A0123922071318_4

Service Bulletin Details

Public Details for: A0123922071318_4

This bulletin provides information for when the mil is on, and a whistling noise is heard with dtc P2ADF00.


- 2023 - 2022 - 2021 - 2020 - 2019 -

Models from 2019
2019 AUDI A8
Technical Service Bulletin
01 MIL on, Whistling noise, leaking air Bank 2 - DTC P2ADF00, Engine Crankcase breather
01 23 92 2071318/4 November 6, 2023. Supersedes Technical Service Bulletin Group 01 number 23-87 dated
October 23, 2023, for reasons listed below.
Model(s)
Year
A8
2019 – 2021
S8
2020 – 2022
SQ7, SQ8, and
RS Q8
2020 – 2023
RS 6 Avant, and
RS 7
2021 - 2023
VIN Range
Vehicle-Specific Equipment
All
4.0l engine
Condition
REVISION HISTORY
Revision
Date
Purpose
4
-
Revised Warranty (Updated Labor Operations)
3
10/23/2023
Revised Warranty (Updated Labor Operations)
2
09/20/2023
Revised Warranty (Updated Service Number and Damage Code)
Customer states:
• The MIL or Exhaust warning light is ON.
• A whistling noise may be heard from the engine compartment.
Workshop findings:
The following DTCs are stored in the engine control module ECM, -J623- (address word 0001):
• DTC P2ADF00 Intake Air System Leak Bank 2 (must be stored).
• DTC P227900 Intake Air System Leak Bank 1 may be stored, if so please also perform service solution in TSB
2069351.
DTCs pertaining to misfires on Bank 1 may also be stored.
Technical Background
Not applicable.
© 2023 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Production Solution
Not applicable.
Service
In this case, replace the full load breather line for cylinder bank 2.
1. Do not replace the oil separator for bank 1 or bank 2 or the part load breather lines.
a. Please refer to image of the crankcase from the Self Study Program 920493 as a guide.
• Item 1: Non-return valve
• Item 2: Oil separator for bank 1
• Item 3 Part load breather line for bank 1
• Item 4: Full load breather line for bank 1
• Item 5: Oil separator for bank 2
• Item 6: Non-return valve (Not applicable for engine codes CWWB, and DWKA, because Non-return valve is
integrated into the intake manifold)
• Item 7: Full load breather line for bank 2
• Item 8: Part load breather line
© 2023 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
• 110 Up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
1051
Damage Code:
0050
Labor Operations:
Remove and install crankcase breather
hose
1052 1923
See SRT with
associated
operations
Diagnostic Time:
GFF
0150 0000
See SRT with
associated
operations (Max 25
TU)
Road test prior to the service procedure
0121 0002
10 TU
Road test after the service procedure
0121 0004
10 TU
As per TSB 2071318/3
Claim Comment:
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Tool Number
Tool Description
VAS 6160/VAS 6150
VAS tester with the current version of ODIS (Windows 10)
Additional Information
All parts and service references provided in this TSB (2071318) are subject to change and/or removal.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
© 2023 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.