TT261401a

Tech Tips
Date: April 18, 2014
TT 26-14-01
2011-2014 Touareg - 3.0L TDI Ad Blue® Reset Procedure
Update to information: May 23, 2014.
To reset the Ad Blue level light after the tank has been filled:
Go to Guided Fault Finding:
From the control module list view: Right click on the ECM.
Select Guided Functions > SCR system functions > Ad Blue level to full"
If the light is still present after the reset procedure:
1.
ECM control module OBD
2.
DTC memory
3.
Erase DTC all OBD system (even if there are no faults)
4.
Cycle the key off and on
5.
Light in the cluster should go off
6.
If the light still does not go off, then follow the procedures in GFF.
If light still will not reset, remove fuse S17 from ECM cowling panel and start engine to set system faults.
Reinstall fuse, clear codes, start engine and verify light has reset.
Page 1 of 1
ver1.2
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.