PIT5165B
Service Bulletin Details
Public Details for: PIT5165B
Replacing power steering cooler.
- 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2015
| 2015 BUICK ENCLAVE |
| 2015 CHEVROLET TRAVERSE |
Models from 2014
| 2014 BUICK ENCLAVE |
| 2014 CHEVROLET TRAVERSE |
Models from 2013
| 2013 BUICK ENCLAVE |
| 2013 CHEVROLET TRAVERSE |
Models from 2012
| 2012 BUICK ENCLAVE |
| 2012 CHEVROLET TRAVERSE |
Models from 2011
| 2011 BUICK ENCLAVE |
| 2011 CHEVROLET TRAVERSE |
Models from 2007
| 2007 SATURN OUTLOOK |
File in Section: Service Bulletin Bulletin No.: Date: PIT5165B December, 2014 PRELIMINARY INFORMATION Subject: Replacing Power Steering Cooler Models: 2008 - 2015 Buick Enclave 2009 - 2015 Chevrolet Traverse 2007 - 2015 GMC Acadia 2007 - 2010 Saturn Outlook This PI was superseded to update Model Years. Please discard PIT5165A. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. When replacing a power steering cooler, perform the following steps to minimize the potential of introducing air into the system: 1. Block off the hoses near the cooler connection with appropriate clamps. 2. Disconnect the cooler from the lines and remove the cooler. 3. Prefill the new cooler on the bench and cap off the pre-filled cooler ends for installation 4. Install the new pre-filled cooler on the vehicle and remove the clamps on the hoses. 5. Follow the Power Steering System Bleed Procedure in service information. Warranty Information For vehicles repaired under warranty use: Labor Operation E8940 Description Labor Time Power Steering Fluid Cooler Replacement Use Published Labor Operation Time Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.