TSB_TRA072_R5
Service Bulletin Details
Public Details for: TSB_TRA072_R5
Technical service bulletin: service action: inhibitor switch replacement (sa317b/c) - this bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. T
Models from 2017
2017 KIA FORTE |
2017 KIA OPTIMA |
2017 KIA OPTIMA HYBRID |
2017 KIA OPTIMA PHEV |
2017 KIA SEDONA |
2017 KIA SORENTO |
2017 KIA SPORTAGE |
Models from 2016
2016 KIA OPTIMA |
GROUP TRA MODEL 2017MY Multiple Models 2016-2017MY Optima (JF) DATE December 2017 NUMBER 072 (Rev 5, 11/09/2023) TECHNICAL SERVICE BULLETIN SERVICE ACTION: INHIBITOR SWITCH REPLACEMENT (SA317B/C) SUBJECT: NOTICE This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed below. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units. Follow the procedure outlined in this bulletin to replace the inhibitor switch. Before conducting the procedure, verify that the vehicle is included in the list of affected VINs. Symptoms: ▪ Malfunction Indicator Lamp (MIL) ON with DTC P0705 - Transmission Range Sensor (TRS) Circuit Malfunction (active or history) ▪ CAN-related DTCs (For both Hybrids: CAN DTC C2243) ▪ Intermittent no crank/no start ▪ Erratic or harsh shifting ▪ EPB and Hold lights illuminated intermittently ▪ “Key OFF” indicated after placing the selector lever into the ‘P’ position and depressing the Start/Stop button Note: When this condition occurs, the ‘P’ position is not indicated on the instrument cluster. Model Optima (JFa) Sorento (UMa) Optima Hybrid (JF HEV) Optima Plug-in Hybrid (JF PHEV) Sportage (QL) Forte (YD) Sedona (YP) Optima (JF) Production Date August 29, 2016 through June 15, 2017 June 27, 2016 through April 4, 2017 June 7, 2016 through March 6, 2017 June 28, 2016 through March 7, 2017 June 8, 2016 through March 3, 2017 July 4, 2016 through February 28, 2017 File Under:Circulate To: X General Manager X Service Advisors X Technicians X Service Manager X Parts Manager X Body Shop Manager X Fleet Repair Page 2 of 3 SUBJECT: SERVICE ACTION: INHIBITOR SWITCH REPLACEMENT (SA317B/C) NOTICE For Optima models included in this TSB: VINs that start with 5XX are designated Optima (JFa) and produced in the United States. VINs that start with KNA are designated Optima (JF/JF HEV/JF PHEV) are produced in South Korea. NOTICE A Service Action is a repair program without customer notification that is performed during the warranty period. Any dealer requesting to perform this repair outside the warranty period will require DPSM approval. Repair status for a VIN is provided on KDealer+ (Service → Warranty Coverage → Warranty Coverage Inquiry → Campaign Information). Not completed Recall / Service Action reports are available on KDealer+ (Consumer Affairs → Not Completed Recall → Recall VIN → Select Report), which includes a list of affected vehicles. This issue number is SA317B/C. Replacement Procedure: 1. Replace the inhibitor switch by referring to the “Automatic Transaxle System → Automatic Transaxle Control System → Inhibitor Switch → Repair procedures” chapter of the applicable Shop Manual on KGIS. 2. Clear any related DTCs if necessary. 3. Confirm proper operation of vehicle. TSB: SA317B/C (Rev 5) Multiple Models December 2017 Page 3 of 3 SUBJECT: SERVICE ACTION: INHIBITOR SWITCH REPLACEMENT (SA317B/C) AFFECTED VEHICLE RANGE: Model Production Date Range Optima (JFa) August 29, 2016 through June 15, 2017 Sorento (UMa) Optima Hybrid (JF HEV) June 27, 2016 through April 4, 2017 Optima Plug-in Hybrid (JF PHEV) Sportage (QL) June 7, 2016 through March 6, 2017 Forte (YD) June 28, 2016 through March 7, 2017 Sedona (YP) June 8, 2016 through March 3, 2017 Optima (JF) July 4, 2016 through February 28, 2017 REQUIRED PART: Part Name Part Number Figure Inhibitor Switch 42700 3B710QQK or 42700 26700 Note: If P/N 42700 3B710QQK is unavailable, please order P/N 42700 26700. DO NOT order both part numbers for a single repair. WARRANTY INFORMATION: N Code: N99 C Code: C99 Model Claim Causal Type P/N Qty. Repair Labor Op Op Replacement Description Code Time P/N (SA317B) Inhibitor Switch 170128R1 Replacement (SA317C) Jfa Inhibitor Switch 170A63R2 Replacement (SA317C) 42700 Uma V 0 Inhibitor Switch 170A63R3 3B700 Replacement (SA317C) JF HEV, Inhibitor Switch 170133R4 PHEV Replacement (SA317C) QL, YD, Inhibitor Switch 170128R5 YP Replacement Note: As of 10/20/2023, P/N 42700 3B710QQK will be superseded by Qty. JF 0.4 M/H 42700 3B710QQK or 42700 26700 1 1.4 M/H 0.4 M/H P/N 42700 26700. If P/N 42700 3B710QQK is unavailable, please order P/N 42700 26700. All claims are subject to review and chargeback. NOTICE VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA317B/C when accessing the KDealer+ system. TSB: SA317B/C (Rev 5) Multiple Models December 2017