No. 239-22

911 (992)
Technical Information
239/22 ENU
ANB6
7
ANB6 - Checking Threaded Joint for Seat Belt Mount at the Left and Right and Replacing
Seat Frame if Necessary (Recall Campaign)
Model Line:
911 (992)
Model Year:
As of 2021 up to 2022
Equipment:
Full bucket seats (M-no. Q1K)
Concerns:
Threaded joint securing seat belt mount to driver's seat and passenger's seat
Cause:
Due to a process error in the production run, on affected vehicles the screw connection of the
belt end installing on the driver's seat as well as the passenger seat may not comply with the
specifications.
If this is the case, the functionality of the screw connection cannot be ensured in the event of an accident
and thus loosening of the seat belt attachment cannot be ruled out.
Action required: Check the screw connection for the belt end installing on the driver's seat and passenger seat and
replace the seat frame if necessary.
Please note that as of the time of this publication, only the Check instructions are available. If the seat
frames need to be replaced as a result of the check, the vehicle must be grounded at the dealer until such
time as the frames are available. Frames are not expected to be available until late January 2023.
Affected
Vehicles:
Only vehicles assigned to the campaign (see also PCSS Vehicle Information)
AfterSales
Dec 16, 2022
Page 1 of 4
7
911 (992)
ANB6
ENU
Technical Information
239/22
Installation
Position:
1
Installation position of threaded joint for seat belt mount
– Threaded joint for seat belt mount at the left and right (checking seat frame)
Required parts
Parts Info:
Part No.
Designation
– Point of use
Quantity
PAF009057
 Hexagonal fit bolt
– Seat belt mount
2 piece(s)
Required tools
Tool:
Dec 16, 2022
Page 2 of 4
•
Torque wrench, 20-100 Nm (15-74 ftlb.), e.g. VAS 5820 - Torque wrench, 20-100 Nm (15-74
ftlb.) or equivalent
AfterSales
911 (992)
Technical Information
239/22 ENU
ANB6
7
Checking threaded joint for seat belt mount at the left and right
Work
Procedure:
1
Check threaded joint for seat belt mount at the left and right (driver seat and passenger seat).
1.1
Open the driver's and passenger's door.
1.2
Unscrew and remove threaded joint for seat belt mount on the driver's seat and passenger
seat.
1.3
Check the relevant fastening screw for damage.
•
Both fastening screws can be unscrewed easily after loosening them. The thread
of both fastening screws is clean and shows no signs of damage apart from the
usual signs of use: End of action. Screw in and tighten new fastening screw. Then
continue with Step 2.
Tightening torque 50 Nm (36.9 ftlb.)
2
Enter the campaign in the Warranty and Maintenance booklet.
Warranty processing
Information
The specified labor times were determined specifically for carrying out this campaign and include all
required preliminary and subsequent work.
The labor times may differ from the labor times published in the Labor Operation List in PCSS.
Scope 1:
Checking threaded joint for seat belt mount on left and right
Labor time:
Checking threaded joint for seat belt mount on left and right
Includes:
Loosening and securing fastening screw for seat belt mount
Labor time: 37 TU
Required parts:
PAF009057
Hexagonal fit bolt
2 pieces
Transport costs
1 piece
Additional costs:
ANB60000001
* For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an
additional part with the designation “Transport costs” and with the amount as per invoice. Please
document a copy of the invoice in WWS.
 Damage Code ANB6 099 000 1
AfterSales
Dec 16, 2022
Page 3 of 4
7
911 (992)
ANB6
ENU
Technical Information
239/22
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2022 Porsche Cars North America, Inc.
Dec 16, 2022
Page 4 of 4
AfterSales