No. 15-20

Installation and Conversion Instructions
Cayenne (9YA)
15/20
ENU
9163
9
PORSCHE Front Camera (Dashcam)
Revision:
This bulletin replaces bulletin Group 9 15/20, dated April 6, 2023.
Model Year:
As of 2019
Information:
Retrofitting
Figure 1
Note:
The Porsche front camera (dashcam  Figure 1) is affixed to the LEFT of the interior mirror (viewed in
direction of travel) on the windshield and is connected to the vehicle electrical system.
It is ideal for making video recordings of driving situations and while parking. It can be configured and
operated using a related app on your smartphone.
Recorded videos are stored on the supplied SD card and previous recordings are overwritten.
If the dashcam detects a shake/vibration or if the radar sensor is triggered, the recorded video is stored
separately and not overwritten. Recordings can be downloaded directly from the SD card or via the app.
Tequipment
Aug 11, 2023
Page 1 of 21
9
Cayenne (9YA)
9163
ENU
15/20
Installation and Conversion Instructions
Information
Important information for customers/customer service advisors:
•
Ask customers to download and install the "Porsche Dashcam App" from the App Store (Apple or
Google Play) on their device (smartphone/tablet) in advance.
For vehicle handover:
•
Recommendation: If the vehicle is present, connect the Porsche front camera WiFi to the vehicle
WiFi (see also vehicle operating instructions Porsche Connect).
•
Together with the customer, check whether a firmware update via "Porsche Dashcam App" is
necessary. Perform the firmware update together if necessary.
•
Together with the customer, choose the "Region/State/Country" by selecting the relevant flag and
format the SD card.
Further information for customers:
Parts Info:
Aug 11, 2023
Page 2 of 21
•
The customer is responsible for choosing the right "Region/State/Country"!
•
After crossing a national border: Update the "Region/State/Country" (see also conditions of use for
this topic)!
9Y0.044.930
 PORSCHE front camera (dashcam), set
Tequipment
Installation and Conversion Instructions
Cayenne (9YA)
15/20
ENU
9163
9
Parts List:
Figure 2
———
1x
3M privacy film (front & rear camera)  Figure 2 -1-
———
1x
Front camera  Figure 2 -2-
———
1x
———
1x
———
1x
———
3x
Micro SD memory card (32 GB, plugged into front camera) 
Figure 2 -3Front camera retainer plate assembly with wire harness  Figure
2 -4Wire harness assembly with connector (3-pin, wire approx. 4 m
long)  Figure 2 -5Protective foam (∅ approx. 29 x 74)  Figure 2 -6-
———
7x
Tie-wrap, 145 x 3.6 x 1.1  Figure 2 -7-
N .907.326.01
4x
Socket contact, 4.8 x ∅ 1.0 mm²  Figure 2 -8-
N .907.327.01
2x
N .906.844.01
3x
999.650.136.22
4x
Socket contact, 4.8 x ∅ 2.5 mm² (standard power timer) 
Figure 2 -9Socket contact, 2.8 x ∅ 1.0 mm² (junior power timer)  Figure 2
-10Socket contact, 5.0 x ∅ 1.0 mm²  Figure 2 -11-
N .017.506.5
2x
Cable ring eyelet, A6  Figure 2 -12-
992.971.859.B
2x
Cable ring eyelet, M8  Figure 2 -13-
Tequipment
Aug 11, 2023
Page 3 of 21
9
Cayenne (9YA)
9163
Repair Kits:
ENU
Installation and Conversion Instructions
15/20
N .102.615.01
2x
Blade-type fuse, 5 amp (mini)  Figure 2 -14-
N .017.131.16
2x
Blade-type fuse, 5 amp  Figure 2 -15-
———
1x
PORSCHE dashcam operating instructions  Figure 2 -16-
ONLY order when replacing the windshield/rear window:
9Y0.044.931
1x
"Adhesive pad" repair kit, includes:
———
1x
———
1x
Adhesive pad for front camera retainer plate (grey) on backing
sheet
Adhesive pad for rear camera (grey)
———
1x
3M privacy film (front & rear camera)  Figure 2 -1-
ONLY order if front camera "wiring harness" is damaged:
Technical
Details:
Materials:
Tools:
9Y0.044.931
1x
"Adhesive pad" repair kit
9Y0.044.932
1x
Wiring harness repair kit, includes:
———
1x
———
1x
Front camera retainer plate assembly with wire harness
(WITHOUT adhesive pads, similar to  Figure 2 -4-)
Wire harness assembly with connector (3-pin, wire approx. 4 m
long)  Figure 2 -5Protective foam (∅ approx. 29 x 74)  Figure 2 -6-
———
3x
———
7x
Tie-wrap, 145 x 3.6 x 1.1  Figure 2 -7-
———
1x
Bag with socket contacts, cable ring eyelets and fuses  Figure
2 -8-15-
•
•
•
•
•
•
•
Video recording in Quad High Definition (QHD)
Lens with polarization filter to reduce reflections and improve colors and contrasts
Audio recording (can be deactivated)
Global positioning system (GPS) sensor
Vibration sensor
Radar sensor for video recording when an object is approaching the vehicle
Bracket for the windshield for fixed mounting on the vehicle
———
1x
Auxiliary line (Tekalan or Teflon hose) approx. 1,500 mm long
———
1x
Wrapping/insulating tape (commercially available)
———
1x
Cleaning cloth (commercially available)
———
1x
- Isopropanol (commercially available)
P90999 - PIWIS Tester 4
VAS 6427 - Release pliers
Tablet, smartphone or PC with Internet access
Aug 11, 2023
Page 4 of 21
Tequipment
Installation and Conversion Instructions
Cayenne (9YA)
15/20
ENU
9163
9
Marking pencil/chalk
Hand lamp
Plastic squeegee
Fitting:
1
Preparatory work
1.1
Clean inside and outside of the windscreen.
1.2
Connect a battery charger.  Workshop Manual '2X00IN Work instructions after disconnecting the battery' or  Workshop Manual '2X00IN Trickle charging 12-volt lithium-ion
battery'.
1.3
Expose front roof/(interior) rear-view mirror
area ( Figure 3)
1
2
3
4
1.4
–
–
–
–
Roof console (front)
Cover on antenna
Sun visor
A-pillar trim panel (upper part)
1.3.1
Remove front roof console and
front cover.  Workshop Manual
'708319 Removing and installing
front roof trim panel'
1.3.2
Figure 3
Remove sun visor (left/right). 
Workshop Manual '682319 Removing and installing sun visor'
Expose A-pillar area (at left) ( Figure 4 (LHD
vehicle))
1
2
3
4
5
–
–
–
–
–
Cover for dashboard (left)
Side-section trim panel (left)
A-pillar trim panel (lower part)
Inner door sill trim (left)
Footrest
1.4.1
Removing and installing A-pillar
trim panel (upper part, left side)
 Workshop Manual '70571903
Removing and installing A-pillar trim
panel (upper part)'
1.4.2
Removing and installing A-pillar trim
panel (lower part)  Workshop
Manual '70571901 Removing and
installing A-pillar trim panel (lower
part)'
Tequipment
Figure 4 (LHD vehicle)
Aug 11, 2023
Page 5 of 21
9
Cayenne (9YA)
9163
ENU
Installation and Conversion Instructions
15/20
1.4.3
Remove dashboard cover (left side):
LHD vehicles:  Workshop Manual '70221901 Removing and installing cover
dashboard (on driver's side)'
1.4.4
Loosen fuse box in front left
footwell.  Workshop Manual
'978409 Loosening and securing
fuse box in front left footwell'
1
2
D
E
1.5
2
– Fuse box (front left
footwell)
– Ground pin 13 (MB13)
– Fuse holder, row D
– Fuse holder, row E
Loosen front headliner, left and center,
using the VAS 6427 - release pliers. 
Workshop Manual '708419 Removing and
installing roof trim panel'
Fit PORSCHE front camera (dashcam) in the vehicle
Figure 5 (LHD vehicle)
Overview of installation position
1
2
3
4
5
2.1
– Interior mirror
– Installation position of PORSCHE front
camera (dashcam)
– Electric wire harness
– Fuse box in footwell (left)
– Ground pin 13 (MB13)
Position front camera (dashcam) to the LEFT
of the interior mirror on the windscreen
Figure 6
Aug 11, 2023
Page 6 of 21
Tequipment
Installation and Conversion Instructions
2.1.1
Cayenne (9YA)
15/20
ENU
9163
9
Fit retainer plate with wire harness
on the base of the front camera until
the locking mechanism engages
( Figure 7).
1
2
– Retainer plate with wire
harness
– Front camera base
Figure 7
2.1.2
Trace the outline of the interior
mirror ( Figure 8 -1-) on the
outside of the windscreen using a
marking pencil/chalk.
1
2
3
4
X
Z
2.1.3
– Interior mirror base
– Outline of front camera
base
– Interior mirror
– Front camera
– 9YA: 215 mm / 9YB: 158
mm
– 9YA: 108 mm / 9YB: 183
mm
Copy dimensions X and Z on the
windscreen ( Figure 8 -top-).
Cayenne (9YA)
•
•
Figure 8
Dimension X = distance from
lower edge of outline of front camera base to edge of roof: Length 215 mm
Dimension Z = distance from inner edge of outline of front camera base to
inner edge of interior mirror base: Length 108 mm
Cayenne Coupé (9YB):
Tequipment
Aug 11, 2023
Page 7 of 21
9
Cayenne (9YA)
9163
ENU
Installation and Conversion Instructions
15/20
•
•
Dimension X = distance from lower edge of outline of front camera base to
edge of roof: Length 158 mm
Dimension Z = distance from inner edge of outline of front camera base to
inner edge of interior mirror base: Length 183 mm
Information
Observe the following points during positioning/alignment:
2.2
•
Sufficient distance between front camera and interior mirror base: at least 5
mm/ 0.2 in!
•
Get another person standing in front of the vehicle to check and confirm the
horizontal alignment of the camera with the PORSCHE logo!
2.1.4
Position front camera with retainer plate in the vehicle at the marking on the windscreen ( Figure 8 -Arrows-).
2.1.5
Get another person to trace and shade in the outline of the retainer plate on the
outside of the windscreen using a marking pencil/chalk.
2.1.6
Clean the inside of the windscreen in the bonding area for the retainer plate
(shaded area) to remove any dust and grease.
Fit front camera (dashcam) on the windscreen
NOTICE
Adhesive films not prepared/installed correctly
Aug 11, 2023
Page 8 of 21
•
Damage to adhesive films
•
Inadequate adhesion of adhesive films

Carefully clean the areas on which you intend to stick the film to ensure that all traces
of oil, grease and silicone are completely removed.

Do not touch the bonding surfaces.

Object (adhesive film, vehicle, etc.) and ambient temperature: Minimum temperature
15°C / 59°F.
Tequipment
Installation and Conversion Instructions
2.2.1
Cayenne (9YA)
15/20
ENU
9163
9
Pull 3M privacy film off the backing
sheet ( Figure 9 -A-).
1
2
3
– 3M privacy film
– Marked bonding surface
– Interior mirror base
2.2.2
Position 3M privacy film on the
marked bonding surface on the
windscreen ( Figure 9 -B-)
2.2.3
Carefully affix 3M privacy film using
a plastic squeegee, starting from
the center and moving towards the
edge.
Figure 9
2.2.4
Pull protective film off the front
camera retainer plate ( Figure
10 -top-).
1
2
3
4
–
–
–
–
Protective film
Front camera
3M privacy film
Interior mirror
Information
Observe the following points during
positioning/alignment:
•
Sufficient distance between
front camera and interior
mirror base: at least 5 mm/
0.2 in!
•
Get another person standing
Figure 10
in front of the vehicle to check
and confirm the horizontal alignment of the camera with the PORSCHE logo!
Align front camera with retainer plate symmetrically with respect to the 3M privacy
film ( Figure 10 -bottom-).
2.2.5
Press front camera with retainer plate firmly onto the 3M privacy film on the windscreen.
Tequipment
Aug 11, 2023
Page 9 of 21
9
Cayenne (9YA)
9163
ENU
3
Installation and Conversion Instructions
15/20
Route and connect electric wire harness
1
2
3
4
5
– Interior mirror
– Installation position of PORSCHE front
camera (dashcam)
– Electric wire harness
– Fuse box in footwell (left)
– Ground pin 13 (MB13)
Line routing ( Figure 11):
•
Front camera → headliner/roof console →
along windscreen frame → left A-pillar (top) →
along A-pillar → fuse carrier in footwell, left →
ground pin 13 (MB13)
Figure 11
Information
Route electric wire harness along existing wiring, if installed.
Make sure that safety components (airbags, etc.) are still working correctly!
3.1
Routing wire harness
3.1.1
On the connector side, push one
protective foam roll onto the wire
harness for the front camera
retainer plate and the (3-wire) wire
harness.
1
2
3
4
Aug 11, 2023
Page 10 of 21
– Protective foam roll
– Wire harness on front
camera retainer plate
– Wire harness (3-wire)
– Branch for 2nd Camera
3.1.2
Connect plug connection (3-pin) (
Figure 12 -Arrows-).
3.1.3
Guide wire harness for front camera (dashcam) vertically with respect to the
headliner/roof console.
Tequipment
Figure 12
Cayenne (9YA)
Installation and Conversion Instructions
3.1.4
15/20
ENU
9163
9
Push protective foam roll over the
(3-pin) plug connection.
1
2
3
– Wire harness for front
camera (dashcam)
– Protective foam roll
– Tie-wrap
Secure (3-pin) plug connection to
existing components/lines under
the headliner in the roof console
area using tie-wraps.
3.1.5
Figure 13
Branch for 2nd camera and secure
it to existing components/lines in the roof console area using another protective
foam roll ( Figure 13).
3.1.6
Route the rest of the wire harness
as follows:
1
2
3
•
3.2
– Headliner
– Wire harness (3-wire)
– Tie-wrap
Roof console → under
headliner along windscreen
frame → left A-pillar (top, if
required in the cable duct) →
along A-pillar → ( Figure 14)
→ fuse carrier in footwell (left)
→ BK 0.5² line → ground pin
13 (MB13)
Connect electric wire harness
Figure 14
Function/line:
Connection point – LHD vehicles
Weight
Terminal 31 = BK; 0.5²
Cable ring eyelet A6 (N.017.506.5) on ground pin 13 (MB13,
footwell, left A-pillar)
Ignition positive
Terminal 15 = GN; 0,5²
Socket contact, 2.8 x ∅1.0 mm² (Junior Power Timer
N.906.844.01) in slot 6, fuses, row D (D6)
Permanent positive
Terminal 30 = RD; 0.5²
Socket contact, 2.8 x ∅1.0 mm² (Junior Power Timer
N.906.844.01) in slot 3, fuses, row E (E3)
3.2.1
Open fuse holders in row D and E.
Tequipment
Aug 11, 2023
Page 11 of 21
9
Cayenne (9YA)
9163
ENU
Installation and Conversion Instructions
15/20
3.2.2
Shorten lines GN; 0.5² and RD; 0.5² to the relevant fuse holders and crimp the
relevant contacts.
3.2.3
Connect power supply as shown in
the table ( Figure 15).
1
2
3
4
– Fuse carrier in footwell
(left)
– Wire harness (3-wire)
– BK; 0.5² line (terminal 31)
– Ground pin 13 (MB13)
3.2.4
Close fuse holders in row D and
E and fit in the footwell with the
fuse carrier.  Workshop Manual
'978409 Loosening and securing
fuse box in front left footwell'
3.2.5
Protect the front camera power
supply with new fuses ( Figure 15
-D6 and E3-).
Fuse: Setpoint value 5 A
3.2.6
Figure 15
Route line BK; 0.5² (terminal 31) to the ground pin 13 (MB13  Figure 15 -4-),
shorten it and fit it on the ground pin using cable ring eyelet A6.
Tightening torque 9 Nm
3.3
4
Aug 11, 2023
Page 12 of 21
Secure routed wire harness to existing lines/components in the vehicle with tie-wraps without
tensile stress and so that no chafing occurs.
Concluding work in vehicle interior
4.1
Secure front roof trim panel at the left and center.  Workshop Manual '708419 Removing
and installing roof trim panel'
4.2
Assemble A-pillar area (left).
4.3
Assemble front roof/(internal) rear-view mirror area.
Tequipment
Installation and Conversion Instructions
Coding:
5
Cayenne (9YA)
15/20
ENU
9163
9
Code the PORSCHE front camera (dashcam) in Dealer mode
5.1
Preparatory work
1
2
3
4
5
6
5.2
–
–
–
–
–
–
PORSCHE front camera
Micro SD memory card (32 GB)
Retainer plate
Power button
WiFi status LED display
PRESS (release button)
5.1.1
Remove micro SD memory card (32
GB,  Figure 16 -2-) from card slot
for front camera.
5.1.2
Figure 16
With the ignition switched on, push
the front camera (dashcam  Figure 16 -1-) into the retainer plate on the windscreen ( Figure 16 -3-)
5.1.3
Press the power button ( Figure 16 -4-) for 10 seconds until you hear the second
double beeping sound.
5.1.4
The front camera (dashcam) starts in Dealer mode: WiFi LED ( Figure 16 -5-)
lights up "yellow".
Connect the front camera (dashcam) to the device (tablet, smartphone or PC)
Information
The "Dealer mode" network ID name ends with a "D". A password is NOT required!
The language setting can be changed by following the menu prompts after opening
the first page.
5.2.1
Search available networks for Dealer mode WiFi.
5.2.2
Open Dealer mode on the device (tablet, smartphone or PC) using any browser.
To do this, enter "192.168.1.1/diagnostics" in the browser's address line.
5.2.3
Displays in "Dealer mode" main menu:
Tequipment
Aug 11, 2023
Page 13 of 21
9
Cayenne (9YA)
9163
ENU
Installation and Conversion Instructions
15/20
Options: ( Figure 17)
1
2
– Browser's address line
– "Options" menu item
Figure 17
Diagnosis: ( Figure 18)
1
2
5.3
– Browser's address line
– "Diagnostics" menu item
Basic settings for front camera (dashcam) in
the "Options" menu item ( Figure 17)
Figure 18
Aug 11, 2023
Page 14 of 21
Tequipment
Installation and Conversion Instructions
5.3.1
Cayenne (9YA)
15/20
ENU
9163
9
Change the default language
"English" to the desired language:
1
2
– Default language "English"
– German
Example: German ( Figure 19)
•
Up to 19 different languages
can be selected.
Figure 19
Information
ONLY for cameras with serial numbers "PDF2101*****", the country can be
selected directly via the app on the customer's device (smartphone/tablet).
Country selection is possible for cameras, starting with the serial number
"PDF2102*****"!
If the relevant country is NOT displayed in the drop-down menu:
Please select “Global”.
5.3.2
Select country ( Figure 20).
1
2
3
•
•
•
– Serial number of front
camera (dashcam)
– Country
– Great Britain
Up to 48 countries are
currently available for
selection.
The Country selection screen
includes, for example: Units
of measurement, frequencies
and also legal regulations of
the respective country.
Figure 20
Cayenne:  Choose Region/State/Country by selecting the appropriate
flag.
Tequipment
Aug 11, 2023
Page 15 of 21
9
Cayenne (9YA)
9163
ENU
Installation and Conversion Instructions
15/20
5.3.3
Select the required camera channel
( Figure 21).
1
2
•
– Channel
– Front + Rear
TEQUIPMENT:  "Front Only"
(front camera) is preset.
Figure 21
Information
Check which vehicle electrical system battery is installed in the vehicle if necessary
by entering the vehicle identification number (VIN) in the Porsche Central Service
System (PCSS).
Background: The front camera shuts down if the correct battery voltage
(switch-off threshold) is not reached over a period of 5 minutes.
Aug 11, 2023
Page 16 of 21
•
Switch-off threshold for lead-acid battery (PbAcid) = 11 V
•
Switch-off threshold for lithium-ion battery (LiFePO) = 13 V
Tequipment
Installation and Conversion Instructions
5.3.4
Cayenne (9YA)
15/20
ENU
9163
9
Select the battery type ( Figure
22)
1
2
•
•
– Battery
– PbAcid
Select the vehicle electrical
system battery installed in the
vehicle.
Cayenne:  Lead-acid
battery (PbAcid) OR 
Lithium-ion battery (LiFePo)
Figure 22
5.3.5
Select Park mode ( Figure 23)
1
2
•
•
– Park mode
– Off
Depending on the approval for
the respective vehicle.
Cayenne:  Select "On".
Figure 23
Tequipment
Aug 11, 2023
Page 17 of 21
9
Cayenne (9YA)
9163
ENU
Installation and Conversion Instructions
15/20
5.3.6
Select the time limit ( Figure 24)
1
2
•
•
5.4
– Time limit until radar/video
is switched off
– 1 hour
Turn off radar/video monitoring in Park mode (battery
management). After the
selected time limit, fast
activation of the monitoring
system ONLY occurs if the
vehicle shakes/vibrates!
Cayenne:  Skip. Leave the
default setting.
Cancel Dealer mode (WiFi LED is still yellow)
5.4.1
Close the browser and switch off
ignition.
5.4.2
Pull the front camera (dashcam) off the retainer plate by pressing "PRESS" (release
button).
5.4.3
Insert micro SD memory card (32 GB) in the front camera (dashcam).
5.4.4
Fit the front camera (dashcam) in the retainer plate.
Figure 24
5.5
The settings configured under Step 5.3 are set when the ignition is switched on again.
5.6
Format the micro SD memory card (32 GB)
5.6.1
Switch on ignition.
5.6.2
Press the power button quickly 6 times in a row within 3 seconds.
Announcements via front camera loudspeaker: “Formatting in progress.” and
“Formatting completed.”
Diagnostics:
6
Perform diagnostics on front camera (dashcam) – ONLY if necessary!
Information can be displayed, function tests can be run and results can be stored in the "Diagnostics"
menu item.
Aug 11, 2023
Page 18 of 21
Tequipment
Installation and Conversion Instructions
6.1
Cayenne (9YA)
15/20
ENU
9163
9
Information about the model name, hardware
and software version, radar and more
( Figure 25).
1
2
3
– Model name
– Hardware version
– Software version
Figure 25
6.2
Display of live images from front camera,
connection status, memory card status, GPS
and radar status and more ( Figure 26).
1
2
3
4
5
–
–
–
–
–
Front camera live image
Rear camera status (if installed)
Micro SD memory card contents
GPS status
GPS coordinates
Figure 26
Tequipment
Aug 11, 2023
Page 19 of 21
9
Cayenne (9YA)
9163
ENU
6.3
Display of radar status, possible tests for
LED lights, loudspeaker and microphone
( Figure 27)
1
2
3
4
6.4
Installing:
7
Installation and Conversion Instructions
15/20
–
–
–
–
Radar status
LED Lights test
Loudspeaker test
Microphone test
The fault report can be stored on the micro
SD memory card (32 GB). To do this, use
micro SD memory card in Dealer mode and
select "Diagnostics" menu item in the front
camera.
Concluding work
7.1
Read out the fault memories of all systems,
work through any existing faults and erase
Figure 27
the fault memories.  Workshop Manual
'0X03IN Diagnostic maintenance: diagnostic system and maintenance inter…'
7.2
Disconnect the battery charger.  Workshop Manual '2X00IN Work instructions after
disconnecting the battery' or  Workshop Manual '2X00IN Trickle charging 12-volt
lithium-ion battery'
7.3
Vehicle handover to customer
Information
Please pass all this information on to the customer.
Also give the customer the PORSCHE dashcam operating instructions.
Also give the first 3 pages of these Installation and Conversion Instructions to the customer.
Aug 11, 2023
Page 20 of 21
7.3.1
Download the app from the App Store to the customer's device
(smartphone/tablet).
7.3.2
If the vehicle is present, connect the Porsche front camera WiFi to the vehicle WiFi
(see also vehicle operating instructions  Porsche Connect).
7.3.3
Select and set Region/State/Country (flag) in the app on the customer's
smartphone/tablet.
7.3.4
Get the customer to perform firmware update using the app.
7.3.5
Format micro SD memory card (32 GB).
Tequipment
Installation and Conversion Instructions
91 63 23 40:
Cayenne (9YA)
15/20
–Retrofitting PORSCHE front camera (dashcam) (1 x)–
Includes:
Installing retainer plate for PORSCHE front camera (dashcam)
on windshield.
Routing and connecting electric wire harness.
Coding PORSCHE front camera (dashcam) in Dealer mode and
formatting micro SD memory card.
Reading out fault memories and correcting and deleting faults.
ENU
9163
9
Labor time: 293 TU
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2023 Porsche Cars North America, Inc.
Tequipment
Aug 11, 2023
Page 21 of 21