TB011309

Technical Bulletin
Model(s)
Year
Touareg
2011-2012
Eng. Code
Trans. Code
VIN Range From
VIN Range To
3.6L
8 Speed
Automatic /
AL1000
All
All
(CGRA)
Condition
01 13 09 March 11, 2013 2027780/2 Supersedes Technical Bulletin V011113 dated October 21, 2011 due to
additional model year applicability.
Update Programming to Eliminate Cold Start - Rough Idle Concern
Note:
DO NOT diagnose or replace components due to cold start rough idle concerns before performing the update
function as explained in this bulletin.
Technical Background
Customers may complain of a rough running condition that occurs during cold start.
DO NOT replace any parts for this condition.
This condition as described does not affect vehicle performance or operation.
Production Solution
Improved software
Service
Update-Programming Procedure:
Tip:
To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603
“Software Version Management”.
The SVM Process must be completed in its entirety so the database receives the update confirmation response. A
warranty claim may not be reimbursed if there is no confirmation response to support the claim.
Page 1 of 4 plus attachment
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Note:
Prior to launching VAS-PC application and starting control module update process, confirm tester screen saver
and power settings in accordance with Special Tools and Equipment - Service Information Circular # VSE-08-18.
Failure to do so may result in the tester entering power save mode during data transfer, and subsequent control
module failure.
When using a VAS 6150/5051B or VAS 5052A tester in conjunction with a VAS 5054A wireless transmitter head
for a flash procedure, please connect a USB cable between the transmitter head and the tester. Failure to do so
may lead to errors during the flash procedure.
• Update the Engine Control Module using the SVM Unit code as listed in the table below:
Model
Engine
2011
Touareg
3.6L
2012
Touareg
(CGRA)
3.6L
(CGRA)
Old Software
Part No.
Old Software
Version
New Software
Part No.
New
Software
Version (or
higher)
03H906023B
8643, 7992,
7584, 6797,
6531
03H906023B
8688
35F4
03H906023AG
2087, 1324,
1000
03H906023AG
2580
36CE
SVM Unit
Code
The procedure can be found in GFF under Functions/ Component Selection, Software Version Management,
Adapting Software.
WARNING:
Radiator Fan(s) may cycle ON high speed during the Update Process! There is a risk that personal injury may
result if contact is made with spinning fan blades.
Keep hands and all objects away from Radiator Fan(s) during Update Process!
Page 2 of 4 plus attachment
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Tip:
The SVM Process must be completed in its entirety so the database receives the update confirmation response. A
warranty claim may not be reimbursed if there is no confirmation response to support the claim or action is carried
out that is not explicitly stated in the Technical Bulletin.
Ensure attached ECM/TCM Tuning Form has been completed and signed by customer as required in SVM
Technical Bulletin Instance 2014603
Warranty
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
1)
Procedures Manual
Model(s)
Year(s)
Eng.
Code(s)
Touareg
2011-2012
3.6L
(CGRA)
Trans.
Code(s)
VIN Range From
VIN Range To
All
All
All
SAGA Coding
Claim Type:
Use applicable Claim Type
Service Number:
1)
Damage
Code
2470
HST
Damage Location (Depends on
Service No.)
--
Use applicable when indicated in
ElsaWeb (L/R)
0039
Parts Manufacturer
Touareg
WWO
Labor Operation : Charge Battery
3)
27068950 = 10 TU
3)
24702599 = 40 TU
Labor Operation : Update Programming
Diagnostic Time
2)
4)
GFF Time expenditure
01500000 = 00 TU max.
NO
Road Test
01210002 01210004
NO
Technical Diagnosis
0132xxxx = 00 TU max.
NO
Page 3 of 4 plus attachment
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Claim Comment: Input “As per Technical Bulletin 2027780” in comment section of Warranty Claim.
1)
Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only
2)
Code per warranty vendor code policy.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policy Procedures Manual.
Required Parts and Tools
No Special Parts required.
Tool Description
Tool No:
Midtronics Battery Tester/Charger
InCharge 940 (INC-940)
VAS Diagnostic Tool
VAS-PC, 5051B, 5052A, 6150X
(Base CD V19.01.00 and Brand DVD V19.19.00 or
higher)
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.
Page 4 of 4 plus attachment
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
OWNER INFORMATION ABOUT CONTROL MODULE TUNING*
ACKNOWLEDGEMENT AND AUTHORIZATION FOR
REPROGRAMMING (REFLASHING) OF CONTROL MODULE(S)
*) “TUNING” is described as the addition of or modification of any component which causes a
Volkswagen vehicle to perform outside the normal parameters and specifications approved by
Volkswagen Group of America / Volkswagen Group Canada.
Date:
Dealer Number:
Vehicle Identification Number:
Repair Order Number:
Dealer stamp
I
, owner or driver of the above identified Volkswagen, confirm:
- “Tuning” as described above (especially power increasing modifications) has NOT been
performed on my vehicle.
- “Tuning” as described above has been performed on my vehicle and the following components
were modified or installed:
TUNING was performed by (Please provide Company name and telephone number, if you wish us
to contact them):
I understand that if my Control Module is determined to have been tuned, any damage caused by
the tuning of the Control Module (including adverse emissions consequences) will not be covered
by VWGoA / VGC warranties.
I am permitting an authorized Volkswagen Dealer to reflash (update) my Control Module, and by
doing so, I understand that this process will automatically overwrite (destroy) and permanently
delete any tuning program that was previously installed on the Control Module of my Volkswagen
vehicle.
By signing below, I fully acknowledge and understand that the tuning program will not be restored
and VWGoA / VGC, will not be liable in any way for the loss of tuning data.
Signature of Customer
E 2013 Volkswagen Group of America Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printi ng and is subject to the copyright and other intellectual
property rights of VGoA / VGCA Inc., its affiliated companies and its licensors. All rights are reserved to ma ke changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitte d in any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or rep osted to other sites, without the prior expressed written permission of the publisher .