22-NA-087

Service Bulletin Details

Public Details for: 22-NA-087

This technical bulletin provides a procedure to replace the fuel injector and the wiring harness to correct a customer concern of malfunction indicator lamp (mil) illuminated with dtc P0201, P0202, P0203, P0204, P0205, P0206 and/or P0216 se


- 2022 - 2021 -

Bulletin No.:
Service Bulletin
Date:
22-NA-087
January, 2023
TECHNICAL
Subject:
Malfunction Indicator Lamp (MIL) Illuminated - DTC’s P0202 and/or P0216 Set
Reference PIP5840 When Performing Repair
Brand:
Model:
Cadillac
to
Escalade Models
2021
2022
Silverado 1500
2021
2021
2022
2022
2021
2022
2021
2021
2022
2022
2021
2022
Silverado LTD
(RPO J21,
VIN Digit 5 = W/Y)
Chevrolet
Silverado New
(RPO J22,
VIN Digit 5 = A/D)
Suburban
Tahoe
Sierra 1500
GMC
Model Year:
from
Sierra Limited
(RPO J21,
VIN Digit 5 = 8/9)
Sierra New
(RPO J22,
VIN Digit 5 = H/U)
Yukon Models
Involved Region or Country
Condition
VIN:
from
to
Engine:
Transmission:
LM2
North America
Some customers may comment that the MIL is illuminated.
Some customers may also comment that the engine runs rough.
Some technicians may find one or more of the following DTCs set:
Note: DTC P0216 may or may not be set.
• P0202
• P0216
Cause
This condition may be caused by a broken terminal pin inside the #2 injector harness
connector.
Correction
If the #2 injector has been identified as the concern, replace the #2 fuel injector and
injector wiring harness.
Copyright 2023 General Motors LLC. All Rights Reserved.
Page 2
January, 2023
Important: Service agents must comply with all
International, Federal, State, Provincial, and/or
Local laws applicable to the activities it performs
under this bulletin, including but not limited to
handling, deploying, preparing, classifying,
packaging, marking, labeling, and shipping
dangerous goods. In the event of a conflict between
the procedures set forth in this bulletin and the
laws that apply to your dealership, you must follow
those applicable laws.
Service Procedure
Refer to PIP5840: Modify Sound Insulator During
Service, Fuel Injector Wiring Harness Replacement in
the Service Manual and High Pressure Diesel Fuel
Injector Replacement in the Service Manual.
Bulletin No.: 22-NA-087
Parts Information
Causal
Part
Description
Part
Number
Qty
N/A
HARNESS, F/
INJR WRG
55513485
1
X
INJECTOR, HIGH
PRESS
DSL FUEL
55506244
1
Warranty Information
For vehicles repaired under the Emission coverage,
use the following labor operation. Reference the
Applicable Warranties section of Investigate Vehicle
History (IVH) for coverage information.
Labor Operation
Description
Vehicle
Labor Time
4088718*
High Pressure Diesel Fuel
Injector and Harness
Diagnosis
All
0.5
Add
Silverado 1500 / Sierra 1500
(2021)
6.1
Add
Silverado LTD (RPO J21, VIN
Digit 5 = W/Y) / Sierra Limited
(RPO J21, VIN Digit 5 = 8/9)
(2022)
6.1
Silverado New (RPO J22, VIN
Digit 5 = A/D) / Sierra New
(RPO J22, VIN Digit 5 = H/U)
(2022)
6.1
Add
High Pressure Diesel Fuel
Injector and Harness
Replacement
Add
Escalade
Add
Suburban
Add
Tahoe
Add
Yukon
6.1
*This is a unique Labor Operation for Bulletin use only.
Version
4
Modified
Released May 05, 2022
Revised June 15, 2022 - Remove DTCs not Applicable to Bulletin and Updated Warranty
Information Section.
Revised August 01, 2022 - Updated Labor Times in Warranty Information section.
Revised January 13, 2022 - Added Tahoe Information to the Warranty Information
section.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these
technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper
service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a
job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your
vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the
information.
WE SUPPORT VOLUNTARY
TECHNICIAN
CERTIFICATION


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.