TSB23-540-001
Service Bulletin Details
Public Details for: TSB23-540-001
This service bulletin is about certain vehicles equipped with 92 inch or longer roof mounted light bars that could experience fracture of the light bar mounting brackets, as well as provides instructions to replace the light bar bracket wit
- 2024 - 2023 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 -
Models from 2024
2024 SPARTAN K1 |
2024 SPARTAN K2 |
2024 SPARTAN K3 |
2024 SPARTAN K4 |
2024 SPARTAN FIRE FC-94 |
2024 SPARTAN FIRE GLADIATOR |
2024 SPARTAN FIRE METROSTAR |
Models from 2023
Models from 2022
Models from 2021
Models from 2020
Models from 2019
Models from 2018
Models from 2017
Models from 2016
Models from 2015
Models from 2014
Spartan Fire, LLC DATE: APPLIES TO: Technical Service Bulletin TSB23-540-001 12/21/2023 This service bulletin applies to certain 2014 through 2024 model year, Gladiator, Metro Star, and KME Panther model emergency response chassis cabs built between October 9, 2014 and September 27, 2023. CONDITION: Certain vehicles equipped with 92 inch or longer roof mounted light bars could experience fracture of the light bar mounting brackets. CORRECTION: Replace light bar bracket with improved design bracket. LABOR ALLOCATION: 1 hour CLASSIFICATION: T3 PARTS NEEDED: QTY 2 Part Number 4861-GG2-001 Description Light bar bracket Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. 23019 Page 1 of 2 QUA-FR-0290 Rev: 4.0 Spartan Fire, LLC Technical Service Bulletin TSB23-540-001 GENERAL INSTRUCTIONS: Thoroughly review entire service bulletin before starting work. If there are questions or concerns with steps defined in this service bulletin, contact Spartan Fire, LLC. Customer & Product Support Group. All applicable industry safety standards must be followed when performing work identified in this procedure. Step By Step Instructions 1) Locate light bar bracket on cab roof as shown in figure 2.1. Figure 2.1 2) 3) 4) 5) 6) Support light bar so bracket circled above can be removed from both sides. Remove brackets one at a time. Install new bracket part number 4861-GG2-001 on each side. Tighten fasteners appropriately. Repair is complete. Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. 23019 Page 2 of 2 QUA-FR-0290 Rev: 4.0