FT5145R1
Service Bulletin Details
Public Details for: FT5145R1
Due to the lack of bonding surface between the two large roof top panels, when thermal expansion and contraction occur these panels separate and leave an opening
Models from 2021
2021 NOVA BUS LFS |
Models from 2020
2020 NOVA BUS LFS |
FT5145R1 FAST TRACK REFERENCE: Nova Bus Manuals SECTION: 01: Body RS NO: MQR 7621-2086 APPLICATION DEADLINE: 2024MR15 CLAIM REFERENCE NUMBER: WB-5145 EFFECTIVE IN PROD.: N/A SUBJECT: Sika Seams Cracking. JUSTIFICATION: Due to the lack of bonding surface between the two large roof top panels, when thermal expansion and contraction occur these panels separate and leave an opening. LEVEL DIRECT CHARGES DESCRIPTION 1 Addition of 3M tape below the gutter. 2 – TIME LABOUR MATERIAL Novabus Novabus 1h – – – MATERIAL REQUIRED PER VEHICLE QTY PART NO REV. DESCRIPTION – – – – – – LEVEL 1 – LEVEL 2 – LEVEL 1 SHOP SUPPLIES 2 in N8950467 – 3M Extreme Sealing Tape BLACK 50 in N8950481 – 3M Masking Tape 30 ml N8950925 – 3M Marine adhesive 4000 UV, Black 30 ml N8950926 – 3M Adhesive Promoter 111 Materials will be available within 42 days once your order has been placed. To order, please contact [email protected] Or by phone for CANADA 1-800-771-6682, for USA 1-877-999-8808 Specify document number, quantity of parts required and shipping address. DISPOSAL OF PARTS REMOVED PARTS ARE: DISCARDED * RETAINED Yes – * Dispose of the unused parts and the defective parts in accordance with local environmental standards in effect. REVISION HISTORY REV. DATE NR 2022OC21 Initial release Devanand R1 2023JA23 Shop supply parts updated & Procedure updated and Client list updated Devanand APPROVED BY: NQF772001 VERSION 3 CHANGE DESCRIPTION Jean-Nicolas Fournier Digitally signed by Jean-Nicolas Fournier Date: 2023.01.23 16:53:03 -05'00' WRITTEN BY PAGE 1 OF 6 FT5145R1 FAST TRACK Symbol Empty Field Meaning No changes, the procedure applies + Contract added, the procedure applies – Contract removed, the procedure does not apply SYM CLIENT ORDER + New York City Transit New York - NYCT + ROAD NUMBER VIN (2NVY/4RKY...) QTY FROM TO FROM TO LD23 — 9621 L82LXL9777634 L82L5L9777668 3 New York City Transit New York - NYCT LC79 9623 9703 L82L1M9777782 L82LXM9777862 81 New York City Transit New York - NYCT LC79 9704 9784 L82L1M9777863 L82L4M9777954 81 New York City Transit New York - NYCT LD06 8755 8758 L82J3L9777778 L82J3L9777781 4 New York City Transit New York - NYCT LD64 9785 9805 L82L0M9777871 L82L5M9777980 21 New York City Transit New York - NYCT LD64 9806 9806 L82L7M9777981 L82L7M9777981 1 New York City Transit New York - NYCT LD64 9807 9811 L82LXM9777988 L82L1M9777992 5 New York City Transit New York - NYCT LD64 9812 9812 L82L3M9777993 L82L3M9777993 1 New York City Transit New York - NYCT LD64 9813 9828 L82L5M9777994 L82L7M9778015 16 New York City Transit New York - NYCT LD64 9829 9832 L82L4M9778022 L82LXM9778025 4 New York City Transit New York - NYCT LD64 9833 9843 L82L1M9778026 L82LXM9778039 11 New York City Transit New York - NYCT LD64 9844 9844 L82L1M9778043 L82L1M9778043 1 New York City Transit New York - NYCT LD64 9845 9910 L82L3M9778044 L82L1M9778155 66 New York City Transit New York - NYCT LD08 8759 8963 L82J5M9778156 L82J8N9778508 205 PAGE 2 OF 6 NQF772001 VERSION 3 FAST TRACK FT5145R1 WARNING FOLLOW YOUR INTERNAL SAFETY PROCEDURES. 1.1. Park the vehicle on an even surface with the transmission on neutral. 1.2. Apply the parking brake and set the master control switch to the stop position. 1.3. Set the battery disconnect switch in the battery compartment to the off position NOTE This procedure must be performed inside a warm environment. 1.4. The tape will need to be cut along the angle of the door frame. Figure 1 - Tape to be applied on the Door frame 1.5. A jig should be used to cut the tape to the desired angle. Figure 2 - Highlighted area to apply Tape PAGE 3 OF 6 NQF772001 VERSION 3 FAST TRACK 1.6. FT5145R1 Use 3M promoter N8950926 to clean the surface. Figure 3 - Surface Cleaning 1.7. Use jig to outline tape. Figure 4 - Apply Tape PAGE 4 OF 6 NQF772001 VERSION 3 FAST TRACK 1.8. FT5145R1 With tape outline, add an even amount of 3M adhesive N8950925. Figure 5 - Apply Adhesive 1.9. With tape cut, apply even amount of 3M adhesive. Figure 6 - Apply Adhesive PAGE 5 OF 6 NQF772001 VERSION 3 FAST TRACK FT5145R1 1.10. Apply tape press firmly into place be sure to cut the tape inline with the door frame. 1.11. Spread any excess of the 3M adhesive that may have squeezed out from the back around the edges. Figure 7 - Apply Tape on the Door frame 1.12. Remove the tape. Figure 8 - Removal of Tape 1.13. The vehicle can return in service. PAGE 6 OF 6 NQF772001 VERSION 3