NCU-2023030011
Service Bulletin Details
Public Details for: NCU-2023030011
Check upper transverse control arm of front axle on left and right, replace upper transverse control arm if necessary
- 2023 - 2022 - 2021 - 2020 - 2019 -
Models from 2023
2023 MERCEDES-BENZ AMG GLE53 |
2023 MERCEDES-BENZ AMG GLE63 S |
2023 MERCEDES-BENZ GLE350 |
2023 MERCEDES-BENZ GLE450 |
2023 MERCEDES-BENZ GLE580 |
Models from 2022
2022 MERCEDES-BENZ AMG GLE53 |
2022 MERCEDES-BENZ AMG GLE63 |
2022 MERCEDES-BENZ AMG GLE63 S |
2022 MERCEDES-BENZ GLE350 |
2022 MERCEDES-BENZ GLE450 |
2022 MERCEDES-BENZ GLE580 |
Models from 2021
Models from 2020
2020 MERCEDES-BENZ AMG GLE43 |
2020 MERCEDES-BENZ AMG GLE63 |
2020 MERCEDES-BENZ GLE350 |
2020 MERCEDES-BENZ GLE350 E |
2020 MERCEDES-BENZ GLE450 |
2020 MERCEDES-BENZ GLE580 |
Models from 2019
2019 MERCEDES-BENZ AMG GLE43 |
2019 MERCEDES-BENZ AMG GLE63 |
2019 MERCEDES-BENZ GLE 550E |
2019 MERCEDES-BENZ GLE350 |
2019 MERCEDES-BENZ GLE400 |
WORK DESCRIPTION FOR FIELD MEASURE Code: 22P3290105 Version: 2.0 Check upper transverse control arm of front axle on left and right, replace upper transverse control arm if necessary Model 167 Check/test procedure 1. Remove left and right front wheel and tire assembly. For basic data, see AR40.10-P-1102ME 2. Remove nut (2, Figure 1) at upper transverse control arm (1, Figure 1). For basic data, see AR33.20-P-0500ME Figure 1 3. Check spherical cap in area (A, Figure 2). clean area. Do not damage air bellows while doing this. A Figure 2 1/2 Field measure management GSP/TPR Code: 22P3290105 Version: 2.0 Figure 3 a. If groove (B, Figure 2 or 3) is not present : Carry out work procedure . b. If groove (B, Figure 2 or 3) is present:End measure. Work procedure 1. Replace upper transverse control arm (1, Figure 1). For basic data, see AR33.20-P-0500ME. 2. Assemble in reverse order. Parts Quantity Designation Part no. As required Upper transverse control arm * * The required transverse control arm must be determined via the parts job in the XENTRY Portal for the vehicle identification number Small parts such as screws, lock nuts, sealing rings, cable ties, fluids, sealant, etc. are not listed in the parts list. The required small parts are taken into account in the budgeting. Operation text and flat rate Operation Operation text Flat rate no. 12-1655 Check upper transverse control arm on left 1.0 h and right of front axle 12-1656 Replace upper transverse control arm of 4.3 h front axle (after check) Accounting no./ damage code 32 901 05 32 901 05 Mercedes-Benz Global Service & Parts 2/2 Field measure management GSP/TPR