23N01

Stacy L. Balzer
Operating Director
Service Engineering Operations
Ford Customer Service Division
Ford Motor Company
P. O. Box 1904
Dearborn, Michigan 48121
September 11, 2023
TO:
All U.S. Ford and Lincoln Dealers
SUBJECT:
Customer Satisfaction Program 23N01
Certain 2015-2019 Model Year Transit Vehicles with 3.2L Diesel Engine
Crankcase Ventilation Hose Assembly Replacement and Powertrain
Control Module Software Update
PROGRAM TERMS
This program provides a one-time repair (if needed) free of charge (parts and labor) to the Crankcase
Ventilation (CCV) Hose Assembly for 11 years of service or 120,000 miles from the warranty start
date of the vehicle, whichever occurs first.
This is a one-time repair program.
If a vehicle has already exceeded either the time or mileage limits, then this repair offer will last until
March 18, 2024.
Coverage is automatically transferred to subsequent owners.
VEHICLES COVERED BY THIS PROGRAM
Vehicle
Model Year
Assembly Plant
Transit
2015-2019
Kansas City
Build Dates
January 17, 2014 through October 24, 2019
US population of affected vehicles: 27,976. Affected vehicles are identified in OASIS.
REASON FOR PROVIDING A NO-COST, ONE-TIME REPAIR
In the affected vehicles, the Malfunction Indicator Light (MIL) may illuminate and store one or more of
the following diagnostic trouble codes (DTCs) P04DB, P04E2 and P04E3. This could be due to a
faulty CCV monitor sensor, which may illuminate the MIL when the CCV hose assembly is still
properly connected.
SERVICE ACTION
If an affected vehicle exhibits this condition and if the vehicle is still within the time and mileage limits,
then dealers are to replace the existing CCV hose assembly with a new design that incorporates
tamper proof connections without a CCV monitor sensor. The unused wiring branch of the CCV
monitor sensor will be capped and stowed and a new calibration will be installed to accommodate the
removed sensor. This service must be performed at no charge to the vehicle owner.
OWNER NOTIFICATION MAILING SCHEDULE
Owner Letters are expected to be mailed the week of September 18, 2023. Dealers should complete
the repair if required and if the vehicle is eligible, whether or not the customer has received a letter.
ATTACHMENTS
Attachment I:
Administrative Information
Attachment II:
Labor Allowances and Parts Ordering Information
Attachment III:
Technical Information
Attachment IV:
Mobile Service Repair Assessment
Owner Notification Letters
© Copyright 2023 Ford Motor Company
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Sincerely,
Stacy L. Balzer
© Copyright 2023 Ford Motor Company
ATTACHMENT I
Page 1 of 3
Customer Satisfaction Program 23N01
Certain 2015-2019 Model Year Transit Vehicles with 3.2L Diesel Engine
Crankcase Ventilation Hose Assembly Replacement and Powertrain Control Module Software Update
MOBILE REPAIR RECOMMENDATIONS
• Confirm with the customer a mobile repair is feasible.
• Check OASIS before going to the customer’s home or business to confirm if any other
outstanding FSA needs to be completed.
• Transportation – due to the simplicity of this repair, a specialty vehicle is not required.
MOBILE REPAIR ADDITIONAL INFORMATION
Please ensure the technician brings the following to the mobile repair destination:
• Printed Technical Instructions.
• Printed Repair/Work Order or any other necessary documentation as customer copy(s).
o Documents could also be emailed to the customer.
• Shirt/uniform and vehicle graphic with the dealership or Ford logos are recommended.
• Recommended tools and cleaning supplies:
o Standard Hand Tools.
MOBILE REPAIR QUESTIONS AND ASSISTANCE
Dealers participating in the Remote Experience Program:
• Refer to Electronic Field Communication - EFC12071 2023 Remote Experience Program.
MOBILE SERVICE REPAIR ASSESSMENT LEVEL
• All repairs in this program have the following assessment level.
- Light Mobile Service
OASIS ACTIVATION
OASIS will be activated on September 11, 2023.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on September
18, 2023. Owner names and addresses will be available by September 11, 2023.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this recall is a violation of law in several states, provinces, and countries. Accordingly,
you must limit the use of this listing to the follow-up necessary to complete this recall.
SOLD VEHICLES
• Only owners with affected vehicles that exhibit the covered condition will be directed to dealers
for repairs.
• Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle
inventory.
STOCK VEHICLES
•
Do not perform this program unless the affected vehicle exhibits the covered condition.
TITLE BRANDED / SALVAGED VEHICLES
Vehicles with canceled warranties are not eligible for this service action.
© Copyright 2023 Ford Motor Company
ATTACHMENT I
Page 2 of 3
Customer Satisfaction Program 23N01
Certain 2015-2019 Model Year Transit Vehicles with 3.2L Diesel Engine
Crankcase Ventilation Hose Assembly Replacement and Powertrain Control Module Software Update
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
The use of rental vehicles is not approved for this program.
PICK-UP AND DELIVERY
All customers affected by this program have the option of complimentary Vehicle Pick-up & Delivery
service (at participating dealers) in lieu of a rental vehicle. Refer to EFC12071, 2023 Remote
Experience Program, Pickup & Delivery (PDL) Offset section for additional details.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual –
Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances
for FSA’s / Related Damage.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is
required, although related damage must be on a separate repair line with the Related Damage
radio button checked.
o Ford vehicles – 3 years or 36,000 miles
CLAIMS PREPARATION AND SUBMISSION
• Note: All repairs for this program should be claimed using the claim entry direction below,
regardless if the vehicle is still under the New Vehicle Limited Warranty.
o Service Part Warranty (SPW) and/or Ford/Lincoln Loyalty Plans (ESP) eligible vehicles –
Claim repairs to FSA 23N01 if the vehicle is still within time and mileage limits.
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
▪ Claim type 31: Field Service Action
▪ Sub Code: 23N01
▪ Customer Concern Code (CCC): E29
▪ Condition Code (CC): 42.
▪ Causal Part Number: 6A664, Quantity 0
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
• Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with the same claim type and subcode as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
© Copyright 2023 Ford Motor Company
ATTACHMENT I
Page 3 of 3
Customer Satisfaction Program 23N01
Certain 2015-2019 Model Year Transit Vehicles with 3.2L Diesel Engine
Crankcase Ventilation Hose Assembly Replacement and Powertrain Control Module Software Update
•
Provision for Locally Obtained Supplies: Includes Electrical Tape, Motorcraft Uninsulated
Butt Connectors (22-16 AWG), Motorcraft Dual Wall and Adhesive-Lined Heat Shrinkable
Tubing (22-18 AWG) Submit on the same line as the repair.
• Program Code: 23N01
• Misc. Expense: OTHER
• Misc. Expense: Claim up to $10.00
© Copyright 2023 Ford Motor Company
ATTACHMENT II
Page 1 of 2
Customer Satisfaction Program 23N01
Certain 2015-2019 Model Year Transit Vehicles with 3.2L Diesel Engine
Crankcase Ventilation Hose Assembly Replacement and Powertrain Control Module Software Update
LABOR ALLOWANCES
Description
Labor Operation
Labor Time
23N01B
0.6 Hours
Replace Crankcase Ventilation Hose, cut and secure
Crankcase Ventilation wiring and program the PCM using
IDS release 129.03 or higher
PARTS REQUIREMENTS / ORDERING INFORMATION
Order
Quantity
Claim
Quantity
Crankcase Ventilation Hose (2015-2017MY)
1
1
Crankcase Ventilation Hose (2018-2019MY)
1
1
Part Number
Description
CK4Z-6A664-B
JK4Z-6A664-C
Splice Kit (18-22 gauge wire) (Kit can complete 2
1
.5
vehicles, return unused contents to part department)
Order your parts requirements through normal order processing channels. To guarantee the shortest
delivery time, an emergency order for parts must be placed.
3U2Z-14A088-AB
Obtain the parts below locally:
Part Number
Description
Obtain Locally
Wire Harness Tape
Quantity Needed
4 Vehicles per roll - Claim as
Misc. Other
DEALER PRICE
For the latest prices, refer to DOES II.
PARTS RETENTION, RETURN, & SCRAPPING
Follow the provisions of the Warranty and Policy Manual, Section 1 - WARRANTY PARTS
RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must
be scrapped by all applicable local, state, and federal environmental protection and hazardous
material regulations.
EXCESS STOCK RETURN
The excess stock returned for credit must have been purchased from Ford Customer Service Division
by Policy Procedure Bulletin 4000.
© Copyright 2023 Ford Motor Company
ATTACHMENT II
Page 2 of 2
Customer Satisfaction Program 23N01
Certain 2015-2019 Model Year Transit Vehicles with 3.2L Diesel Engine
Crankcase Ventilation Hose Assembly Replacement and Powertrain Control Module Software Update
REPLACED FSA PARTS INSPECTION AND SIGN OFF
Effective March 1st, 2021 all parts replaced as part of an FSA repair with a repair order open date of
March 1st, 2021, or later must be inspected and signed off on the repair order by a member of your
dealer fixed operations management team or an employee the task has been delegated to. If the task
is to be delegated to a non-management employee, the employee needs to be someone other than
the technician who completed the repair and needs to understand the importance of completing this
task consistently and accurately.
•
All parts replaced as part of an FSA repair should be returned to the parts department
following the Warranty Parts Retention and Return Policies.
•
Inspect the replaced parts to verify the FSA repair was completed.
•
If the FSA repair is found to be complete, the designated employee signs the repair order line
or parts return stamp area (electronic or hand signed) for the FSA repair indicating the parts
were inspected and validated to have been replaced.
•
After the parts have been inspected, they should be handled based on the guidance in the
parts status report in the Online Warranty System (Hold, Return, CORE, Scrap, etc.).
•
This process is subject to review during warranty audits for FSA repairs with a repair order
open date of March 1st, 2021, or later. Any eligible FSA claims requiring parts replacement
found not to have been inspected and signed off during a warranty audit will be subject to
chargeback and consideration for enrollment into the Dealer Incomplete Recall Repair
Process.
Note: Other approvals (electronic or handwritten) for add-on repair lines, dealer-owned vehicle
repairs, and repeat repairs do not qualify as FSA parts inspection approvals. The post-repair FSA
parts inspection process (electronic or handwritten) is independent of other warranty approval
requirements. The approval by the designated employee implies that the FSA parts were found to be
replaced and must be able to be identified on the Repair Order. If multiple FSAs require approval on a
single Repair Order, each applicable occurrence will require individual post-repair approval by the
designated employee.
© Copyright 2023 Ford Motor Company
Ford Motor Company
Ford Customer Service Division
P. O. Box 1904
Dearborn, Michigan 48121
Customer Satisfaction Program 23N01
Mr. John Sample
123 Main Street
Anywhere, USA 12345
September 2023
Your Vehicle Identification Number (VIN): 12345678901234567
At Ford Motor Company, we are committed not only to building high-quality, dependable products but
also to building a community of happy, satisfied customers. To demonstrate that commitment, we are
providing a Customer Satisfaction Program for your vehicle with the VIN shown above.
Why are you
receiving this notice?
Although your vehicle’s Crankcase Ventilation (CCV) hose system is likely
functioning fine, a sensor in your vehicle may incorrectly report that a hose
in the CCV system is disconnected. We are pleased to let you know that
Ford Motor Company is offering a one-time repair for this issue if the hose
assembly (which includes the sensor) requires replacement within certain
time and vehicle mile limitations.
What is the effect?
On your vehicle, the CCV monitor sensor may detect a disconnected hose
and the Malfunction Indicator Light (MIL) on your dashboard may illuminate
even though the CCV hose is still properly connected.
If required, this one-time repair of your vehicle’s CCV hose assembly is
available for a total of 11 years or 120,000 miles from the warranty start
date, whichever occurs first. If your vehicle has already exceeded either
time or mileage limits, this one-time repair offer will last until March 2024.
This program is automatically transferred to subsequent owners.
What will Ford and
your dealer do?
If your vehicle requires repair to the CCV hose assembly and your vehicle is
within the indicated time/mileage limitations, Ford Motor Company has
authorized your dealer to replace the existing CCV hose assembly free of
charge (parts and labor) with a new design that incorporates tamper-proof
connectors without a CCV monitor sensor. In addition, the unused sensor
wiring branch will be capped and stowed, and a new calibration will be
installed to accommodate the removed sensor. This is a one-time repair
program.
How long will it take?
If the component mentioned above requires replacement, the time needed
for this repair is less than one-half day. However, due to service scheduling
© Copyright 2023 Ford Motor Company
VEHICLE SALE NOTIFICATION FOR 23N01
If you no longer own this vehicle and do not know the current owner, no further action is required.
□ I no longer own this vehicle. Vehicle has been sold/transferred to:
Name
Address Number
Street
City
State
Zip
requirements, your dealer may need your vehicle for a longer period of time.
Additional time may be required to allow the engine to cool before
performing this repair.
What should you do?
Please keep this letter as a reminder of the one-time repair offer for your
CCV hose assembly. If the CCV hose assembly requires replacement, and
your vehicle is within the indicated time/mileage limitations of this offer, you
may provide the dealer with the VIN of your vehicle if you schedule a
service appointment for Customer Satisfaction Program 23N01. The VIN is
printed near your name at the beginning of this letter.
If you do not already have a servicing dealer, you can access
ford.com/support for dealer addresses, maps, and driving instructions.
NOTE: You can receive information about Recalls and Customer
Satisfaction Programs through our FordPass App. The app can be
downloaded through the App Store or Google Play. In addition, there are
other features such as reserving parking in certain locations and controlling
certain functions on your vehicle (lock or unlock doors, remote start) if it is
equipped to allow control.
What if you no longer
own this vehicle?
Please complete and detach the Vehicle Sale Notification at the bottom of
page one (1) and return it in the included prepaid envelope if you have sold
the vehicle.
You received this notice because government regulations require that
notification be sent to the last known owner of record. Our records are
based primarily on state registration and title data, which indicate that you
are the current owner.
Can we assist you
further?
If you have difficulties getting your vehicle repaired promptly and without
charge, please contact your dealership's Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our
Ford Customer Relationship Center at 1-866-436-7332 and one of our
representatives will be happy to assist you. If you wish to contact us through
the Internet, our address is ford.com/support.
For the hearing impaired, call 1-800-232-5952 (TDD). Representatives are
available Monday through Friday: 8:00 AM – 8:00 PM (Eastern Time).
FLEET OWNERS: If you have questions or concerns, please contact our
Ford Pro Contact Center at 1-800-34-FLEET, choose Option #1, and one
of our representatives will be happy to assist you. If you wish to contact us
through the Internet, our address is fleet.ford.com.
Representatives are available Monday through Friday: 7:00 AM – 11:00 PM
and Saturday 7:00 AM – 5:00 PM (Eastern Time).
As part of the Ford community, we appreciate your attention to this important matter and your
continued loyalty.
Ford Customer Service Division
This space intentionally left blank.
© Copyright 2023 Ford Motor Company
ATTACHMENT III
PAGE 1 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
CERTAIN 2015-2019 MODEL YEAR TRANSIT VEHICLES EQUIPPED WITH A
3.2L ENGINE — CCV HOSE REPLACE AND PCM SOFTWARE UPDATE
SERVICE PROCEDURE
1. Disconnect vacuum hose and clamps from Crankcase Ventilation (CCV) Hose. See Figure 1.
21630A
FIGURE 1
2. Disconnect electrical connector from CCV Hose sensor. See Figure 2.
STUD FOR
MISSING NUT
FIGURE 2
STUD
FOR
21630B
MISSING NUT
STUD FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
PLACE COPY HERE
ATTACHMENT III
PAGE 2 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
3. Disconnect harness from CCV heater. See Figure 3.
21630C
FIGURE 3
4. If equipped, remove wire for the Exhaust Gas Temperature (EGT) Sensor through clip on CCV tube.
See Figure 4.
CLIP
EGT SENSOR WIRE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
21630N
FIGURE 4
STUD FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
ATTACHMENT III
PAGE 3 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
5. Remove CCV hose from the vehicle. See Figure 5.
21630D
FIGURE 5
6. Detach harness from air intake tube and position so that the connector and wires will be easy to work 		
with. See Figure 6.
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
21630E
FIGURE 6
STUD FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
ATTACHMENT III
PAGE 4 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
7. Remove retainer from wire harness and cut off connector end. See Figure 7.
CCV HEATER
CONNECTOR
DO NOT REMOVE
FIGURE 7
21630F
8. Cut the wire covering back as shown in the highlighted area in Figure 8.
STUD FOR
MISSING NUT
21630G
FIGURE 8
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
ATTACHMENT III
PAGE 5 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
9. Add Dual Wall Heat Shrink to each individual wire. See Figure 9.
NOTE: Use pliers to gently squeeze the ends of the heat shrink sleeve (while heat shrink is still warm) to 		
		 ensure a tight fight and close any air gaps.
21630H
FIGURE 9
10. Fold wire back and secure wires with Coroplast tape. See Figure 10.
NOTE: Ensure that the tape completely covers the wires.
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
21630J
FIGURE 10
STUD FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
STUD FOR
ATTACHMENT III
PAGE 6 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
11. Route wire over air intake tube, secure into clamps, and plug connector back into CCV heater.
See Figure 11.
CLAMP
21630K
FIGURE 11
12. Connect new CCV tube and reattach vacuum line to new CCV tube. See Figure 12.
NOTE: There are indents on the new CCV hose where the vacuum line and clamps will reattach.
VACUUM LINE
AND CLAMPS
STUD FOR
MISSING NUT
NEW CCV TUBE
FIGURE 12
STUD FOR
MISSING NUT
21630L
STUD
FOR
MISSING NUT
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
STUD FOR
MISSING NUT
ATTACHMENT III
PAGE 7 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
13. If equipped, place wire for the Exhaust Gas Temperature (EGT) Sensor through clip on CCV tube.
See Figure 13.
CLIP
EGT SENSOR WIRE
21630N
FIGURE 13
14. Program the PCM following the module programming.
NOTE: You will be prompted during programming to answer whether or not the vehicle is equipped with 		
the new CCV hose without a sensor., Please make sure to select Yes. See Figure 14.
STUD FOR
MISSING NUT
SELECT YES
STUD FOR
MISSING NUT
STUD FOR
21630M
MISSING
NUT
FIGURE 14
PLACE COPY HERE
PLACE COPY HERE
PLACE COPY HERE
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
STUD FOR
MISSING NUT
ATTACHMENT III
PAGE 8 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
Module Programming
15. Connect a battery charger to the 12V battery.
NOTE: Verify that the negative cable of the charger is installed on a chassis or engine ground, and not
the 12 volt battery negative terminal to prevent the battery saver mode from activating on the
vehicle.
NOTE: If the diagnostic software does not load or if the vehicle cannot be identified properly, make sure 		
there is a good internet connection and the Vehicle Communication Module II (VCM II) is properly 		
connected to the Data Link Connector (DLC).
NOTE: Make sure the IDS computer does not enter sleep mode during programming.
16. Reprogram the Powertrain Control Module (PCM) using Integrated Diagnostic Software (IDS) release 		
129.03 or higher. Make sure you are connected to the Internet prior to reprogramming.
NOTE: Calibration files may also be obtained at www.motorcraftservice.com.
NOTE: Follow the IDS on-screen instructions to complete the reprogramming procedure.
17. Disconnect the battery charger from the 12V battery once the reprogramming has completed.
18. Check and clear codes.
Important Information for Module Programming
														
NOTE: When programming or reprogramming a module, use the following basic checks to ensure
programming completes without errors.
• Make sure the 12V battery is fully charged before carrying out the programming steps and 			
connect IDS/scan tool to a power source.
• Inspect Vehicle Communication Module (VCM) and cables for any damage. Make sure scan tool
connections are not interrupted during programming.
• A hardwired connection is strongly recommended.
• Turn off all unnecessary accessories (radio, heated/cooled seats, headlamps, interior lamps, HVAC
system, etc.) and close doors.
• Disconnect/depower any aftermarket accessories (remote start, alarm, power inverter, CB radio,
etc.).
• Follow all scan tool on-screen instructions carefully.
• Disable IDS/scan tool sleep mode, screensaver, hibernation modes.						
• Create all sessions Key ON Engine OFF (KOEO). Starting the vehicle before creating a session will 		
cause errors within the programming inhale process.
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
ATTACHMENT III
PAGE 9 OF 9
CUSTOMER SATISFACTION PROGRAM 23N01
Recovering a module when programming has resulted in a blank module:
NEVER DELETE THE ORIGINAL SESSION!
a. Obtain the original IDS that was used when the programming error occurred during Module
Reprogramming (MR) or Programmable Module Installation (PMI).
b. Disconnect the VCM from the Data Link Connector (DLC) and the IDS.
c. Reconnect the VCM to IDS and then connect to the DLC. Once reconnected, the VCM icon should
appear in the corner of the IDS screen. If it does not, troubleshoot the IDS to VCM connection.
		
d. Locate the original vehicle session when programming failed. This should be the last session used
in most cases. If not, use the session created on the date that the programming failed.
NOTE: If the original session is not listed in the previous session list, click the Recycle Bin icon at the 		
lower right of the previous session screen. This loads any deleted sessions and allows you to 		
look through them. Double-click the session to restore it.
e. Once the session is loaded, the failed process should resume automatically.
f. If programming does not resume automatically, proceed to the Module Programming menu and select
the previously attempted process, PMI or MR.
g. Follow all on-screen prompts/instructions.
h. The last screen on the IDS may list additional steps required to complete the programming process.
Make sure all applicable steps listed on the screen are followed in order.
IMPORTANT NOTE: Federal law prohibits selling motor vehicle parts or components that are
under safety, compliance, or emissions recall. Unless a part is requested to be returned to Ford,
all parts replaced under this FSA must be scrapped in accordance with all applicable local, state
and federal environmental protection and hazardous material regulations. Refer to the Parts
Retention, Return, & Scrapping section of the FSA dealer bulletin for further information.
CPR © 2023 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2023
Attachment IV
Page 1 of 2
Customer Satisfaction Program 23N01
Certain 2015-2019 Model Year Transit Vehicles with 3.2L Diesel Engine
Crankcase Ventilation Hose Assembly Replacement and Powertrain Control Module Software
Update
Mobile Service Repair Assessment
The following assessment will be used to indicate how mobile friendly a program is.
Dealer Bulletin
This system may be broken down by labor operations or models. If the program has an
inspection followed by a potential repair, then the assessment level will be broken down into an
inspection assessment level and a repair assessment level to show the mobile friendliness of
the repair on the vehicle. If the program has multiple repair options (determined by model,
model year or options) then the assessment level will also be determined by the options to show
the mobile friendliness of the repair on the vehicle.
Assessment Levels
- Mobile Reprogramming
- Light Mobile Service
- Enhanced Mobile Service
- Advanced Mobile Service
- Wheel and Tire Mobile Service
- Not Mobile Service Capable
Description of each level that is used to determine the overall assessment.
– Mobile Reprogramming
• Module Programming or similar type services
• Minimum tools maybe required other than an IDS/FDRS setup
• FDRS programming that requires internet connection (wi-fi or mobile hotspot)
• Make sure vehicle has a charge port to ensure battery voltage is maintained during
flashing of the module(s)
• Repairs not greater than 1 hour in length (including time to wait for programming)
Note: The location will need a charging station or wall box to maintain the 12-volt battery.
•
•
•
•
– Light Mobile Service
Interior repair procedures that do not require seat, dash, or headliner removal
Under hood repairs that do not require large component removal
Exterior repairs that do not require large component/panel removal
Repairs may require standard hand tools (Access to a Technician starter kit or similar)
Attachment IV
Page 2 of 2
Customer Satisfaction Program 23N01
Certain 2015-2019 Model Year Transit Vehicles with 3.2L Diesel Engine
Crankcase Ventilation Hose Assembly Replacement and Powertrain Control Module Software
Update
– Enhanced Mobile Service
Anytime a procedure requires work under the vehicle to have a two-person
process
• Brake Inspection and Brake Repair/Replacement
• Limited Suspension Component replacement (no alignment)
• Under Vehicle access for limited repairs (no large component removal)
• Vehicle Check Up - VCU
• Pre-Delivery Inspection - PDI
• Used Car Inspection/Presale Inspection
• May require floor jack, jack stands, and impact tools
Note: Wheel lock maybe required.
•
•
•
•
– Advanced Mobile Service
Fluid Exchange/Oil Change
Light Repairs
Brake Hydraulic Repairs
– Wheel and Tire Mobile Service
• Tire Removal from Wheel
• Tire Balancing
• Tire Repair
Note: Specialized Mobile Service unit and equipment including Tire balancer and Tire
Changer required.
– Not Mobile Service Repair Capable
• Large component removal
• BEV Battery Replacement
• Requires a vehicle hoist – to complete the repair (more than inspection)
• Required vehicle alignment
• Requires significant vehicle disassembly
• Repairs greater than 2-3 hours
• Any repairs that require M-Time
• Includes a service procedure where the vehicle owner may be distressed about the state
of their vehicle