2051937.8

Technical product information
Topic
Market
area
Front centre console lid (cup holder assembly) fails to latch/unlatch
Australia E04 Bentley rest Asia and Australia (6E04),China 796 VW Import Comp. Ltd (Vico), Beijing (6796),Germany E02 Bentley
rest Europe (6E02),Japan E03 Bentley Japan (6E03),Korea, (South) E08 Bentley South Korea (6E08),United Arab Emirates E06
Bentley Middle East and Africa (6E06),United Kingdom E01 Bentley UK (6E01),United States E05 Bentley USA and rest America
(6E05)
Bentley
Brand
Transaction
2051937/8
No.
Level
EH
Status
Approval
Release
date
New customer code
Object of complaint
Complaint type
Position
body fixtures and fittings -> trays, storage compartments, handles
component / consumables
body fixtures and fittings -> operation of storage compartments, trims functionality
Vehicle data
New Continental GT/C and New Flying Spur
Sales types
Type
3S3*
3S3*
3S3*
3S3*
3S3*
3S3*
3S4*
3S4*
3S4*
3S4*
3S4*
ZG2*
ZG2*
ZG2*
ZG2*
MY
2018
2019
2020
2021
2022
2023
2019
2020
2021
2022
2023
2020
2021
2022
2023
Brand Designation Engine code Gearbox code Final drive code
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
E
*
*
*
Documents
Document name
master.xml
beslux.pdf
molykote112highconsistencyvalvesealant.pdf
molykote_high-vacuum_grease_22-0911h-01.pdf
tdsg.beslux.pdf
vickerlube-fg-3hdc-grease-2-1.pdf
INTERNAL
Technical product information
Front centre console lid (cup holder assembly) fails to latch/unlatch
Transaction No.: 2051937/8
Customer statement / workshop findings
Centre console storage box lid (cup holder assembly) fails to latch or unlatch
Technical background
Application of grease to both of the centre console storage box frame ribs (Figure 1) as described within the Measure section is required
CAUTION
Refer to the attached specification sheets to ensure the correct grease is sourced and applied, any of the products within the attached
specification sheets can be used
IMPORTANT: DO NOT USE ANY OTHER TYPE OF GREASE OTHER THAN THE TYPES THAT ARE LISTED WITHIN THE
ATTACHED SPECIFICATION SHEETS
•
The grease must be sourced locally from your consumables supplier
NOTICE
Hint: For clarity Figure 1 shows the centre console storage box linkage removed
NOTE: Removal of the storage box linkage is not required when conducting the instructions within the Measure section
Figure 1
Production change
-
Measure
Ensure all trim and leather components are suitably protected during this procedure as warranty payments will not be
considered for any damage of trim or leather components on or around the vicinity of the centre console
1) Remove the front centre console facia panel - Refer to Workshop manual Rep.Gr 68 - Front centre console facia panel - To remove and fit
IMPORTANT: Before applying the grease, the storage box and/or ribs must not be damaged/worn, the operative should also
confirm there is no evidence of liquid spillage (for example coffee/sugary deposits) on the mechanism, in this scenario the
mechanism/ribs must be thoroughly cleaned before applying the grease
2) Referring to Figure 2 - Using a suitable/clean brush - Apply a thin film of grease (as per the attached specification sheets) evenly to both ribs
TIP: To ensure the even application of grease to both of the ribs - Push the heart curve to the highest and lowest points and apply the grease
INTERNAL
Figure 2
3) On completion (grease applied to both ribs) - Check the storage box lid latches correctly by latching and unlatching the storage box lid 10
times
NOTICE
In the event the issue is still evident after conducting the previous steps (storage box lid fails to latch/unlatch) the operative must raise a
Technical DISS query and await feedback before conducting any further work
Or
Should the issue now be resolved - Refit the front centre console facia panel - Refer to Rep.Gr 68 - Front centre console facia panel - To remove
and fit
4) Once the front centre console has been refitted - Check the storage box lid latches correctly by latching and unlatching the storage box lid a
further 10 times
Warranty accounting instructions
Warranty Type
Labour Operation Code
Damage Service Number
Damage Code
Time
110 or 910
68 30 41 00
68 30
00 10
70 Time units
Parts information
Please see the attached specification sheets all grease must be sourced locally from your consumables supplier
INTERNAL
Transportation & Industrial
MOLYKOTE® High-Vacuum
Grease
Stiff, nonmelting silicone lubricating material
Features & benefits
Typical properties
• Reduces wear in plastic-to-metal and rubber-to-metal contact
• Low volatility
• Excellent resistance to water, chemicals, and high and low
temperatures
• Meets requirements of FDA 21 CFR 175.300
Specification writers: These values are not intended for use in
preparing specifications. Please contact your local MOLYKOTE®
sales representative prior to writing specifications on this product.
Standard(1)
Composition
• Silicone oil
• Inorganic thickener
Applications
Seals and lubricates chemical processing equipment. Lubricating
plug valves, control valves, flow meter bearings, ceramic plug
cocks, fire extinguisher valves, water treating equipment, synthetic
rubber gaskets and seals in high-temperature applications.
Sealing vacuum and pressure systems. Lubricating O-rings in
binoculars and telescopes; prevents fogging of delicate lenses.
Performance data
Solubility
MOLYKOTE® High-Vacuum Grease is insoluble in water,
methanol, ethanol, acetone, glycol and glycerine. It can be
dispersed in kerosene, Stoddard solvent, benzene, toluene, ethyl
ether or petroleum ether.
Chemical resistance
MOLYKOTE® High-Vacuum Grease is unaffected by most
vegetable and minerals oils, many organic compounds, and most
common gases. It is also resistant to most aqueous solutions of
inorganic salts and to dilute acids and alkalies. The suitability of
MOLYKOTE® High-Vacuum Grease should always be tested
before the material is adopted for regular use.
Handling precautions
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE
USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE
HANDLING, READ SAFETY DATA SHEETS AND CONTAINER
LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD
INFORMATION.
Test
Unit
Result
Color
White to gray,
translucent
Physical nature
Stiff
compound
ISO 2137
Penetration, unworked
mm/10
170 to 230
ISO 2137
Penetration, worked 60,
maximum
mm/10
<260
CTM 0033A
A
Bleed, 24 hours; 200°C
%
<0.5
CTM 0033A
B
Evaporation, 24 hours;
200°C
%
<2.0
Melting point
°C
None
ISO: International Organization for Standardization. CTM: Corporate
Test Method; copies of CTMs are available on request.
(1)
Usable life and storage
When stored at or below 30°C in the original unopened
containers, this product has a usable life of 60 months from the
date of production.
Packaging
This product is available in different standard container sizes.
Detailed container size information should be obtained from your
nearest MOLYKOTE® sales office or MOLYKOTE® distributor.
DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc.
unless otherwise noted.
© 1997-2019 DuPont.
The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal
range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish
specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy
themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our
control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product,
evaluation under end use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a recommendation to
infringe on patents.
Form No. 22-0911H-01 (08/19) AGP16109
H.S.T.N: 27101999
REF:
MKT.PDS.87
REV:
6
VICKERLUBE FG
3HDC GREASE 2
PART NUMBER
25562
DESCRIPTION
VICKERLUBE FG 3HDC GREASE 2 is a general purpose pharmaceutical white oil based, inorganic thickened, food
grade grease It is registered to 3H for direct contact applications to act as a release agent, lubricant and corrosion
protector for use in and around food, beverage and pharmaceutical processing and production areas.
APPLICATIONS
It is designed for use on equipment and machinery working in potential direct contact with food stuffs in food and
other clean industries. The grease has high adhesive properties and is extremely water resistant. It is ideal for
applications where water wash down is present and there is a chance of food contact such as slaughterhouses,
butcheries, blades on chopping and mincing machines, canning and bottling plants.
Applications include: • Roller and ball bearings in direct contact applications
• Bakery loaf pans and equipment
• Slaughterhouse and abattoir equipment
• Slides and guides
• Saw blades and chopping and dicing dies
• Medical equipment
CERTIFICATION
VICKERLUBE FG 3HDC GREASE 2 is 3H Registered – 161275, for direct food contact, Halal Certified, Kosher
Certified, manufactured to ISO 9001:2015 and ISO 21469.
FEATURES AND BENEFITS
• 3H Registered
• Silica thickened
• Supreme corrosion protection
• Odourless and colourless
• Extremely adhesive
Safe to use where direct food contact may occur
Good thermal stability
Increased component and lubricant life
Will not taint food
Lowers lubricant usage
H.S.T.N: 27101999
REF:
MKT.PDS.87
REV:
6
VICKERLUBE FG
3HDC GREASE 2
METHOD OF APPLICATION
VICKERLUBE FG 3HDC GREASE 2 can be applied manually, with a standard pressure grease gun (via cartridge).
TYPICAL CHARACTERISTICS AND PROPERTIES
VICKERLUBE FG 3HDC GREASE 2
TEST METHOD
RESULT
Appearance
Visual
Smooth Translucent Grease
Thickener
NLGI Grade
Inorganic
ASTM D217
Base Oil
NLGI 2
Pharmaceutical White Oil
Base Oil Viscosity (40°C) (cSt)
ASTM D7152
95
Dropping Point (°C)
ASTM D2265
>300
Copper Corrosion
ASTM D4048
1b
Temperature Range (°C)
-15 to 130
Shelf Life
3 years in original sealed containers
whilst stored out of direct sunlight
Vickers Oils, its officers, employees and agents assume no responsibility and shall not be liable to any person for any loss, damage or expense
caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with Vickers
Oils for the provision of this information or advice and in that case responsibility or liability is exclusively on the terms and conditions set out in that
contract. Products should only be used for the applications specified. The supplier cannot accept responsibility if they are used in any other
application.
Transportation & Industrial
MOLYKOTE® 112 High
Consistency Valve Sealant
Lubricant and sealing material for plastic and rubber valves and bearings
Features
•
•
•
•
•
•
Nonmelting
Low volatility
Thermally stable
Serviceability from -40 to 450°F (-40 to 232°C)
Excellent water and oil resistance
Good resistance to most chemicals
Typical properties
Specification writers: These values are not intended for use in
preparing specifications. Please contact your local MOLYKOTE®
sales representative prior to writing specifications on this product.
Standard(1)
Composition
Description
Applications
This product is similar to MOLYKOTE® 111 Valve Lubricant and
Sealant and is used in applications where a higher degree of
mechanical stability is desired.
Chemical processing
Because of chemical resistance, long service life, and
temperature stability, MOLYKOTE® 112 High Consistency Valve
Sealant is used as a valve, O-ring, and plug-valve lubricant. It is
also an effective lubricant for control valves and pressure plug
valves, a sealant for vacuum and pressure systems, and a
chemical barrier coating.
Result
Color
Whitetranslucent
Penetration
• Inert amorphous silica filler
• Selected polydimethyl silicone fluids
MOLYKOTE® 112 High Consistency Valve Sealant will not
carbonize at serviceability temperatures; has a very low vapor
pressure; and will resist melting or hardening during long
exposure to elevated temperatures. It is insoluble in water,
methanol, ethanol, glycol, and glycerine; resistant to most
aqueous solutions of inorganic salts, dilute acids, and alkalis; and
unaffected by most vegetable and mineral oils, many organic
compounds, and most common gases. MOLYKOTE® 112 High
Consistency Valve Sealant should be thoroughly tested in the
specific application prior to use.
Unit
Physical
CTM 0176
MOLYKOTE® 112 High Consistency Valve Sealant, a greaselike
compound, is a stiff, nonmelting silicone material used primarily as
a valve lubricant and sealer.
Test
CTM 0033A
CTM 0033A
ASTM
D4049
CTM 0022
unworked
215
worked 60 strokes,
maximum
230
worked 100,000 strokes
240
Bleed, 24 hours/
392°F (200°C)
%
0.03
%
0.8
Service temperature
range
°F (°C)
-40 to 450
(-40 to 232)
Water spray-off
%
3.0
Evaporation, 24 hours/
392°F (200°C)
Melting point
None
Specific gravity at
77°F (25°C)
1.1
Electrical
CTM 0112
CTM 0112
CTM 0114
CTM 0171
Dielectric constant at
100 Hz
2.93
100 kHz
2.92
Dissipation factor at
100 Hz
< 0.0001
100 kHz
< 0.004
Dielectric strength,
50 mil gap
volts/mil
490
Volume resistivity at
73°F (23°C)
ohm-cm
2.9 x 1015
Arc resistance
seconds
122
CTMs (Corporate Test Methods) correspond to standard ASTM
(American Society for Testing and Materials) tests in most instances.
Copies of CTMs are available upon request.
(1)
Mechanical device manufacturing
An excellent plastic and rubber lubricant, MOLYKOTE® 112 High
Consistency Valve Sealant may be used on devices that require
temperature and mechanical stability, such as flow meters, fire
extinguisher valves, and lock mechanisms. It has also been used
as an O-ring lubricant on binoculars and telescopes, a damping
medium in hydraulic pivots, a direct-contact transducer medium in
extruders, and a miniature bearing seal.
Handling precautions
Equipment manufacturing
MOLYKOTE® 112 High Consistency Valve Sealant helps prevent
sticking of valves and O-rings at high temperatures or in freezing
conditions. It also acts as an excellent sealer between synthetic
rubber or plastic parts in contact with metal in vacuum or
pressure systems.
MOLYKOTE® 112 High Consistency Valve Sealant has a shelf
life of 60 months from date of manufacture.
Harsh operating conditions
Special properties such as low volatility and excellent chemical
resistance permit use of MOLYKOTE® 112 High Consistency
Valve Sealant in high vacuum or pressure systems, and in high
temperature atmospheres.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE
USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE
HANDLING, READ SAFETY DATA SHEETS AND CONTAINER
LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD
INFORMATION.
Usable life and storage
Packaging
MOLYKOTE® 112 High Consistency Valve Sealant is available in
5.3 oz (150 g) tubes, 40 lb (18.1 kg) pails, and 440 lb (200 kg)
drums, all weights net.
How to use
Surfaces should be thoroughly cleaned before applying
MOLYKOTE® 112 High Consistency Valve Sealant.
Even though MOLYKOTE® 112 High Consistency Valve Sealant
is very tacky and a large pressure drop occurs when pumping
this material, normal grease equipment can be used. However,
pumping over a long distance is not recommended.
If MOLYKOTE® 112 High Consistency Valve Sealant must
penetrate surfaces to give adequate protection, it can be
dispersed in typical penetrating solvents. It is insoluble in water,
methanol, ethanol, acetone, glycol, and glycerine.
NOTE: When using any solvent, always provide adequate
ventilation. Follow precautions on solvent container label.
DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc.
unless otherwise noted.
© 1997-2019 DuPont.
The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal
range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish
specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy
themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our
control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product,
evaluation under end use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a recommendation to
infringe on patents.
Form No. 10-727A-01 (08/19) AGP16109
SAFETY DATA SHEET
(in accordance with Regulation (EU) 2015/830)
95303-G. BESLUX XP-3012
Version: 1
Revision date: 14/02/2017
Page 1 of 7
Print date: 14/02/2017
SECTION 1: IDENTIFICATION OF THE MIXTURE AND OF THE COMPANY/UNDERTAKING.
1.1 Product identifier.
Product Name:
Product Code:
G. BESLUX XP-3012
95303
1.2 Relevant identified uses of the mixture and uses advised against.
Lubricant grease
Uses advised against:
Uses other than those recommended.
1.3 Details of the supplier of the safety data sheet.
BRUGAROLAS, S.A.
Company:
Address:
City:
Province:
Telephone:
Fax:
E-mail:
Web:
Camí de la Riera 36-44 P.I. Cova Solera
08191 Rubí
Barcelona
+34935883100
+34935883101
[email protected]
www.brugarolas.com
1.4 Emergency telephone number: +34935883100 (Only available during office hours; Monday-Friday; 08:00-18:00)
SECTION 2: HAZARDS IDENTIFICATION.
2.1 Classification of the mixture.
In accordance with Regulation (EU) No 1272/2008:
Aquatic Chronic 3 : Harmful to aquatic life with long lasting effects.
2.2 Label elements.
Labelling in accordance with Regulation (EU) No 1272/2008:
H statements:
H412
Harmful to aquatic life with long lasting effects.
P statements:
P273
P501
Avoid release to the environment.
Dispose content and container as dangerous waste.
2.3 Other hazards.
In normal use conditions and in its original form, the product itself does not involve any other risk for health and the environment.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS.
3.1 Substances.
Not Applicable.
3.2 Mixtures.
Substances posing a danger to health or the environment in accordance with the Regulation (EC) No. 1272/2008, assigned a
Community exposure limit in the workplace, and classified as PBT/vPvB or included in the Candidate List:
SAFETY DATA SHEET
(in accordance with Regulation (EU) 2015/830)
95303-G. BESLUX XP-3012
Version: 1
Revision date: 14/02/2017
Identifiers
Index No: 015-17100-7
EC No: 406-940-1
Registration No: 010000015643-71-XXXX
Page 2 of 7
Print date: 14/02/2017
Name
O,O,O-tris(2(or 4)-C9-10-isoalkylphenyl)
phosphorothioate
Concentrate
2,5 - 5 %
(*)Classification - Regulation (EC)
No 1272/2008
specific
Classification
concentration
limit
Aquatic Chronic
2, H411
-
(*)The complete text of the H phrases is given in section 16 of this Safety Data Sheet.
SECTION 4: FIRST AID MEASURES.
4.1 Description of first aid measures.
In case of doubt or when symptoms of feeling unwell persist, get medical attention. Never administer anything orally to persons
who are unconscious.
Inhalation.
If wearing contact lenses, remove them. If breathing is irregular or stops, perform artificial respiration. Do not administer
anything orally. If unconscious, place them in a suitable position and seek medical assistance.
Eye contact.
If wearing contact lenses, remove them. Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling
eyelids up, and seek medical assistance.
Skin contact.
Remove contaminated clothing. Wash skin vigorously with water and soap or a suitable skin cleaner. NEVER use solvents or
thinners.
Ingestion.
If accidentally ingested, seek immediate medical attention. Keep calm. NEVER induce vomiting.
4.2 Most important symptoms and effects, both acute and delayed.
No known acute or delayed effects from exposure to the product.
4.3 Indication of any immediate medical attention and special treatment needed.
In case of doubt or when symptoms of feeling unwell persist, get medical attention. Never administer anything orally to persons
who are unconscious.
SECTION 5: FIREFIGHTING MEASURES.
The product is NOT classified as flammable, in case of fire the following measures should be taken:
5.1 Extinguishing media.
Recommended extinguishing methods.
Extinguisher powder or CO2. In case of more serious fires, also alcohol-resistant foam and water spray. Do not use a direct
stream of water to extinguish.
5.2 Special hazards arising from the mixture.
Special risks.
Fire can cause thick, black smoke. As a result of thermal decomposition, dangerous products can form: carbon monoxide, carbon
dioxide. Exposure to combustion or decomposition products can be harmful to your health.
SAFETY DATA SHEET
(in accordance with Regulation (EU) 2015/830)
95303-G. BESLUX XP-3012
Version: 1
Revision date: 14/02/2017
Page 3 of 7
Print date: 14/02/2017
5.3 Advice for firefighters.
Use water to cool tanks, cisterns, or containers close to the heat source or fire. Take wind direction into account. Prevent the
products used to fight the fire from going into drains, sewers, or waterways.
Fire protection equipment.
According to the size of the fire, it may be necessary to use protective suits against the heat, individual breathing equipment,
gloves, protective goggles or facemasks, and gloves.
SECTION 6: ACCIDENTAL RELEASE MEASURES.
6.1 Personal precautions, protective equipment and emergency procedures.
For exposure control and individual protection measures, see section 8.
6.2 Environmental precautions.
Product dangerous for the environment, in case of large spills or if the product contaminates lakes, rivers, or sewers, inform the
responsible authorities according to local legislation. Prevent the contamination of drains, surface or subterranean waters, and the
ground.
6.3 Methods and material for containment and cleaning up.
The contaminated area should be immediately cleaned with an appropriate de-contaminator. Pour the decontaminator on the
remains in an opened container and let it act various days until no further reaction is produced.
6.4 Reference to other sections.
For exposure control and individual protection measures, see section 8.
For later elimination of waste, follow the recommendations under section 13.
SECTION 7: HANDLING AND STORAGE.
7.1 Precautions for safe handling.
For personal protection, see section 8. Never use pressure to empty the containers. They are not pressure-resistant containers.
In the application area, smoking, eating, and drinking must be prohibited.
Follow legislation on occupational health and safety.
Keep the product in containers made of a material identical to the original.
7.2 Conditions for safe storage, including any incompatibilities.
Store according to local legislation. Observe indications on the label. Store the containers between 5 and 35 ºC, in a dry and wellventilated place, far from sources of heat and direct solar light. Keep far away from ignition points. Keep away from oxidising
agents and from highly acidic or alkaline materials. Do not smoke. Prevent the entry of non-authorised persons. Once the
containers are open, they must be carefully closed and placed vertically to prevent spills.
The product is not affected by Directive 2012/18/EU (SEVESO III).
7.3 Specific end use(s).
Industrial and professional use, described in 1.2.
SAFETY DATA SHEET
(in accordance with Regulation (EU) 2015/830)
95303-G. BESLUX XP-3012
Version: 1
Revision date: 14/02/2017
Page 4 of 7
Print date: 14/02/2017
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION.
8.1 Control parameters.
The product does NOT contain substances with Professional Exposure Environmental Limit Values. The product does NOT contain
substances with Biological Limit Values.
Concentration levels DNEL/DMEL:
Name
O,O,O-tris(2(or 4)-C9-10-isoalkylphenyl)
phosphorothioate
N. CAS:
N. CE: 406-940-1
DNEL/DMEL
DNEL
(Workers)
Type
Inhalation, Long-term, Systemic effects
Value
16
(mg/m³)
DNEL: Derived No Effect Level, level of exposure to the substance below which adverse effects are not anticipated.
DMEL: Derived Minimal Effect Level, exposure level corresponding to a low risk, that risk should be considered a tolerable
minimum.
8.2 Exposure controls.
Measures of a technical nature:
Provide adequate ventilation, which can be achieved by using good local exhaust-ventilation and a good general exhaust system.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES.
9.1 Information on basic physical and chemical properties.
Appearance: HOMOGENEOUS GREASE
Colour (*): TRANSLUCENT WHITE
Odour: N/A
pH: N/A
Dropping point: >300 ºC
Boiling point: >300 ºC
Flash point: >200 ºC
Relative density: 0,8650 g/cm3 at 20 ºC
Hydrosolubility: INSOLUBLE
Auto-ignition temperature: N/A ºC
N.A./N.A. = Not Available/Not Applicable due to the nature of the product
9.2 Other information.
Kinematic viscosity: N/A cSt at N/A ºC
(*) Due to the characteristics of the product may have slight variations in its colour tone.
SECTION 10: STABILITY AND REACTIVITY.
10.1 Reactivity.
The product does not present hazards by their reactivity.
10.2 Chemical stability.
Unstable in contact with:
- Acids.
- Bases.
- Oxidizing agents.
SAFETY DATA SHEET
(in accordance with Regulation (EU) 2015/830)
95303-G. BESLUX XP-3012
Version: 1
Revision date: 14/02/2017
Page 5 of 7
Print date: 14/02/2017
10.3 Possibility of hazardous reactions.
In certain conditions this may cause a polymerization reaction.
10.4 Conditions to avoid.
Avoid the following conditions:
- Heating.
- High temperature.
- Contact with incompatible materials.
10.5 Incompatible materials.
Avoid the following materials:
- Acids.
- Bases.
- Oxidizing agents.
10.6 Hazardous decomposition products.
Depending on conditions of use, can be generated the following products:
- COx (carbon oxides).
- Organic compounds.
SECTION 11: TOXICOLOGICAL INFORMATION.
11.1 Information on toxicological effects.
There are no tested data available on the product.
Repeated or prolonged contact with the product can cause the elimination of oil from the skin, giving rise to non-allergic contact
dermatitis and absorption of the product through the skin.
Splatters in the eyes can cause irritation and reversible damage.
a) acute toxicity;
Not conclusive data for classification.
b) skin corrosion/irritation;
Not conclusive data for classification.
c) serious eye damage/irritation;
Not conclusive data for classification.
d) respiratory or skin sensitisation;
Not conclusive data for classification.
e) germ cell mutagenicity;
Not conclusive data for classification.
f) carcinogenicity;
Not conclusive data for classification.
g) reproductive toxicity;
Not conclusive data for classification.
h) STOT-single exposure;
Not conclusive data for classification.
i) STOT-repeated exposure;
Not conclusive data for classification.
j) aspiration hazard;
Not conclusive data for classification.
SAFETY DATA SHEET
(in accordance with Regulation (EU) 2015/830)
95303-G. BESLUX XP-3012
Version: 1
Revision date: 14/02/2017
Page 6 of 7
Print date: 14/02/2017
SECTION 12: ECOLOGICAL INFORMATION.
12.1 Toxicity.
No information is available regarding the ecotoxicity of the substances present.
12.2 Persistence and degradability.
No information is available about persistence and degradability of the product.
12.3 Bioaccumulative potencial.
No information is available regarding the bioaccumulation of the substances present.
12.4 Mobility in soil.
No information is available about the mobility in soil.
The product must not be allowed to go into sewers or waterways.
Prevent penetration into the ground.
12.5 Results of PBT and vPvB assessment.
No information is available about the results of PBT and vPvB assessment of the product.
12.6 Other adverse effects.
No information is available about other adverse effects for the environment.
SECTION 13 DISPOSAL CONSIDERATIONS.
13.1 Waste treatment methods.
Do not dump into sewers or waterways. Waste and empty containers must be handled and eliminated according to current,
local/national legislation.
Follow the provisions of Directive 2008/98/EC regarding waste management.
SECTION 14: TRANSPORT INFORMATION.
Transportation is not dangerous. In case of road accident causing the product’s spillage, proceed in accordance with point 6.
14.1 UN number.
Transportation is not dangerous.
14.2 UN proper shipping name.
Description:
ADR: Transportation is not dangerous.
IMDG: Transportation is not dangerous.
ICAO/IATA: Transportation is not dangerous.
14.3 Transport hazard class(es).
Transportation is not dangerous.
14.4 Packing group.
Transportation is not dangerous.
SAFETY DATA SHEET
(in accordance with Regulation (EU) 2015/830)
95303-G. BESLUX XP-3012
Version: 1
Revision date: 14/02/2017
Page 7 of 7
Print date: 14/02/2017
14.5 Environmental hazards.
Transportation is not dangerous.
14.6 Special precautions for user.
Transportation is not dangerous.
14.7 Transport in bulk according to Annex II of MARPOL and the IBC Code.
Transportation is not dangerous.
SECTION 15: REGULATORY INFORMATION.
15.1 Safety, health and environmental regulations/legislation specific for the mixture.
The product is not affected by the Regulation (EC) No 1005/2009 of the European Parliament and of the Council of 16 September
2009 on substances that deplete the ozone layer.
The product is not affected by Directive 2012/18/EU (SEVESO III).
The product is not affected by Regulation (EU) No 528/2012 concerning the making available on the market and use of biocidal
products.
The product is not affected by the procedure established Regulation (EU) No 649/2012, concerning the export and import of
dangerous chemicals.
15.2 Chemical safety assessment.
There has been no evaluation a chemical safety assessment of the product.
SECTION 16: OTHER INFORMATION.
Complete text of the H phrases that appear in section 3:
H411
Toxic to aquatic life with long lasting effects.
Classification codes:
Aquatic Chronic 2 : Chronic effect to the aquatic environment, category 2
Aquatic Chronic 3 : Chronic effect to the aquatic environment, category 3
It is advisable to carry out basic training with regard to health and safety at work in order to handle this product correctly.
Abbreviations and acronyms used:
DMEL:
Derived Minimal Effect Level, exposure level corresponding to a low risk, that risk should be
considered a tolerable minimum.
DNEL:
Derived No Effect Level, level of exposure to the substance below which adverse effects are not
anticipated.
Key literature references and sources for data:
http://eur-lex.europa.eu/homepage.html
http://echa.europa.eu/
Regulation (EU) 2015/830.
Regulation (EC) No 1907/2006.
Regulation (EU) No 1272/2008.
The information given in this Safety Data Sheet has been drafted in accordance with COMMISSION REGULATION (EU) 2015/830
of 28 May 2015 amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration,
Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive
1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council
Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC.
The information in this Safety Data Sheet on the Preparation is based on current knowledge and on current EC and national
laws, as far as the working conditions of the users is beyond our knowledge and control. The product must not be used for
purposes other than those that are specified without first having written instructions on how to handle. It is always the
responsibility of the user to take the appropriate measures in order to comply with the requirements established by current
legislation. The information contained in this Safety Sheet only states a description of the safety requirements for the
preparation, and it must not be considered as a guarantee of its properties.