DetailA

PERFECT DELIVERY INSPECTION (PDI)
2015
All Vehicles
Audi Vehicle Detail Report
Stock No.
Dealer Number
VIN
Model
R.O. No.
WARNING: DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery.
Refer to TSB 2009967 for Detailer responsibilities, specific use of
chemicals, and for part numbers to order materials.
Exterior – Prior to Delivery (continued)
WARNING: Only operate power convertible top with engine
running to conserve battery power (A5/S5 Cab, R8 ONLY)
Under Hood – Prior to Delivery
WARNING: DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5
minutes. This will cause the top to stop functioning and will
require service (A5/S5 Cab, R8 ONLY)
WARNING: DO NOT treat vehicle parts painted with matte finish
paint using polishing materials or hard wax.
NEVER use protective wax. It can destroy the matte finish
effect. Only use a microfiber cloth for cleaning (R8 ONLY)
Exterior – Prior to Delivery
 Remove protective covering
*WARNING: For A3 ONLY - Soak full body cover with water
before removal (see TSB 2037319 for details)
 Wash/Dry vehicle exterior including inside door jambs and
under trunk
 Inspect painted surfaces/molding/glass and remove any residue
 Inspect body for paint defects and damage
 Check interior floors, sunroof, trunk, front and rear windshield,
and all windows for water leaks
 Apply either 3M™ Performance Finish Wax or 3M™ Perfect-It™
Show Car Paste Wax to wax the vehicle (3M™ Perfect-It™ Show
Car Paste Wax ONLY on R8 and DO NOT USE ON MATTE PAINT
FINISH)
 Clean front and rear windshield using 3MTM Glass Polishing
Compound. Refer to TSB 2020552 for details
 Apply 3M Performance Finish wax to the wheels (except
chrome wheels) to protect rims from brake dust
 Ensure tire pressure is set to Normal Load Condition prior to
delivery. SEE/PRINT TABLE FROM SERVICENET.
WARNING: DO NOT TOUCH ORANGE HIGH VOLTAGE WIRES
(Q5 hybrid only)
 Wipe down engine compartment and remove excess water
from grille and hood area.
IMPORTANT: DO NOT use dressings or chemicals containing
silicone!
Interior – Prior to Delivery
 Clean all glass/sunroof (if equipped/interior rear view mirror
and visor mirrors)
 Remove all trim protection/coverings/stickers/decals
WARNING! Do not remove airbag warning triangle/warning
labels
 Check upholstery/clean as required
 Check for excessive grease on seat tracks/clean as required
 Check all interior surfaces/compartments (including sun visors/
headliner) for marks or fingerprints. Clean as required
 Vacuum carpet
 Check luggage compartment and vacuum
 Install front/rear floor mats (including locking clip/tabs if
applicable)/check that color matches
Final Detail Quality Inspection
 Re-inspect vehicle for surface scratches, swirl marks, paint
chips, dents, wax residue, dust, or lint, preferably in an area
where vehicle is to be delivered. If this is not possible, inspect
vehicle in shop under fluorescent lights or in bright sunlight
Detailer
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Detailer Signature
Effective 5-28-2014-US
Version 1.1
Completion Date
1 of 1