A0123962071263_4

Service Bulletin Details

Public Details for: A0123962071263_4

This bulletin provides information for when the mil is illuminated with cylinder 1 or 6 misfires; P03000, P030100, P030600.


- 2023 - 2022 - 2021 -

Technical Service Bulletin
01 MIL on - 4.0TFSI Cylinder 1 or 6 Misfires - RS6 or RS7 - P03000, P030100, P030600
01 23 96 2071263/4 November 17, 2023. Supersedes Technical Service Bulletin Group 01 number 23-76 dated
August 31, 2023 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
RS 6 Avant, and
RS 7
2021 – 2023
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
4
-
Revised header (Added MY 21 and MY23)
Revised Service (Added SVM Codes)
3
08/31/2023
Revised Warranty (Updated Service number)
2
08/30/2023
Revised Warranty (Updated claim types)
Customer states:
• MIL on or exhaust emissions warning light flashes or is intermittently illuminated.
• No noticeable differences in performance are noted while the MIL/ exhaust emissions warning is illuminated.
• The “Start System: Fault” may also appear in the instrument cluster.
Workshop findings:
The following DTCs with specified ambient conditions must be stored in the ECM, J623, (address word 0001):
• P030000 (Misfire detected)
• P030100 (Cylinder 1 Misfire detected)
• P030600 (Cylinder 6 Misfire detected)
Ambient Conditions
• Engine speed below 1900 RPM
• Normed load value: less than 20%
• Engine oil temperature: below 75° C
If misfires for other cylinders or the ambient conditions outside the scope mentioned above are stored
in the ECM, J623, (address word 0001), please continue with normal diagnosis process.
© 2023 Audi of America, Inc.
Internal
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Technical Background
The ECM software has been optimized.
Production Solution
Not applicable.
Service
SVM Update instructions:
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if
necessary:
Model
Old Software
Number
Old Software
Version
New Software
Number
New Software
Version
(or higher)
(or higher)
MY21 RS 6
and RS 7
4K0907557F
0001-0002
4K0907557F
0003
MY22 RS 6
and RS 7
4K0907557G
0001-0002
4K0907557G
0003
MY23 RS 6
and RS 7
4K0907557H
0001
4K0907557H
0002
SVM Code
Input
01A297
Warranty
Claim Type:
• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for
DTCs)
© 2023 Audi of America, Inc.
Internal
0151 0000
Time stated on
the diagnostic
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
protocol
(Max 50 TU)
Diagnostic Time:
GFF
0150 0000
Max 10 TU
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
0121 0004
10 TU
Claim Comment:
As per TSB 2071263/4
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Tool Number
Tool Description
VAS 6160/VAS 6150
VAS tester with the current version of ODIS (Windows 10)
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732: 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2071263) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
© 2023 Audi of America, Inc.
Internal
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.