MAS003715
Service Bulletin Details
Public Details for: MAS003715
Rapid update 585 to replace both rear axle shafts for the improvement of the component, guaranteeing better performace and a longer lifespan.
Models from 2024
2024 MASERATI MC20 |
Models from 2023
2023 MASERATI MC20 |
2023 MASERATI MC20 CIELO |
Models from 2022
2022 MASERATI MC20 |
TECHNICAL SERVICE OPERATIONS MAS003715_A RU 23-64 RAPID UPDATE FROM: Maserati TSO TO: Maserati Network Rapid Update 585 MC20 – Rear axle shaft replacement ATTENTION! This document replaces MAS003715 RU 23-45. Please discard any paper copy of the previous bulletin DATE: NOVEMBER 14 2023 Certain Maserati MC20 and MC20 Cielo (M240) MY22 MY23 listed in MODISCS+ are involved in a Rapid Update to replace both rear axle shafts. This replacement is necessary because the development of the project has led to an improvement of the component, guaranteeing better performance and a longer lifespan. Therefore, to offer our customers the best available technology, it has been decided to replace and update the vehicles that have already been sold. We remind you that all the Rapid Updates must be performed within the first workshop visit, regardless of the Mandatory setting set in Modis, as required by Maserati policies. Also, for vehicles in Stock Dealer / PDI, it is necessary to carry out all action operations before delivery to the end customer, as required by the White Book and explicitly reported in the Predelivery checklist. Please read and review this bulletin first before ordering parts and/or starting the procedure. Contact your Regional AfterSales Manager (RAM) or the Technical Support Helpdesk if you have any questions. ([email protected]) Thank You for your continued support and cooperation. Maserati Americas Aftersales Dept. © 2023 Maserati Americas Aftersales www.maseratiusa.com MAS003715_A All rights reserved. Reproduction or translation in whole or in part is not permitted without authorization from the publisher. Printed in USA 1 Technical Procedure TECHNICAL SERVICE OPERATIONS All images shown in this bulletin are for illustrative purposes only 1. Always check ModisCS+ to see if the vehicle is involved in this action and if it has not been previously performed. 2. Disconnect the battery by following the relative procedure in the workshop manual: ▪ 8.20.001.0 BATTERY Disconnect-Connect Power Supply 3. Completely remove and replace the left and right drive shafts following the instructions in the workshop manual. (Section 03.10 - 1 GEARBOX HOUSINGS) ▪ ▪ 03.21.002 - COMPLETE RH HALF SHAFT - Removal/refitting or replacement 03.21.003 - COMPLETE LH HALF SHAFT - Removal/refitting or replacement NOTE: Please visually inspect the inner shaft boot at the differential joint and its caps for any presence of grease and or torn boot. Be sure to clean all cap holes and surfaces from any residual grease. Remember to always replace removed screws with new ones per the workshop manual. • 06.20.007 - RH REAR HUB CARRIER - Removal/refitting or replacement NOTE: during the disassembly procedure, if broken screws are found or the threads on the gearbox flange are damaged open a BOL report as “Support Request” for assistance. 4. Use a Torque Wrench: Follow the workshop manual instructions! Tighten/torque ALL screws following the sequence: Tightening torque of the axle shaft screws - 03.10.145 30N ⋅m 1. TIGHTENING TORQUE (22.1 ft-lb) 90° 2. ANGLE (1.57 rads) 45N ⋅m 3. CONTROL TORQUE (33.2 ft-lb) 5. Perform a vehicle alignment. ▪ 06.90.000 - COMPLETE CAR SET-UP - Adjustments 6. Carry out functional tests. 7. Procedure complete. © 2023 Maserati Americas Aftersales www.maseratiusa.com MAS003715_A All rights reserved. Reproduction or translation in whole or in part is not permitted without authorization from the publisher. Printed in USA 2 TECHNICAL SERVICE OPERATIONS Spare Parts Order the following PNs. Spare parts PN QTY REAR DRIVE SHAFT KIT* 673015581 1 REAR DRIVE SHAFT SCREWS 670295832 12 Axle Shaft Nut 675000138 2 Hub to REAR SWINGING ARM & AXLE ROD Nuts 675001188 4 Hub to REAR UPPER LEVER Nut 675001194 2 Hub to REAR TOE-IN ADJUSTMENT ROD Nut 675001193 2 *Please order only one kit per vehicle. Each kit includes both shafts (qty 2 total). Warranty claim Complete the warranty claim as follows: Description Code Rapid Update Number 585 Guarantee code 23 Error code 063 Component Code 03.21.002 Operation Code ▪ Rework © 2023 Maserati Americas Aftersales www.maseratiusa.com MAS003715_A 03.21.002.A (4.60 h) All rights reserved. Reproduction or translation in whole or in part is not permitted without authorization from the publisher. Printed in USA 3