TJ32525

VOLVO CAR
SERVICE AND PARTS BUSINESS
Technical Journal
TITLE:
DIM message “Parking brake service required”
REF NO:
ISSUING DEPARTMENT:
CAR MARKET:
TJ 32525.4.0
Technical Service
United States and Canada
PARTNER:
ISSUE DATE:
STATUS DATE:
3 US 7510 Volvo Car USA
2018-01-29
2018-02-14
FUNC GROUP:
FUNC DESC:
3710
Cables
Page 1 of 25
“Right first time in Time”
Attachment
File Name
TJ32525.JPG
TJI-503688-2_1_2_en-US.pdf
TJI-503692-2_1_1_en-US.pdf
File Size
0.1931 MB
3.5583 MB
3.8535 MB
Vehicle Type
Type
Eng
Eng
Desc
Sales
Body
Gear
Steer
234
235
Model Year
2017-9999
2017-9999
Plant
Chassis range
-
Struc Week
Range
201617-999952
201624-999952
CSC Customer Symptom Codes
Code
PK
Description
Parking brake/No/reduced/incorrect function
VST Operation Number
VST Operation Number
98663-2
Description
Cutting of cable harness acc. to TJ
Produced in the USA and available as an electronic document. Hard copy documents are printed in USA on recycled paper containing
a minimum of 50% wastepaper and 10% post-consumer waste.
© 2018 VOLVO CAR USA, LLC
Technical Journal 32525.4.0
DTC Diagnostic Trouble Codes
Control Module
BCM
BCM
BCM
BCM
BCM
BCM
Code
C20081B
C200713
C200E29
C200574
C20071B
B111177
Fault Type
Permanent
Permanent
Permanent
Permanent
Permanent
Permanent
Rows beginning with * are modified
Note! If using a printed copy of this Technical Journal, first check for the latest online version.
Text
DESCRIPTION:
If the DIM message “Parking Brake Service required” appears in the DIM and applicable DTC’s are
present, please follow instructions under “Service”.
*Changes in this version:
- DTC added, BCM-C20081B.
- Repair instructions with new part number.
- Spare parts are now available through normal channels i.e. parts department.
DIM = Driver Information Module
BCM = Brake Control Module
SERVICE:
*NOTE: The DTC’s may have been set due to other reasons then damaged wiring.
*Please study typical examples of damaged areas in the attachment “TJ32525.jpg” before replacing any
harness.
Check wire harness for the emergency parking brake on the rear control arm(s), if wires are damaged.
Perform repair as per attached instructions.
TJI 503688 - right hand side
TJI 503692 - Left hand side
VEHICLE REPORT:
Yes, please submit a Vehicle Report if the service solution described in this TJ has no effect. Use
concern area “Vehicle Report” and sub concern area “Support not needed”, use function group 3760.
To view TJ attachments continue to next page. This TJ has three attachments.
Page 2 of 25
2018-02-14
Technical Journal 32525.4.0
2018-02-14
Page 3 of 25
Title
Volvo Car Customer Service
Joining wires, right
Action
Issue
2
1
Product fix
Date
2018-01
2017-05
TJ Instruction VCC-503688-2
Page
1 ( 11 )
Operation number:
98663-2
Reason
Materials list change
First issue
Affected vehicles
Model year Model
2017
S90 (17-)
2017, 2018 V90 (17-)
Materials
Electrical tape
Tape
Kit
Designation
Angle drill machine
Qty.
0.1
0.1
1.0
Materials
Part No.
9511028
1985615
32214495
Equipment
Part No.
Notes
Consumable;
WURTH Part Number; Consumable;
TJ Instruction VCC-503688-2
Page 2 ( 11 )
Removal
Note! Removal steps in this procedure may
contain installation details.
Orientation view
TJ Instruction VCC-503688-2
Page 3 ( 11 )
Color symbols
Note! This colour chart displays (in colour
print and electronic version) the importance
of the different colours used in the images
of the method steps.
1 . Used for focused component, the
component with which you will do
something.
2 . Used as extra colors when you need to show
or differentiate additional parts.
3 . Used for attachments that are to be
removed/installed. May be screws, clips,
connectors, etc.
4 . Used when the component is not fully
removed from the vehicle but only hung to
the side.
5 . Used for standard tools and special tools.
6 . Used as background color for vehicle
components.
Set the vehicle to Inactive mode, described in
user mode , refer to:
General Information
3 - Electrical system
30 - General
300 - general
Remove the right rear wheel , refer to:
Removal, replacement and installation
7 - Springs and wheels
77 - Wheels, tyres, hubs
771 - wheel and wheel trim
TJ Instruction VCC-503688-2
Page 4 ( 11 )
Note! Orientation view
Remove the screws.
Remove the clips.
Remove the marked part.
TJ Instruction VCC-503688-2
Page 5 ( 11 )
Loosen the clips.
Disconnect the connector.
Disconnect the connector.
Loosen the fastener.
TJ Instruction VCC-503688-2
Page 6 ( 11 )
Loosen the clip.
Loosen the clips.
TJ Instruction VCC-503688-2
Page 7 ( 11 )
Loosen the clip.
Cut
This step is performed on new component.
Installation
Carry out splicing of wire , refer to:
Cleaning, Inspection and Adjustment
3 - Electrical system
37 - Cables and fuses
371 - cables
TJ Instruction VCC-503688-2
Page 8 ( 11 )
1.
2.
Use: Electrical tape , 9511028
Use: Tape , 9511071
Position wire as illustrated.
Install the clip(s).
TJ Instruction VCC-503688-2
Page 9 ( 11 )
Measure from upper flange edge.
Mark using a pen
Position wire as illustrated.
Use: Angle drill machine
TJ Instruction VCC-503688-2
Page 10 ( 11 )
Install the clip(s).
Position wire as illustrated.
Install the clip(s).
TJ Instruction VCC-503688-2
Page 11 ( 11 )
View from below
Mark using a pen
Install the clip(s).
To install, reverse the removal procedure.
Title
Volvo Car Customer Service
Joining wires, left
Action
Issue
1
2
TJ Instruction VCC-503692-2
Product fix
Date
2017-05
2018-01
Page
1 ( 11 )
Operation number:
98663-2
Reason
First issue
Materials list change
Affected vehicles
Model year Model
2017
S90 (17-)
2017, 2018 V90 (17-)
Materials
Strip clamp
Electrical tape
Tape
Kit
Designation
Angle drill machine
Qty.
1.0
0.1
0.1
1.0
Materials
Part No.
983671
9511028
1985615
32214494
Equipment
Part No.
Notes
Consumable;
WURTH Part Number; Consumable;
TJ Instruction VCC-503692-2
Page 2 ( 11 )
Removal
Note! Removal steps in this procedure may
contain installation details.
Orientation view
TJ Instruction VCC-503692-2
Page 3 ( 11 )
Color symbols
Note! This colour chart displays (in colour
print and electronic version) the importance
of the different colours used in the images
of the method steps.
1 . Used for focused component, the
component with which you will do
something.
2 . Used as extra colors when you need to show
or differentiate additional parts.
3 . Used for attachments that are to be
removed/installed. May be screws, clips,
connectors, etc.
4 . Used when the component is not fully
removed from the vehicle but only hung to
the side.
5 . Used for standard tools and special tools.
6 . Used as background color for vehicle
components.
Set the vehicle to Inactive mode, described in
user mode , refer to:
General Information
3 - Electrical system
30 - General
300 - general
Remove the left rear wheel , refer to:
Removal, replacement and installation
7 - Springs and wheels
77 - Wheels, tyres, hubs
771 - wheel and wheel trim
TJ Instruction VCC-503692-2
Page 4 ( 11 )
Note! Orientation view
Remove the screws.
Remove the clips.
Remove the marked part.
TJ Instruction VCC-503692-2
Page 5 ( 11 )
Loosen the clips.
Disconnect the connector.
Disconnect the connector.
Loosen the fastener.
TJ Instruction VCC-503692-2
Page 6 ( 11 )
Loosen the clip.
Loosen the clips.
TJ Instruction VCC-503692-2
Page 7 ( 11 )
Note! Make sure that a new component is
installed.
Loosen the clips.
Use: Strip clamp , 983671
Cut
TJ Instruction VCC-503692-2
Page 8 ( 11 )
This step is performed on new component.
Installation
Carry out splicing of wire , refer to:
Cleaning, Inspection and Adjustment
3 - Electrical system
37 - Cables and fuses
371 - cables
1.
2.
Use: Electrical tape , 9511028
Use: Tape , 9511071
TJ Instruction VCC-503692-2
Page 9 ( 11 )
Position wire as illustrated.
Install the clip(s).
Measure from upper flange edge.
Mark using a pen
TJ Instruction VCC-503692-2
Page 10 ( 11 )
Position wire as illustrated.
Use: Angle drill machine
Install the clip(s).
TJ Instruction VCC-503692-2
Page 11 ( 11 )
Position wire as illustrated.
View from below
Mark using a pen
Install the clip(s).
To install, reverse the removal procedure.