TSB-23-51-002

Service Bulletin Details

Public Details for: TSB-23-51-002
This technical service bulletin provides service manual corrections to the troubleshooting procedures/ corrections for the door mirror system.
- 2023 - 2022 -
Models from 2023
2023 MITSUBISHI OUTLANDER
Models from 2022
2022 MITSUBISHI OUTLANDER
SUBJECT:
TROUBLESHOOTING PROCEDURES/
CORRECTIONS FOR DOOR MIRROR SYSTEM –
SERVICE MANUAL REVISION
No:
TSB-23-51-002
DATE:
August 2023
MODEL:
Outlander
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ X ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
This TSB provides updated troubleshooting procedures related to the Door Mirror System which
includes:
•
•
•
•
Power Window Main Switch
Door Mirror
Mirror Motor
Retractor Motor
Additionally, this TSB provides corrections to the Terminal Voltage table for the Passenger
Door Mirror Control Module and Circuit Diagrams.
AFFECTED VEHICLES
2022 - 2023 Outlander
AFFECTED SERVICE MANUAL
• 2022 - 2023 Outlander Service Manual
PROCEDURE
Please use the following chart as a guide to replace the indicated pages in the affected
Service Manuals, Groups 51 and 90.
Copyright 2023, Mitsubishi Motors North America, Inc.
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi
Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
8/17/2023
1 of 49
(5349/MSB23M5190001)
Attached sheet 1 (1/3)
OUTLANDER
Applicable Manual
2022
OUTLANDER
Service Manual
8/17/2023
Pub. No.
MSCD-030B-2022
(Volume 4)
Applicable Title
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Component Parts Location
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Power Window Main Switch
(Without automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Power Window Main Switch
(With automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Door Mirror
(Without automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Door Mirror
(With automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ SYSTEM
└ DOOR MIRROR SYSTEM
└ System Description
(Without automatic positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ SYSTEM
└ DOOR MIRROR SYSTEM
└ System Description
(With automatic positioner system)
DRIVER CONTROLS
└ MIRRORS
└ ECU DIAGNOSIS INFORMATION
└ PASSENGER DOOR MIRROR CONTROL MODULE
└ Reference Value
DRIVER CONTROLS
└ MIRRORS
└ DTC/CIRCUIT DIAGNOSIS
└ POWER WINDOW MAIN SWITCH
└ Diagnosis Procedure
(Without automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ DTC/CIRCUIT DIAGNOSIS
└ POWER WINDOW MAIN SWITCH
└ Diagnosis Procedure
(With automatic drive positioner system)
2 of 49
Contents
Attached
sheet 2
Attached
sheet 3
Attached
sheet 4
Attached
sheet 5
Attached
sheet 6
Attached
sheet 7
Attached
sheet 8
(5349/MSB23M5190001)
Attached sheet 1 (2/3)
OUTLANDER
Applicable Manual
2022
OUTLANDER
Service Manual
Pub. No.
MSCD-030B-2022
(Volume 4)
MSCD-030B-2022
(Volume 5)
2023
OUTLANDER
Service Manual
8/17/2023
MSCD-030B-2023
Applicable Title
DRIVER CONTROLS
└ MIRRORS
└ SYMPTOM DIAGNOSIS
└ DOOR MIRROR DOES NOT OPERATE
└ Diagnosis Procedure
(Without automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYMPTOM DIAGNOSIS
└ DOOR MIRROR DOES NOT OPERATE
└ Diagnosis Procedure
(With automatic drive positioner system)
CIRCUIT DIAGRAMS
└ CIRCUIT DIAGRAMS
└ DRIVER CONTROLS
└ MIRRORS
└ DOOR MIRROR
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Component Parts Location
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Power Window Main Switch
(Without automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Power Window Main Switch
(With automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Door Mirror
(Without automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ COMPONENT PARTS
└ Door Mirror
(With automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ SYSTEM
└ DOOR MIRROR SYSTEM
└ System Description
(Without automatic positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYSTEM DESCRIPTION
└ SYSTEM
└ DOOR MIRROR SYSTEM
└ System Description
(With automatic positioner system)
3 of 49
Contents
Attached
sheet 9
Attached
sheet 10
Attached
sheet 18
Attached
sheet 2
Attached
sheet 3
Attached
sheet 4
Attached
sheet 5
Attached
sheet 6
(5349/MSB23M5190001)
Attached sheet 1 (3/3)
OUTLANDER
Applicable Manual
2023
OUTLANDER
Service Manual
Pub. No.
MSCD-030B-2023
Applicable Title
DRIVER CONTROLS
└ MIRRORS
└ ECU DIAGNOSIS INFORMATION
└ PASSENGER DOOR MIRROR CONTROL MODULE
└ Reference Value
DRIVER CONTROLS
└ MIRRORS
└ DTC/CIRCUIT DIAGNOSIS
└ POWER WINDOW MAIN SWITCH
└ Diagnosis Procedure
(Without automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ DTC/CIRCUIT DIAGNOSIS
└ POWER WINDOW MAIN SWITCH
└ Diagnosis Procedure
(With automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYMPTOM DIAGNOSIS
└ DOOR MIRROR DOES NOT OPERATE
└ Diagnosis Procedure
(Without automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ SYMPTOM DIAGNOSIS
└ DOOR MIRROR DOES NOT OPERATE
└ Diagnosis Procedure
(With automatic drive positioner system)
DRIVER CONTROLS
└ MIRRORS
└ DTC/CIRCUIT DIAGNOSIS
└ MIRROR MOTOR
└ Diagnosis Procedure
DRIVER CONTROLS
└ MIRRORS
└ DTC/CIRCUIT DIAGNOSIS
└ RETRACTOR MOTOR
└ Diagnosis Procedure
CIRCUIT DIAGRAMS
└ CIRCUIT DIAGRAMS
└ DRIVER CONTROLS
└ MIRRORS
└ DOOR MIRROR
8/17/2023
4 of 49
Contents
Attached
sheet 7
Attached
sheet 8
Attached
sheet 9
Attached
sheet 10
Attached
sheet 11
Attached
sheet 18
(5349/MSB23M5190001)
Attached sheet 2
5
MIRRORS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
DF100BTQAA00USA
Driver seat control unit* 1
Door mirror RH
BCM
Passenger door mirror control module*
2

Refer to Component Parts LocationCVT CONTROL
SYSTEM.
Power window main switch
Door mirror LH
Refer to BODY CONTROL SYSTEM.

TCM* 1
Refer to COMPONENT PARTS.

View with front door finisher (passenger side) removed
8/17/2023
5 of 49
(5349/MSB23M5190001)
Attached sheet 3

*1

MIRRORS
6
*: With automatic drive positioner system
*2 : With
memory function(door mirror)


Power Window Main Switch (Without automatic drive positioner system)
COMPONENT FUNCTION WITHIN SYSTEM
Power window main switch transmits mirror switch signal, changeover switch signal and door mirror power supply to door mirror.


CF100BTRAA00USA
INDIVIDUAL COMPONENT FUNCTION
•
Power window main switch transmits the mirror motor power supply to door mirror.
•
Power window main switch receives the mirror position signal from door mirror.
COMPONENT OPERATION
•
Mirror face angle adjustment is performed when mirror switch is operated.
•
The door mirror for which angle adjustment is performed is switch by operating the changeover switch.
CF100BTSAA00USA
COMPONENT PARTS LOCATION
Power window main switch is installed to front door finisher. Refer to COMPONENT PARTS.
Power Window Main Switch (With automatic drive positioner system)
COMPONENT FUNCTION WITHIN SYSTEM

Power window main switch transmits mirror switch signal, changeover switch signal and door mirror power supply to door mirror LH.


CF100BTRAA00USA
8/17/2023
6 of 49
(5349/MSB23M5190001)
Attached sheet 4
7
MIRRORS
INDIVIDUAL COMPONENT FUNCTION
•
Power window main switch transmits the mirror motor power supply to door mirror LH.
•
Power window main switch receives the mirror position signal from door mirror LH.
COMPONENT OPERATION
•
Mirror face angle adjustment is performed when mirror switch is operated.
•
The door mirror for which angle adjustment is performed is switch by operating the changeover switch.
CF100BTSAA00USA
COMPONENT PARTS LOCATION
Power window main switch is installed to front door finisher. Refer to COMPONENT PARTS.

Door Mirror (Without automatic drive positioner system)


COMPONENT FUNCTION WITHIN SYSTEM
It makes mirror face operate from side to side and up and down with the electric power that power window main switch supplies.
INDIVIDUAL COMPONENT FUNCTION
It makes mirror face operate from side to side and up and down via integrated motor.
CF100BTTAA00USA
COMPONENT OPERATION
CF100BTSAA00USA
COMPONENT PARTS LOCATION
Door mirror is installed in front door panel. For detailed installation location. Refer to COMPONENT PARTS.
8/17/2023
7 of 49
(5349/MSB23M5190001)
Attached sheet 5
MIRRORS
8

Door Mirror (With automatic drive positioner system)


COMPONENT FUNCTION WITHIN SYSTEM
It makes mirror face operate from side to side and up and down with the electric power that power window main switch and passenger door mirror control module supplies.
INDIVIDUAL COMPONENT FUNCTION
It makes mirror face operate from side to side and up and down via integrated motor.
CF100BTTAA00USA
COMPONENT OPERATION
CF100BTUAA00USA
COMPONENT PARTS LOCATION
Door mirror is installed in front door panel. For detailed installation location. Refer to COMPONENT PARTS.
Passenger Door Mirror Control Module
COMPONENT FUNCTION WITHIN SYSTEM
Passenger door mirror control module supplies mirror motor power supply in door mirror RH and operates door mirror RH.
CF100BTVAA00USA
INDIVIDUAL COMPONENT FUNCTION
•
Passenger door mirror control module transmits the mirror motor power supply to door mirror RH.
•
Passenger door mirror control module receives the mirror position signal from door mirror RH.
8/17/2023
8 of 49
(5349/MSB23M5190001)
Attached sheet 6
MIRRORS
10
SYSTEM
DOOR MIRROR SYSTEM
System Description (Without automatic positioner system)


SYSTEM DIAGRAM
Component

Function
Power window main switch
Refer to Power Window Main SwitchCOMPONENT PARTS.
Door mirror
Refer to Door MirrorCOMPONENT PARTS.

System Description (With automatic positioner system)


SYSTEM DIAGRAM
CF100BTXAA00USA
Component
Function
BCM
BCM transmits the mirror control signal and mirror position signal to power window main switch and
passenger door mirror control module via LIN communication.
TCM
TCM transmits the shift position signal to BCM via CAN communication.
Driver seat control unit
Driver seat control unit transmits the mirror control signal to BCM via CAN communication.
Power window main switch
Refer to Power Window Main SwitchCOMPONENT PARTS.
Passenger door mirror control module
Refer to COMPONENT PARTS.
Door mirror
Refer to Door MirrorCOMPONENT PARTS.
8/17/2023
9 of 49
(5349/MSB23M5190001)
Attached sheet 7 (1/2)
MIRRORS
13
ECU DIAGNOSIS INFORMATION
PASSENGER DOOR MIRROR CONTROL MODULE
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES

(Wire color)
CF100BTYAA00USA
Terminal
Description
(?)
1
(BR)
2
(BG)
3
(V)
4
(LA/G)
5
(W)
6
(R)
7
(L)
(í)
Signal name
Input/Ou
tput
Ground
Door mirror sensor
(passenger side)
left/right signal
Input
Ground
Door mirror sensor
(passenger side)
up/down signal
Input
Ground
Door mirror motor
(passenger side) up
output signal
Output
Ground
Battery power supply
Input
Ground
Ground (sensor)
Ground
Down mirror motor
sensor power supply
Ground
Reference value
(+)
?Wire color?
LIN communication
(door mirror)
Condition
(Approx.)

Door mirror RH position

(GR)
Door mirror RH position

(BR)
Other than above
Door mirror RH
Change between 6 V (close to left edge) - 0V
(close to right edge)
Change between 6 V (close to left edge) - 0V
(close to right edge)
0-1V
Operate (up)
(L)

9 - 16 V
—
9 - 16 V
—
—
0-1V
Input
—
4-6V
Input/Out
put
(V)
15
10
5
0
Ignition switch ON
20ms
CF100BEIAA00USA
10
(P)
11
(Y)
12
(B)
Ground
Door mirror motor
(passenger side)
down/right output
signal
Output
Door mirror RH
Ground
Door mirror motor
(passenger side) left
output signal
Output
Door mirror RH
Ground
Ground
—
(G)

Other than above
0-1V
Operate (down/right)
9 - 16 V
Other than above
0-1V
Operate (left)
9 - 16 V
—
0-1V
Attached sheet 7 (2/2)

8/17/2023
10 of 49
(5349/MSB23M5190001)
Attached sheet 7 (2/2)
8
(G)
Door mirror motor
Ground (passenger side)
open output signal
Output
Door mirror RH
9
(BE)
Door mirror motor
Ground (passenger side)
close output signal
Output
Door mirror RH
8/17/2023
11 of 49
Operate (open)
9 – 16 V
Operate (close)
0–1V
Operate (open)
0–1V
Operate (close)
9 – 16 V
(5349/MSB23M5190001)
Attached sheet 8 (1/6)
MIRRORS
16
3. REPLACE PASSENGER DOOR MIRROR CONTROL MODULE
Replace passenger door mirror control module. Refer to PASSENGER DOOR MIRROR CONTROL MODULE.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 4
.
4. REPLACE BCM
Replace BCM. Refer to BCM.
>>
INSPECTION END
POWER WINDOW MAIN SWITCH
Diagnosis Procedure (Without automatic drive positioner system)
1. CHECK POWER WINDOW MAIN SWITCH CIRCUIT
1. Ignition switch OFF.
2. Disconnect power window main switch connector and door mirror connector.
3. Check continuity between power window main switch harness connector and door mirror harness connector.
Power window main switch
Connector
Door mirror
Terminal
Connector
Terminal
6
11
21
D27
Continuity
Door mirror LH
D14
5
10
4
8
11
7
Door mirror RH
D107
9
Existed
5
4
4. Check continuity between power window main switch harness connector and ground.
Power window main switch
Connector
Terminal
—
Continuity
Ground
Not existed
6
21
D27
10
8
7
9
Is the inspection result normal?
YES >>
GO TO 2
.
NO >>
Repair or replace harness.

Attached sheet 8 (2/6) to (4/6)

8/17/2023
12 of 49
(5349/MSB23M5190001)
Attached sheet 8 (2/6)
Diagnosis Procedure
Diagnosis Procedure
1. CHECK CONFIGURATION INFORMATION
With M.U.T.-III SE
1. Ignition switch ON.
2. Using the M.U.T.-III SE, select “Special Function” of “BCM”.
3. Check “Passenger door mirror control module” of “Configuration Information”.
Is the check result “Not present”?
YES >>
GO TO 2.
NO >>
GO TO 4.
2. CHECK POWER WINDOW MAIN SWITCH CIRCUIT
1. Ignition switch OFF.
2. Disconnect power window main switch connector and door mirror connector.
3. Check continuity between power window main switch harness connector and door mirror harness connector.
Power window main switch
Connector
Door mirror
Terminal
Connector
Terminal
6
6
21
14
10
D27
Continuity
Door mirror LH
D14
13
18
3
17
11
8
6
7
14
9
Door mirror RH
D107
Existed
13
19
3
20
11
4. Check continuity between power window main switch harness connector and ground.
Power window main switch
Connector
Terminal
—
Continuity
Ground
Not existed
6
21
10
18
D27
17
8
7
9
19
20
Is the inspection result normal?
YES >>
GO TO 3.
NO >>
Repair or replace harness.
8/17/2023
13 of 49
(5349/MSB23M5190001)
Attached sheet 8 (3/6)
3. REPLACE DOOR MIRROR
Replace door mirror . Refer to DOOR MIRROR ASSEMBLY.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 6.
4. CHECK POWER WINDOW MAIN SWITCH CIRCUIT
1. Ignition switch OFF.
2. Disconnect power window main switch connector and door mirror LH connector.
3. Check continuity between power window main switch harness connector and door mirror LH harness connector.
Power window main switch
Connector
Door mirror LH
Terminal
Connector
Terminal
2
9
6
6
7
D6
Continuity
10
8
D16
2
10
13
14
1
21
14
Existed
4. Check continuity between power window main switch harness connector and ground.
Power window main switch
Connector
Terminal
—
Continuity
Ground
Not existed
2
6
7
D6
8
10
14
21
Is the inspection result normal?
YES >>
GO TO 5.
NO >>
Repair or replace harness.
8/17/2023
14 of 49
(5349/MSB23M5190001)
Attached sheet 8 (4/6)
5. REPLACE DOOR MIRROR LH
Replace door mirror LH. Refer to DOOR MIRROR ASSEMBLY.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 6.
6. REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch. Refer to POWER WINDOW MAIN SWITCH.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 7.
7. REPLACE BCM
Replace BCM. Refer to BCM.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 8.
8. CHECK INTERMITTENT INCIDENT
Check intermittent incident. Refer to Intermittent IncidentSERVICE INFORMATION FOR ELECTRICAL INCIDENT.
>>
INSPECTION END
8/17/2023
15 of 49
(5349/MSB23M5190001)
Attached sheet 8 (5/6)
17
MIRRORS

2. REPLACE DOOR MIRROR
Replace door mirror . Refer to DOOR MIRROR ASSEMBLY.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 3
.
3. REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch. Refer to POWER WINDOW MAIN SWITCH.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 4
.
4. REPLACE BCM
Replace BCM. Refer to BCM.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 5
.
5. CHECK INTERMITTENT INCIDENT
Check intermittent incident. Refer to Intermittent IncidentSERVICE INFORMATION FOR ELECTRICAL INCIDENT.
>>
INSPECTION END
Diagnosis Procedure (With automatic drive positioner system)
1. CHECK POWER WINDOW MAIN SWITCH CIRCUIT
1. Ignition switch OFF.
2. Disconnect power window main switch connector and door mirror LH connector.
3. Check continuity between power window main switch harness connector and door mirror LH harness connector.
Power window main switch
Door mirror LH
Continuity
Connector
Terminal
Connector
2
6
6
10
7
D6
Terminal
8
5
D16
13
10
3
14
14
21
2
Existed

8/17/2023
16 of 49
(5349/MSB23M5190001)
Attached sheet 8 (6/6)
0,55256

4. Check continuity between power window main switch harness connector and ground.
3RZHUZLQGRZPDLQVZLWFK
&RQQHFWRU
²
&RQWLQXLW\
Ground
Not existed
7HUPLQDO
2
6
7
D6
8
10
14
21
Is the inspection result normal?
YES >>
GO TO 2
.
NO >>
Repair or replace harness.
 5(3/$&('2250,5525/+
Replace door mirror LH. Refer to DOOR MIRROR ASSEMBLY.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 3
.
 5(3/$&(32:(5:,1'2:0$,16:,7&+
Replace power window main switch. Refer to POWER WINDOW MAIN SWITCH.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 4
.
 5(3/$&(%&0
Replace BCM. Refer to BCM.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 5
.
 &+(&.,17(50,77(17,1&,'(17
Check intermittent incident. Refer to Intermittent IncidentSERVICE INFORMATION FOR ELECTRICAL INCIDENT.
>>
INSPECTION END

8/17/2023
17 of 49
(5349/MSB23M5190001)
Attached sheet 9 (1/3)
MIRRORS
22
8. REPLACE BCM
Replace BCM. Refer to BCM.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 9
.
9. CHECK INTERMITTENT INCIDENT
Check intermittent incident. Refer to Intermittent IncidentSERVICE INFORMATION FOR ELECTRICAL INCIDENT.
>>
INSPECTION END
SYMPTOM DIAGNOSIS

DOOR MIRROR DOES NOT OPERATE
Diagnosis Procedure (Without automatic drive positioner system)
 1. CHECK DOOR MIRROR CIRCUIT
Check door mirror. Refer to Diagnosis ProcedurePOWER WINDOW MAIN SWITCH.
1-1 Is the inspection result normal?
 YES >>
Attached sheet 9 (2/3)

GO TO 2
.
NO >>
Repair or replace the malfunctioning parts.
2. REPLACE DOOR MIRROR MOTOR
Replace door mirror motor. Refer to DOOR MIRROR ASSEMBLY.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 3
.
3. REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch. Refer to POWER WINDOW MAIN SWITCH.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Check Intermittent incident. Refer to Intermittent IncidentSERVICE INFORMATION FOR ELECTRICAL INCIDENT.
Attached sheet 9 (3/3)

8/17/2023
18 of 49
(5349/MSB23M5190001)
Attached sheet 9 (2/3)
1. CHECK CONFIGURATION INFORMATION
With M.U.T.-III SE
1. Ignition switch ON.
2. Using the M.U.T.-III SE, select “Special Function” of “BCM”.
3. Check “Passenger door mirror control module” of “Configuration Information”.
Is the check result “Not present”?
YES >>
GO TO 1-1.
NO >>
GO TO 4.
8/17/2023
19 of 49
(5349/MSB23M5190001)
Attached sheet 9 (3/3)
4. CHECK AUTOMATIC DRIVE POSITIONER SYSTEM
Check door mirror operate with automatic drive positioner system. Refer to MANUAL FUNCTION.
Is the inspection result normal?
YES >>
GO TO 5.
NO >>
Check automatic drive positioner system operation. Refer to Diagnosis ProcedurePOWER SUPPLY AND GROUND CIRCUIT (DRIVER SEAT CONTROL UNIT).
5. CHECK DOOR MIRROR CIRCUIT
Check door circuit.
•
Door mirror LH: Refer to Diagnosis ProcedurePOWER WINDOW MAIN SWITCH.
•
Door mirror RH: Refer to PASSENGER DOOR MIRROR CONTROL MODULE.
Is the inspection result normal?
YES >>
Check Intermittent incident. Refer to Intermittent IncidentSERVICE INFORMATION FOR ELECTRICAL INCIDENT.
NO >>
Repair or replace the malfunctioning parts.
8/17/2023
20 of 49
(5349/MSB23M5190001)
Attached sheet 10
23
MIRRORS
Diagnosis Procedure (With automatic drive positioner system)
1. CHECK AUTOMATIC DRIVE POSITIONER SYSTEM
Check door mirror operate with automatic drive positioner system. Refer to MANUAL FUNCTION.
Is the inspection result normal?
YES >>
GO TO 2
.
NO >>
Check automatic drive positioner system operation. Refer to Diagnosis ProcedurePOWER SUPPLY AND GROUND CIRCUIT (DRIVER SEAT CONTROL UNIT).
2. CHECK DOOR MIRROR CIRCUIT
Check door circuit.
•
Door mirror LH: Refer to Diagnosis ProcedurePOWER WINDOW MAIN SWITCH.
•
Door mirror RH: Refer to PASSENGER DOOR MIRROR CONTROL MODULE.
Is the inspection result normal?
YES >>
Check Intermittent incident. Refer to Intermittent IncidentSERVICE INFORMATION FOR ELECTRICAL INCIDENT.
NO >>
Repair or replace the malfunctioning parts.

REVERSE INTERLOCK DOOR MIRROR DOES NOT OPERATE
Diagnosis Procedure
1. CHECK DTC
Check DTC for TCM. Refer to TCM.
Is the inspection result normal?
YES >>
GO TO 2
.
NO >>
Repair replace the malfunctioning parts.
2. CHECK DTC
Check DTC for BCM. Refer to DTC IndexBCM.
Is the inspection result normal?
YES >>
GO TO 3
.
NO >>
Repair replace the malfunctioning parts.
3. CHECK DOOR MIRROR
1. Check operation of door mirror LH and door mirror RH.
2. Repair replace the malfunctioning parts.
•
Power window main switch in case of door mirror LH: Refer to POWER WINDOW MAIN SWITCH.
•
Passenger door mirror control module in case of door mirror RH: Refer to PASSENGER DOOR MIRROR CONTROL MODULE.
>>
INSPECTION END
8/17/2023
21 of 49
(5349/MSB23M5190001)
Attached sheet 11 (1/16)
23
MIRRORS
Diagnosis Procedure
Diagnosis Procedure
1. CHECK FUSE
1. Ignition switch OFF.
2. Check that the following fuse is not blown (open).
Fuse No.
Capacity
45
5A
Is the inspection result normal?
YES >>
GO TO 2.
NO >>
Replace the blown (open) fuse after repairing the cause of blown (open).
2. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) POWER SUPPLY CIRCUIT
1. Disconnect power window main switch (mirror control switch) connector.
2. Ignition switch ON.
3. Check voltage between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D27
3
-
Voltage
Ground
9 – 16 V
Is the inspection result normal?
YES >>
GO TO 3.
NO >>
Repair or replace harness.
3. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) GROUND CIRCUIT
1. Ignition switch OFF.
2. Check continuity between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D27
22
-
Continuity
Ground
Existed
Is the inspection result normal?
YES >>
GO TO 4.
NO >>
Repair or replace harness.

Attached sheet 11 (2 /16) to (6/16)

8/17/2023
22 of 49
(5349/MSB23M5190001)
Attached sheet 11 (2/16)
Diagnosis Procedure
Diagnosis Procedure
1. CHECK FUSE
1. Ignition switch OFF.
2. Check that the following fuse is not blown (open).
Fuse No.
Capacity
45
5A
Is the inspection result normal?
YES >>
GO TO 2.
NO >>
Replace the blown (open) fuse after repairing the cause of blown (open).
2. CHECK CONFIGURATION INFORMATION
With M.U.T.-III SE
1. Ignition switch ON.
2. Using the M.U.T.-III SE, select “Special Function” of “BCM”.
3. Check “Passenger door mirror control module” of “Configuration Information”.
Is the check result “Not present”?
YES >>
GO TO 3.
NO >>
GO TO 7.
3. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) POWER SUPPLY CIRCUIT
1. Disconnect power window main switch (mirror control switch) connector.
2. Ignition switch ON.
3. Check voltage between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D27
3
-
Voltage
Ground
9 – 16 V
Is the inspection result normal?
YES >>
GO TO 4.
NO >>
Repair or replace harness.
8/17/2023
23 of 49
(5349/MSB23M5190001)
Attached sheet 11 (3/16)
4. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) GROUND CIRCUIT
1. Ignition switch OFF.
2. Check continuity between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D27
22
-
Continuity
Ground
Existed
Is the inspection result normal?
YES >>
GO TO 5.
NO >>
Repair or replace harness.
5. CHECK MIRROR MOTOR CIRCUIT
1. Disconnect door mirror assembly (LH) and (RH) connector.
2. Check continuity between door mirror assembly (LH) and (RH) connector and power window main switch (mirror control switch) connector.
Door mirror assembly
Connector
LH
Power window main switch
Terminal
D14
6
13
10
6
D107
Terminal
6
14
RH
Connector
21
D27
8
13
9
14
7
Continuity
Existed
Is the inspection result normal?
YES >>
GO TO 6.
NO >>
Repair or replace harnesses.
8/17/2023
24 of 49
(5349/MSB23M5190001)
Attached sheet 11 (4/16)
6. CHECK MIRROR MOTOR INPUT SIGNAL
1. Connect power window main switch (mirror control switch) connector.
2. Ignition switch ON.
3. With operating the mirror switch, check the voltage between door mirror assembly harness connector and ground.
+
Condition
Door mirror assembly
Connector
Terminal
Right/left changeover
switch
Operated to DOWN or
RIGHT
14
LH
D14
Right
13
6
Ground
14
RH
D107
Mirror switch
Left
13
6
Voltage
9 - 16 V
Other than above
0-1V
Operated to LEFT
9 - 16 V
Other than above
0-1V
Operated to UP
9 - 16 V
Other than above
0-1V
Operated to DOWN or
RIGHT
9 - 16 V
Other than above
0-1V
Operated to LEFT
9 - 16 V
Other than above
0-1V
Operated to UP
9 - 16 V
Other than above
0-1V
Is the inspection result normal?
YES >>
GO TO 11.
NO >>
Replace door mirror assembly.
7. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) AND PASSENGER DOOR MIRROR CONTROL
MODULE POWER SUPPLY CIRCUIT
1. Disconnect power window main switch (mirror control switch) connector and passenger door mirror control module connector.
2. Ignition switch ON.
3. Check voltage between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D6
3
-
Voltage
Ground
9 – 16 V
4. Check voltage between passenger door mirror control module harness connector and ground.
+
Passenger door mirror control module
Connector
Terminal
D108
4
-
Voltage
Ground
9 – 16 V
Is the inspection result normal?
YES >>
GO TO 8.
NO >>
Repair or replace harness.
8/17/2023
25 of 49
(5349/MSB23M5190001)
Attached sheet 11 (5/16)
8. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) AND PASSENGER DOOR MIRROR CONTROL
MODULE GROUND CIRCUIT
1. Ignition switch OFF.
2. Check continuity between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D6
22
-
Continuity
Ground
Existed
3. Check continuity between passenger door mirror control module harness connector and ground.
+
Passenger door mirror control module
Connector
Terminal
D108
12
-
Continuity
Ground
Existed
Is the inspection result normal?
YES >>
GO TO 9.
NO >>
Repair or replace harness.
9. CHECK MIRROR MOTOR CIRCUIT
1. Disconnect door mirror assembly (LH) and (RH) connector.
2. Check continuity between door mirror assembly (LH) connector and power window main switch connector.
Door mirror assembly
Connector
Power window main switch
Terminal
Connector
Terminal
D6
10
6
LH
D16
13
Continuity
6
14
Existed
21
3. Check continuity between door mirror assembly (RH) connector and passenger door mirror control module connector.
Passenger door mirror control
module
Door mirror assembly
Connector
Terminal
Connector
Terminal
D108
11
6
RH
D106
13
Continuity
3
14
Existed
10
Is the inspection result normal?
YES >>
GO TO 10.
NO >>
Repair or replace harnesses.
8/17/2023
26 of 49
(5349/MSB23M5190001)
Attached sheet 11 (6/16)
10. CHECK MIRROR MOTOR INPUT SIGNAL
1. Connect power window main switch (mirror control switch) connector and passenger door mirror control module connector.
2. Ignition switch ON.
3. With operating the mirror switch, check the voltage between door mirror assembly harness connector and ground.
+
Condition
Door mirror assembly
Connector
Terminal
Right/left changeover
switch
Operated to DOWN or
RIGHT
14
LH
D16
Right
13
6
Ground
14
RH
D106
Mirror switch
Left
13
6
Voltage
9 - 16 V
Other than above
0-1V
Operated to LEFT
9 - 16 V
Other than above
0-1V
Operated to UP
9 - 16 V
Other than above
0-1V
Operated to DOWN or
RIGHT
9 - 16 V
Other than above
0-1V
Operated to LEFT
9 - 16 V
Other than above
0-1V
Operated to UP
9 - 16 V
Other than above
0-1V
Is the inspection result normal?
YES >>
GO TO 11.
NO >>
Replace door mirror assembly.
11. REPLACE POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH)
Replace power window main switch (mirror control switch).
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Refer to GENERAL INFORMATION - BASIC INSPECTION - SERVICE INFORMATION FOR ELECTRICAL INCIDENT - Intermittent Incident Intermittent Incident.
8/17/2023
27 of 49
(5349/MSB23M5190001)
Attached sheet 11 (7/16)
MIRRORS
24
4. CHECK MIRROR MOTOR CIRCUIT
1. Disconnect door mirror assembly (LH) and (RH) connector.
2. Check continuity between door mirror assembly (LH) and (RH) connector and power window main switch (mirror control switch) connector.
Door mirror assembly
Power window main switch
Continuity
Connector
LH
Terminal
D14
Connector
6
6
13
10
14
D27
6
RH
D106
Terminal
21
Existed
8
13
9
14
7
Is the inspection result normal?
YES >>
GO TO 5
.
NO >>
Repair or replace harnesses.
5. CHECK MIRROR MOTOR INPUT SIGNAL
1. Connect power window main switch (mirror control switch) connector.
2. Ignition switch ON.
3. With operating the mirror switch, check the voltage between door mirror assembly harness connector and ground.
+
Condition
Door mirror assembly
Connector
Terminal
Right/left changeover
switch
14
LH
D14
Right
13
6
Ground
14
RH
D106
Left
13
6
Voltage
Mirror switch
Operated to DOWN or
RIGHT
9 - 16 V
Other than above
0-1V
Operated to LEFT
9 - 16 V
Other than above
0-1V
Operated to UP
9 - 16 V
Other than above
0-1V
Operated to DOWN or
RIGHT
9 - 16 V
Other than above
0-1V
Operated to LEFT
9 - 16 V
Other than above
0-1V
Operated to UP
9 - 16 V
Other than above
0-1V
Is the inspection result normal?
YES >>
GO TO 6.
NO >>
Replace door mirror assembly.

8/17/2023
28 of 49
(5349/MSB23M5190001)
Attached sheet 11 (8/16
25
MIRRORS
6. REPLACE POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH)
Replace power window main switch (mirror control switch).
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Refer to GENERAL INFORMATION - BASIC INSPECTION - SERVICE INFORMATION FOR ELECTRICAL INCIDENT - Intermittent Incident Intermittent Incident.

RETRACTOR MOTOR
Component Function Check
Component Function Check
1. CHECK RETRACTABLE DOOR MIRROR OPERATION
1. Ignition switch ON.
2. When the mirror folding/unfolding switch is operated to open or close, check whether the retracting function of the door mirror operates normally.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Refer to Diagnosis Procedure Diagnosis Procedure.
Diagnosis Procedure
Diagnosis Procedure
1. CHECK FUSE
1. Ignition switch OFF.
2. Check that the following fuse is not blown (open).
Fuse No.
Capacity
45
5A
Is the inspection result normal?
YES >>
GO TO 2.
NO >>
Replace the blown (open) fuse after repairing the cause of blown (open).

Attached sheet 11 (9/16) to (13/16)

8/17/2023
29 of 49
(5349/MSB23M5190001)
Attached sheet 11 (9/16)
Diagnosis Procedure
Diagnosis Procedure
1. CHECK FUSE
1. Ignition switch OFF.
2. Check that the following fuse is not blown (open).
Fuse No.
Capacity
45
5A
Is the inspection result normal?
YES >>
GO TO 2.
NO >>
Replace the blown (open) fuse after repairing the cause of blown (open).
2. CHECK CONFIGURATION INFORMATION
With M.U.T.-III SE
1. Ignition switch ON.
2. Using the M.U.T.-III SE, select “Special Function” of “BCM”.
3. Check “Passenger door mirror control module” of “Configuration Information”.
Is the check result “Not present”?
YES >>
GO TO 3..
NO >>
GO TO 7..
3. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) POWER SUPPLY CIRCUIT
1. Disconnect power window main switch (mirror control switch) connector.
2. Ignition switch ON.
3. Check voltage between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D27
3
-
Voltage
Ground
9 – 16 V
Is the inspection result normal?
YES >>
GO TO 4.
NO >>
Repair or replace harness.
8/17/2023
30 of 49
(5349/MSB23M5190001)
Attached sheet 11 (10/16)
4. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) GROUND CIRCUIT
1. Ignition switch OFF.
2. Check continuity between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D27
22
-
Continuity
Ground
Existed
Is the inspection result normal?
YES >>
GO TO 5.
NO >>
Repair or replace harness.
5. CHECK RETRACTOR MOTOR INPUT SIGNAL 1
1. Disconnect door mirror assembly (LH) and (RH) connector.
2. Check continuity between door mirror assembly (LH) and (RH) connector and power window main switch connector.
Door mirror assembly
Connector
LH
Terminal
D14
RH
Power window main switch
D107
Connector
Terminal
3
11
3
Continuity
18
17
D27
19
11
Existed
20
3. Check continuity between door mirror assembly (LH) and (RH) connector and ground.
Door mirror assembly
Connector
LH
RH
Terminal
D14
D107
-
Continuity
Ground
Not existed
3
11
3
11
Is the inspection result normal?
YES >>
GO TO 6..
NO >>
Repair or replace harnesses.
8/17/2023
31 of 49
(5349/MSB23M5190001)
Attached sheet 11 (11/16)
6. CHECK RETRACTOR MOTOR INPUT SIGNAL 2
1. Connect power window main switch (mirror control switch) connector.
2. Ignition switch ON.
3. With operating the mirror folding/unfolding switch, check the voltage between door mirror assembly harness connector and ground.
+
Door mirror assembly
Connector
-
Condition
11
LH
D14
3
Ground
Mirror folding/unfolding
switch
11
RH
Voltage
Terminal
D107
3
Operated to OPEN
9 - 16 V
Operated to CLOSE
0-1V
Operated to OPEN
0-1V
Operated to CLOSE
9 - 16 V
Operated to OPEN
9 - 16 V
Operated to CLOSE
0-1V
Operated to OPEN
0-1V
Operated to CLOSE
9 - 16 V
Is the inspection result normal?
YES >>
GO TO 11.
NO >>
Replace door mirror assembly.
7. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) AND PASSENGER DOOR MIRROR CONTROL
MODULE POWER SUPPLY CIRCUIT
1. Disconnect power window main switch (mirror control switch) connector and remote controlled mirror switch connector.
2. Ignition switch ON.
3. Check voltage between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D6
3
-
Voltage
Ground
9 – 16 V
4. Check voltage between remote controlled mirror switch harness connector and ground.
+
Passenger door mirror control module
Connector
Terminal
D108
4
-
Voltage
Ground
9 – 16 V
Is the inspection result normal?
YES >>
GO TO 8.
NO >>
Repair or replace harness.
8/17/2023
32 of 49
(5349/MSB23M5190001)
Attached sheet 11 (12/16)
8. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) AND PASSENGER DOOR MIRROR CONTROL
MODULE GROUND CIRCUIT
1. Ignition switch OFF.
2. Check continuity between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D6
22
-
Continuity
Ground
Existed
3. Check continuity between remote controlled mirror switch harness connector and ground.
+
Passenger door mirror control module
Connector
Terminal
D108
12
-
Continuity
Ground
Existed
Is the inspection result normal?
YES >>
GO TO 9.
NO >>
Repair or replace harness.
9. CHECK RETRACTOR MOTOR INPUT SIGNAL 1
1. Disconnect door mirror assembly (LH) and (RH) connector.
2. Check continuity between door mirror assembly (LH) connector and power window main switch connector.
Door mirror assembly
Connector
LH
Power window main switch
Terminal
D16
3
11
Connector
Terminal
18
D6
17
Continuity
Existed
3. Check continuity between door mirror assembly (RH) connector and passenger door mirror control module connector.
Passenger door mirror control
module
Door mirror assembly
Connector
RH
Terminal
D106
3
11
Connector
Continuity
Terminal
8
D108
9
Existed
4. Check continuity between door mirror assembly (LH) and (RH) connector and ground.
Door mirror assembly
Connector
LH
RH
Terminal
D16
D106
-
Continuity
Ground
Not existed
3
11
3
11
Is the inspection result normal?
YES >>
GO TO 10.
NO >>
Repair or replace harnesses.
8/17/2023
33 of 49
(5349/MSB23M5190001)
Attached sheet 11 (13/16)
10. CHECK RETRACTOR MOTOR INPUT SIGNAL 2
1. Connect power window main switch (mirror control switch) connector and passenger door mirror control module connector.
2. Ignition switch ON.
3. With operating the mirror folding/unfolding switch, check the voltage between door mirror assembly harness connector and ground.
+
Door mirror assembly
Connector
-
Condition
11
LH
D16
3
Ground
Mirror folding/unfolding
switch
11
RH
Voltage
Terminal
D106
3
Operated to OPEN
9 - 16 V
Operated to CLOSE
0-1V
Operated to OPEN
0-1V
Operated to CLOSE
9 - 16 V
Operated to OPEN
9 - 16 V
Operated to CLOSE
0-1V
Operated to OPEN
0-1V
Operated to CLOSE
9 - 16 V
Is the inspection result normal?
YES >>
GO TO 11.
NO >>
Replace door mirror assembly.
11. REPLACE POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH)
Replace power window main switch (mirror control switch).
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Refer to GENERAL INFORMATION - BASIC INSPECTION - SERVICE INFORMATION FOR ELECTRICAL INCIDENT - Intermittent Incident Intermittent Incident.
8/17/2023
34 of 49
(5349/MSB23M5190001)
MIRRORS
26
Attached sheet 11 (14/16)
2. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) AND REMOTE CONTROLLED MIRROR SWITCH
POWER SUPPLY CIRCUIT
1. Disconnect power window main switch (mirror control switch) connector and remote controlled mirror switch connector.
2. Ignition switch ON.
3. Check voltage between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D27
3
-
Voltage
Ground
9 – 16 V
4. Check voltage between remote controlled mirror switch harness connector and ground.
+
Remote controlled mirror switch
Connector
Terminal
F25
4
-
Voltage
Ground
9 – 16 V
Is the inspection result normal?
YES >>
GO TO 3.
NO >>
Repair or replace harness.
3. CHECK POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH) AND REMOTE CONTROLLED MIRROR SWITCH
GROUND CIRCUIT
1. Ignition switch OFF.
2. Check continuity between power window main switch (mirror control switch) harness connector and ground.
+
Power window main switch
Connector
Terminal
D27
22
-
Continuity
Ground
Existed
3. Check continuity between remote controlled mirror switch harness connector and ground.
+
Remote controlled mirror switch
Connector
Terminal
F25
12
-
Continuity
Ground
Existed
Is the inspection result normal?
YES >>
GO TO 4.
NO >>
Repair or replace harness.

8/17/2023
35 of 49
(5349/MSB23M5190001)
Attached sheet 11 (15/16)
27
MIRRORS
4. CHECK RETRACTOR MOTOR INPUT SIGNAL 1
1. Disconnect door mirror assembly (LH) and (RH) connector.
2. Check continuity between door mirror assembly (LH) connector and power window main switch connector.
Door mirror assembly
Power window main switch
Continuity
Connector
LH
Terminal
Connector
3
D14
D27
11
Terminal
18
Existed
17
3. Check continuity between door mirror assembly (RH) connector and remote controlled mirror switch connector.
Door mirror assembly
Remote controlled mirror switch
Continuity
Connector
RH
Terminal
Connector
3
D106
F25
11
Terminal
8
Existed
9
4. Check continuity between door mirror assembly (LH) and (RH) connector and ground.
Door mirror assembly
Connector
Continuity
Terminal
LH
D14
RH
D106
3
11
Ground
3
Not existed
11
Is the inspection result normal?
YES >>
GO TO 5
.
NO >>
Repair or replace harnesses.
5. CHECK RETRACTOR MOTOR INPUT SIGNAL 2
1. Connect power window main switch (mirror control switch) connector and remote controlled mirror switch connector.
2. Ignition switch ON.
3. With operating the mirror folding/unfolding switch, check the voltage between door mirror assembly harness connector and ground.
+
Door mirror assembly
Connector
-
Condition
Terminal
Operated to OPEN
11
LH
D14
3
Ground
11
RH
Voltage
D106
3
Mirror folding/unfolding
switch
9 - 16 V
Operated to CLOSE
0-1V
Operated to OPEN
0-1V
Operated to CLOSE
9 - 16 V
Operated to OPEN
9 - 16 V
Operated to CLOSE
0-1V
Operated to OPEN
0-1V
Operated to CLOSE
9 - 16 V
Is the inspection result normal?
YES >>
GO TO 6.
NO >>
Replace door mirror assembly.

8/17/2023
36 of 49
(5349/MSB23M5190001)
Attached sheet 11 (16/16)
MIRRORS
28
6. REPLACE POWER WINDOW MAIN SWITCH (MIRROR CONTROL SWITCH)
Replace power window main switch (mirror control switch).
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Refer to GENERAL INFORMATION - BASIC INSPECTION - SERVICE INFORMATION FOR ELECTRICAL INCIDENT - Intermittent Incident Intermittent Incident.

SYMPTOM DIAGNOSIS
DOOR MIRROR DOES NOT OPERATE
Diagnosis Procedure (Without automatic drive positioner system)
Diagnosis Procedure (Without automatic drive positioner system)
1. CHECK DOOR MIRROR CIRCUIT
Check door mirror. Refer to Diagnosis Procedure Diagnosis Procedure (Without automatic drive positioner system).
Is the inspection result normal?
YES >>
GO TO 2
.
NO >>
Repair or replace the malfunctioning parts.
2. REPLACE DOOR MIRROR MOTOR
Replace door mirror motor. Refer to REMOVAL AND INSTALLATION.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
GO TO 3
.
3. REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch. Refer to Removal and Installation.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Check Intermittent incident. Refer to Intermittent IncidentIntermittent Incident.
Diagnosis Procedure (With automatic drive positioner system)
Diagnosis Procedure (With automatic drive positioner system)
1. CHECK AUTOMATIC DRIVE POSITIONER SYSTEM
Check door mirror operate with automatic drive positioner system. Refer to System Description.
Is the inspection result normal?
YES >>
GO TO 2
.
NO >>
Check automatic drive positioner system operation. Refer to Diagnosis Procedure Diagnosis Procedure.
8/17/2023
37 of 49
(5349/MSB23M5190001)
Attached sheet 18 (1/12)
CAUTION : Be sure to read connector number substitution list when using connector numbers for servicing.
(Refer to, Configuration Diagrams - connector number substitution list)

'2250,5525
$&&5(/$<
$
:,5(&2/25&2'(
(7$&6(&8
'

::+,7(
<<(//2:
55('
33,1.
%%/$&.
/%/8(
**5((1
99,2/(7
*5*5$<
%(%(,*(
%5%52:1
6%6.<%/8(
/*/,*+7*5((1
/:%/8(:+,7(
:5:+,7(5('
*:*5((1:+,7(
<%<(//2:%/$&.
5:5(':+,7(
%5%/$&.5('
%:%/$&.:+,7(
/$</$9(1'(5<(//2:
/$//$9(1'(5%/8(
/$5/$9(1'(55('
/$:/$9(1'(5:+,7(
/$*/$9(1'(5*5((1
/$%/$9(1'(5%/$&.
/$9/$9(1'(59,2/(7
/$3/$9(1'(53,1.
/$6%/$9(1'(56.<%/8(
/$%5/$9(1'(5%52:1
/$%(/$9(1'(5%(,*(
/$/*/$9(1'(5/,*+7*5((1
/$*5/$9(1'(5*5$<


%5

'
/$*
*
%$7


*

%$7
32:(5:,1'2:0$,16:,7&+
)

5

/$<
/$*





:
/
<
9 /*

5(027(&21752//('0,55256:,7&+
)






*
*5
%
'

/$*
/$/





<
/
*
%(
%

 '
/$<
/$/

-& 
)

*

<


-& 
)
/







*


%(

%
'

'2250,5525$66(0%/< /+
)
'2250,5525$66(0%/< 5+
)
'

 
  
           
           






 
  
  
 
     
       
        
)
'
'
)





'2250,5525$66(0%/< 5+
)


 
  
  
     
  
       
        

     
      
)
     
      
)
     
     
)
 

   



8/17/2023
Attached sheet 18 (4/12) to (12/12) 
38 of 49
(5349/MSB23M5190001)
Attached sheet 18 (2/12)
CAUTION : Be sure to read connector number substitution list when using connector numbers for servicing.
(Refer to, Configuration Diagrams - connector number substitution list)

KKZD/ZZKZ
ŽŶŶĞĐƚŽƌEŽ͘
ͲϭϮ
ŽŶŶĞĐƚŽƌEĂŵĞ
&ZKKZt/Z/E',ZE^^E&>KKZ,ZE^^KD/Ed/KE
ŽŶŶĞĐƚŽƌdǇƉĞ
ŽŶŶĞĐƚŽƌŽůŽƌ
,ϲϬ&
Ͳ
56
51
59
55
54
52
dĞƌŵŝŶĂů ŽůŽƌKĨ
EŽ͘
tŝƌĞ
ϭ
Ϯ
ϯ
ϰ
ϱ
ϲ
ϳ
ϴ
ϵ
ϭϮ
ϭϯ
ϭϰ
ϭϱ
ϭϲ
ϭϳ
ϭϴ
ϭϵ
ϮϬ
Ϯϭ
ϮϮ
Ϯϲ
Ϯϳ
Ϯϴ
Ϯϵ
ϯϬ
ϯϭ
ϯϮ
ϯϯ
ϯϰ
ϯϲ
ϯϳ
ϯϴ
ϰϬ
ϰϭ
Z
>Ͳ>
>
'
>
t
'Z

W

>Ͳz
Z
>Ͳ>'
>Ͳz
>ͲW
W
z
'Z
^
Z
>Ͳ>
>Ͳ'
'Z
s
>'

Z
^
>Ͳ>'
'Z
'
z

^
29 30 31 32 33 34
36 37 38
15 16 17 18 19 20 21 22
1 2 3 4 5 6 7 8 9
40 41
26 27 28
12 13 14
ϰϳ
ϰϴ
ϱϭ
ϱϮ
ϱϰ
ϱϰ
ϱϱ
ϱϱ
ϱϲ
ϱϵ
>Ͳ'
s
s

t
'
'
Z
>Ͳt
d
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^΀tŝƚŚϲƐƉĞĂŬĞƌ΁
dK/WE>,ZE^^΀tŝƚŚK^ƐƉĞĂŬĞƌ΁
dK/WE>,ZE^^΀tŝƚŚϲƐƉĞĂŬĞƌ΁
dK/WE>,ZE^^΀tŝƚŚK^ƐƉĞĂŬĞƌ΁
dK/WE>,ZE^^
dK/WE>,ZE^^
dĞƌŵŝŶĂů ŽůŽƌKĨ
EŽ͘
tŝƌĞ
ϭ
Ϯ
ϯ
ϰ
ϱ
ϭϭ
ϭϮ
ϭϯ
ϭϰ
ϭϱ
ϭϲ
Ϯϱ
Ϯϲ
Ϯϳ
Ϯϴ
Ϯϵ
ϯϬ
ϯϭ
ϯϮ
ϯϯ
ϯϳ
ϯϳ
ϯϴ
ϯϴ
ϰϬ
ϰϭ
ϰϳ
ϰϴ
ϱϭ
ϱϮ
ϱϰ
ϱϰ
ϱϱ
ϱϱ
ϱϲ
48
47
ŽŶŶĞĐƚŽƌEŽ͘
Ͳϭϱ
^ŝŐŶĂůEĂŵĞ΀^ƉĞĐŝĨŝĐĂƚŝŽŶ΁
ŽŶŶĞĐƚŽƌEĂŵĞ
d^Ͳh
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
ŽŶŶĞĐƚŽƌdǇƉĞ
ŽŶŶĞĐƚŽƌŽůŽƌ
d,Ϭϴ&tE,
Ͳ
105 103
109 108 107
dĞƌŵŝŶĂů ŽůŽƌKĨ
EŽ͘
tŝƌĞ
ϭϬϯ
ϭϬϱ
ϭϬϳ
ϭϬϴ
ϭϬϵ
^ŝŐŶĂůEĂŵĞ΀^ƉĞĐŝĨŝĐĂƚŝŽŶ΁
^
>Ͳz
>Ͳ>
Z
>Ͳ'
ϭ
ϭ
ϭ
ϭ
ϭ
ŽŶŶĞĐƚŽƌEŽ͘
Ͳϭϴ
ŽŶŶĞĐƚŽƌEĂŵĞ
&>KKZt/Z/E',ZE^^E&ZKEdKKZt/Z/E',ZE^^
;ƉĂƐƐĞŶŐĞƌ͛ƐƐŝĚĞͿKD/Ed/KE
ŽŶŶĞĐƚŽƌdǇƉĞ
ŽŶŶĞĐƚŽƌŽůŽƌ
,ϲϬ&
Ͳ
dK/WE>,ZE^^΀ŽůŽƌŽĨǁŝƌĞǀĂƌŝĞƐĚĞƉĞŶĚŝŶŐŽŶƉƌŽĚƵĐƚŝŽŶ΁
dK/WE>,ZE^^΀ŽůŽƌŽĨǁŝƌĞǀĂƌŝĞƐĚĞƉĞŶĚŝŶŐŽŶƉƌŽĚƵĐƚŝŽŶ΁
dK/WE>,ZE^^΀ŽůŽƌŽĨǁŝƌĞǀĂƌŝĞƐĚĞƉĞŶĚŝŶŐŽŶƉƌŽĚƵĐƚŝŽŶ΁
dK/WE>,ZE^^΀ŽůŽƌŽĨǁŝƌĞǀĂƌŝĞƐĚĞƉĞŶĚŝŶŐŽŶƉƌŽĚƵĐƚŝŽŶ΁
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
Ͳ΀tŝƚŚK^ƐƉĞĂŬĞƌ΁
dK/WE>,ZE^^΀tŝƚŚϲƐƉĞĂŬĞƌ΁
dK/WE>,ZE^^΀tŝƚŚϲƐƉĞĂŬĞƌ΁
dK/WE>,ZE^^΀tŝƚŚK^ƐƉĞĂŬĞƌ΁
dK/WE>,ZE^^
&ͲϬϯ
ŽŶŶĞĐƚŽƌEĂŵĞ
KKZD/ZZKZ^^D>z;>,Ϳ
ŽŶŶĞĐƚŽƌdǇƉĞ
ŽŶŶĞĐƚŽƌŽůŽƌ
,ϭϲD
Ͳ
9 10 11 13 14 15
1 2 3 4 5 6 7
dĞƌŵŝŶĂů ŽůŽƌKĨ
EŽ͘
tŝƌĞ
ϭ
Ϯ
ϯ
ϰ
ϱ
ϲ
ϳ
ϵ
ϭϬ
ϭϭ
ϭϯ
ϭϰ
ϭϱ
^ŝŐŶĂůEĂŵĞ΀^ƉĞĐŝĨŝĐĂƚŝŽŶ΁
t
W
'Z
^

s

Z
'
>'
z
>
Z
WDͲ
,KZ
>
^t
^dн
D
'E
WDн
sZ
KW
D
D
,dн
ŽŶŶĞĐƚŽƌEŽ͘
&Ͳϭϯ
ŽŶŶĞĐƚŽƌEĂŵĞ
WKtZt/EKtD/E^t/d,
ŽŶŶĞĐƚŽƌdǇƉĞ
ŽŶŶĞĐƚŽƌŽůŽƌ
d,Ϯϰ&tE,
Ͳ
51
dĞƌŵŝŶĂů ŽůŽƌKĨ
EŽ͘
tŝƌĞ
55
52
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
dK/WE>,ZE^^
ŽŶŶĞĐƚŽƌEŽ͘
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
56
54
>
'
>'
t
Z

Z
>Ͳz
'
>Ͳ>'
>Ͳ^
>Ͳ
>Ͳ>
>Ͳ'
Z
s
>'

'Z
W
'
Z
^
z

^
>
>Ͳ>
s

'
t
'
Z
Z
^ŝŐŶĂůEĂŵĞ΀^ƉĞĐŝĨŝĐĂƚŝŽŶ΁
29 30 31 32 33
15 16
1 2 3 4 5
37 38
40 41
25 26 27 28
11 12 13 14
48
47
ϭ
Ϯ
ϯ
ϰ
Z
Z
'
>
^ŝŐŶĂůEĂŵĞ΀^ƉĞĐŝĨŝĐĂƚŝŽŶ΁
ZhW
WDн
d
>/E

8/17/2023
39 of 49
(5349/MSB23M5190001)
CAUTION : Be sure to read connector number substitution list when using connector numbers for servicing.
(Refer to, Configuration Diagrams - connector number substitution list)
Attached sheet 18 (3/12)

KKZD/ZZKZ
ϱ
ϲ
ϳ
ϴ
ϴ
ϵ
ϭϬ
ϭϭ
ϭϮ
ϭϯ
ϭϰ
ϭϱ
ϭϲ
ϭϳ
ϭϴ
ϭϵ
ϮϬ
Ϯϭ
ϮϮ
Ϯϯ
Ϯϰ

s
'
W
t
Z
z
t
s
^
t
Z
>'
>'
'Z

W
>

^
W
^hW
D
D
D΀tŝƚŚDĞŵŽƌǇ΁
D΀tŝƚŚŽƵƚDĞŵŽƌǇ΁
D
D
ZZt
t><
Zt
WtͲ
^t
ZZhW
KW
>
>
KW
D
'E
Z>t
Z>hW
ŽŶŶĞĐƚŽƌEŽ͘
&Ͳϭϲ
ŽŶŶĞĐƚŽƌEĂŵĞ
KKZD/ZZKZ^^D>z;Z,Ϳ
ŽŶŶĞĐƚŽƌdǇƉĞ
ŽŶŶĞĐƚŽƌŽůŽƌ
,ϭϲD
Ͳ
9 10 11 13 14 15
1 2 3 4 5 6 7
dĞƌŵŝŶĂů ŽůŽƌKĨ
EŽ͘
tŝƌĞ
ϭ
Ϯ
ϯ
ϰ
ϱ
ϲ
ϳ
ϵ
ϭϬ
ϭϭ
ϭϯ
ϭϰ
t
'Z
'
^
>'
>
s
Z
Z

z
'
ϭϱ
W
ŽŶŶĞĐƚŽƌEŽ͘
&Ͳϭϴ
ŽŶŶĞĐƚŽƌEĂŵĞ
:ͬ;ϯϮͿ
ŽŶŶĞĐƚŽƌdǇƉĞ
ŽŶŶĞĐƚŽƌŽůŽƌ
,ϴ&
Ͳ
ϴ
ϵ
ϭϬ
ϭϭ
ϭϮ
'

'
z

>
KW
D
D
'E
8 7 6 5 4 3 2 1
dĞƌŵŝŶĂů ŽůŽƌKĨ
EŽ͘
tŝƌĞ
ϭ
Ϯ
ϯ
ϰ
ϱ
ϲ
ϳ
ϴ
^ŝŐŶĂůEĂŵĞ΀^ƉĞĐŝĨŝĐĂƚŝŽŶ΁


^
Z

s


'E
'
'E
'E
'E
'E
'E
'E
ŽŶŶĞĐƚŽƌEŽ͘
&ͲϮϱ
ŽŶŶĞĐƚŽƌEĂŵĞ
ZDKdKEdZK>>D/ZZKZ^t/d,
ŽŶŶĞĐƚŽƌdǇƉĞ
ŽŶŶĞĐƚŽƌŽůŽƌ
d,ϭϮ&tE,
Ͳ
6 5 4 3 2 1
12 11 10 9 8 7
^ŝŐŶĂůEĂŵĞ΀^ƉĞĐŝĨŝĐĂƚŝŽŶ΁
WDͲ
,KZ
>
^t
^dн
D
'E
WDн
sZ
KW
D
D
,dн
dĞƌŵŝŶĂů ŽůŽƌKĨ
EŽ͘
tŝƌĞ
ϭ
Ϯ
ϯ
ϰ
ϱ
ϲ
ϳ
'Z
Z
>
>Ͳ'
t
Z
>
^ŝŐŶĂůEĂŵĞ΀^ƉĞĐŝĨŝĐĂƚŝŽŶ΁
,KZ
sZ
D
d
WDͲ
WDн
>/E

8/17/2023
40 of 49
(5349/MSB23M5190001)
Attached sheet 18 (4/12)
'2250,5525:,7+2870(025<)81&7,21 '2250,5525 !
POWER WINDOW MAIN SWITCH
AROUND VIEW
MONITOR
CONTROL UNIT
FUSE BLOCK (J/B)
ACC RELAY
WIRE COLOR CODE
W :WHITE
Y : YELLOW
R :RED
P :PINK
B :BLACK
L :BLUE
G :GREEN
V :VIOLET
GR :GRAY
BE :BEIGE
BR : BROWN
SB :SKY BLUE
LG :LIGHT GREEN
L-W : BLUE-WHITE
W-R : WHITE-RED
G-W : GREEN-WHITE
Y-B : YELLOW-BLACK
R-W : RED-WHITE
B-R : BLACK-RED
B-W : BLACK-WHITE
LA-Y : LAVENDER-YELLOW
LA-L : LAVENDER-BLUE
LA-R : LAVENDER-RED
LA-W : LAVENDER-WHITE
LA-G : LAVENDER-GREEN
LA-B : LAVENDER-BLACK
LA-V : LAVENDER-VIOLET
LA-P : LAVENDER-PINK
LA-SB : LAVENDER-SKY BLUE
LA-BR : LAVENDER-BROWN
LA-BE : LAVENDER-BEIGE
LA-LG : LAVENDER-LIGHT GREEN
LA-GR : LAVENDER-GRAY
DOOR MIRROR RH
DF3000KBAB
8/17/2023
41 of 49
(5349/MSB23M5190001)
Attached sheet 18 (5/12)
'2250,5525:,7+2870(025<)81&7,21 '2250,5525 ! &217,18('
POWER WINDOW MAIN SWITCH
BCM
DOOR MIRROR LH
DOOR MIRROR RH
DF3000KCAB
8/17/2023
42 of 49
(5349/MSB23M5190001)
Attached sheet 18 (6/12)
'2250,5525:,7+2870(025<)81&7,21 '2250,5525 ! &217,18('
DF3000KDAB
8/17/2023
43 of 49
(5349/MSB23M5190001)
Attached sheet 18 (7/12)
'2250,5525:,7+2870(025<)81&7,21 '2250,5525 ! &217,18('
DF3000KDAC
8/17/2023
44 of 49
(5349/MSB23M5190001)
Attached sheet 18 (8/12)
'2250,5525:,7+0(025<)81&7,21 '2250,5525 !
AROUND VIEW
MONITOR
CONTROL UNIT
ACC
RELAY
POWER WINDOW
MAIN SWITCH
FUSE BLOCK (J/B)
BCM
WIRE COLOR CODE
W :WHITE
Y : YELLOW
R :RED
P :PINK
B :BLACK
L :BLUE
G :GREEN
V :VIOLET
GR :GRAY
BE :BEIGE
BR : BROWN
SB :SKY BLUE
LG :LIGHT GREEN
L-W : BLUE-WHITE
W-R : WHITE-RED
G-W : GREEN-WHITE
Y-B : YELLOW-BLACK
R-W : RED-WHITE
B-R : BLACK-RED
B-W : BLACK-WHITE
LA-Y : LAVENDER-YELLOW
LA-L : LAVENDER-BLUE
LA-R : LAVENDER-RED
LA-W : LAVENDER-WHITE
LA-G : LAVENDER-GREEN
LA-B : LAVENDER-BLACK
LA-V : LAVENDER-VIOLET
LA-P : LAVENDER-PINK
LA-SB : LAVENDER-SKY BLUE
LA-BR : LAVENDER-BROWN
LA-BE : LAVENDER-BEIGE
LA-LG : LAVENDER-LIGHT GREEN
LA-GR : LAVENDER-GRAY
PASSENGER DOOR MIRROR
CONTROL MODULE
DOOR
MIRROR RH
DF3000KEAB
8/17/2023
45 of 49
(5349/MSB23M5190001)
Attached sheet 18 (9/12)
'2250,5525:,7+0(025<)81&7,21 '2250,5525 ! &217,18('
POWER WINDOW MAIN SWITCH
BCM
DOOR
MIRROR LH
DOOR
MIRROR RH
DF3000KFAB
8/17/2023
46 of 49
(5349/MSB23M5190001)
Attached sheet 18 (10/12)
'2250,5525:,7+0(025<)81&7,21 '2250,5525 ! &217,18('
DF3000KGAB
8/17/2023
47 of 49
(5349/MSB23M5190001)
Attached sheet 18 (11/12)
'2250,5525:,7+0(025<)81&7,21 '2250,5525 ! &217,18('
DF3000KGAC
8/17/2023
48 of 49
(5349/MSB23M5190001)
Attached sheet 18 (12/12)
'2250,5525:,7+0(025<)81&7,21 '2250,5525 ! &217,18('
8/17/2023
49 of 49
(5349/MSB23M5190001)