A3723082060146_3

Technical Service Bulletin
37 Brief engine speed rise with no display of gear lever position in the instrument cluster
37 23 08 2060146/3 March 6, 2023. Supersedes Technical Service Bulletin Group 37 number 20-02 dated August
21, 2020, for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A3 Cabriolet, and
S3 Cabriolet
2018
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
3
-
Revised Warranty (Updated Labor
Operations)
2
Revised Condition (Corrected typo)
08/21/2020
Revised SVM Table (Added missing
engine code)
1
07/13/2020
Initial publication
Customer states:
• Brief (less than two seconds) sudden increase in the engine speed.
• When the concern occurs, the selected gear is briefly (less than two seconds) not shown in the driver
information system (DIS). This may appear as follows:
a. Instead of D or S showing the display will be blank.
Or
b. Instead of M1 or M2, only the M will appear.
Workshop findings:
• There are no faults stored in the engine control module (ECM), J623 (address word 0001), or the
transmission control module (TCM), J743 (address word 0002).
• There are no oil leaks from the transmission.
Page 1 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
• Duplication of the concern may not be possible as it is very intermittent.
Technical Background
The transmission control module software needs to be updated.
Production Solution
Not applicable.
Service
This TSB replaces Pending Service Solution (PSS) TSB 2058687: PSS 37 Brief engine speed rise with no
display of gear lever position in the instrument cluster.
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the TCM, J743 (address word 0002) using the SVM action code as listed in the table below, if
necessary:
Model Engine/Transmission
Old Software
Old
New Software
New
SVM Code
Part Number
Software
Part Number
Software
Input
Version
Version
(or higher)
A3
CZRA/0GC
0GC300042J
1402
0GC300042J
1423
S3
DJJA or CYFB/0GC
0GC300012A
1403
0GC300012A
1425
S3
DJJA/0GC
0GC300012A
1422
0GC300012A
1425
02A212
Warranty
Claim Type:
• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
Page 2 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
• If the vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
3730
Damage Code:
0041
Labor Operations:
Software Update (TCM)
0151 0000
Time stated on
the diagnostic
protocol (Max 60
TU)
Diagnostic Time:
GFF
No allowance
0 TU
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
0121 0004
10 TU
As per TSB 2060146/3
Claim Comment:
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB (2060146) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 3 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.