was updated using an SVM code and the DTC cannot be cleared,
contact TAC.
Warranty
This TSB is informational only and not applicable to any Audi warranty. Replacement of an ECU because of this
DTC is not allowed under warranty.
Additional Information
All parts and service references provided in this TSB (2037949) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2014 Audi of America, Inc.
Page 2 of 2
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.