TSB-23-51-003

SUBJECT:
REMOVAL & INSTALLATION PROCEDURE FOR
FRONT & REAR PROTECTOR ON SIDE GUARD
MOLDING – SERVICE MANUAL REVISION
No:
TSB-23-51-003
DATE:
November 2023
MODEL:
See below
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ X ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
This TSB provides updated information for the removal and installation of the Front & Rear
Protector on the Side Guard Molding in the applicable Service Manual section.
AFFECTED VEHICLES
2023-2024 Outlander
2023-2024 Outlander Plug-in Hybrid
AFFECTED SERVICE MANUAL
• 2023-2024 Outlander Service Manual
• 2023-2024 Outlander Plug-in Hybrid Service Manual
PROCEDURE
Please use the following chart as a guide to replace the indicated page in the affected Service
Manuals, Group 51, Body Exterior, Doors, Roof & Vehicle Security, Exterior, Removal and
Installation, Side Guard Molding, Removal and Installation.
Applicable Manual
2023
OUTLANDER
Service Manual
2024
OUTLANDER
Service Manual
2023 OUTLANDER
(Plug-in Hybrid)
Service Manual
2024 OUTLANDER
(Plug-in Hybrid)
Service Manual
Pub.No.
MSCD-030B-2023
(Volume 3)
MSCD-030B-2024
(Volume 3)
Applicable Title
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
└ EXTERIOR
└ REMOVAL AND INSTALLATION
└ SIDE GUARD MOLDING
└ REMOVAL AND INSTALLATION
Contents
Attached
sheet 2
MSCD-027B-2023
MSCD-027B-2024
Copyright 2023, Mitsubishi Motors North America, Inc.
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi
Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
11/16/2023
1 of 3
(5361/MSB23M51001)
EXTERIOR
Attached sheet 2(1/2)
REMOVAL AND INSTALLATION
SIDE GUARD MOLDING
REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION
 
Section A – A
2
A
Clip
A
1
1, 2
BCKA0213AA
Removal steps
11/16/2023
1.
Front side guard molding
2.
Rear side guard molding
2 of 3
(5361/MSB23M51001)
Attached sheet 2(2/2)
EXTERIOR


3
B
1
B
B
B
A
A
A
4
A
Section B - B
Section A - A
Grommet
2
Screw
Clip
DF4004BH3AA
1, 3
1, 3
2, 4
DF4004BH4AA
2, 4
DF4004BH5AA
DF4004I7AB
Removal steps
11/16/2023
1.
Front protector
2.
Front side guard molding
3.
Rear protector
4.
Rear side guard molding
3 of 3
(5361/MSB23M51001)