ReportB

PERFECT DELIVERY INSPECTION (PDI)
2014
TT/TTS Coupe and Roadster/TT RS
Audi Technician Report
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
All items must be completed prior to customer delivery by an Audi
technician
**Refer to the Special functions tab of ODIS Diagnosis using GFF
for the PDI function tests
**Audi recommends using an Audi approved battery charger to
prevent excessive battery discharge during inspection
Open Campaigns/Updates
Exterior
FF     Test windshield washers for aim and function
FF     Turn on headlights and test headlamp washers (if equipped)
FF     Test exterior lighting functions
FF     Check key functionality: Including seat memory (if applicable);
verify vehicle starts and runs with all keys; verify all doors
manually and remotely lock and unlock with all keys
FF     Check Elsa for open campaigns and updates. Perform
campaigns not requiring SVM if applicable. Campaigns
requiring SVM should only be performed after the vehicle has
been taken out of transport mode.
Interior
Battery Inspection
FF     Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting
FF     Check battery clamps for proper torque. Re-torque if required
FF     Verify operation of all interior lights
FF     Install the headlight washer fuse
FF     Mirrors: Inspect folding, adjustments, RH tilt in reverse, and
memory (if equipped)
FF     Check the battery prior to starting engine with MCR340A.
Record MCR340A code: _________________ or attach printout
FF     Check operation of all switches: Locks, windows, seat adjustment, and child safety features
FF     Inspect operation of lighter, aux. outlet under armrest and rear
outlet
Transport Mode Deactivation, DTC check, set service reminder
FF     Verify operation of all front and rear seat belts and latches
FF     Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating )
FF     Check horn operation
FF     Set service reminder (via Special functions –> Service work –>
17-PDI-resetting SRI at PDI, counter reset, etc.)
FF     Passenger side airbag: Verify operation of Passenger Occupant
Detection System
FF     Deactivate the anti-theft function for the Navigation DVD using
the Scan Tool. Follow the process outlined in TSB 2013790
Radio
FF     Perform an SVM specified /actual comparison (via Special
functions ->Software Version Management (SVM))
FF     Verify operation of AMI or aux. input
FF     Verify operation of CD changer (if equipped)
FF     Perform any campaign update requiring SVM at this time
(follow instructions listed in campaign documentation)
FF     SD card slot: Insert SD card and test function (Test all SD card
slots as equipped)
Under the Hood Fluid Check and Inspection
Audi Navigation plus (if equipped)
FF     Check all fluid levels and top off if necessary
FF     Verify and set Language and Measurement Units in Setup/
Settings menu
FF     Check engine oil level – fill oil to the max level when the vehicle
is at operating temperature
Trunk Inspection
FF     Verify emergency repair tools are installed securely in trunk
tool kit
FF     Set clock and date to local time/date using correct format
FF     Navigation location: Set dealership location (for following back
to dealership during road test)
FF     Voice Activation (if equipped): Press the “Talk” button and
verify several commands
FF     Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
Effective 10-1-2013
Version 1.0
1 of 2
PERFECT DELIVERY INSPECTION (PDI)
2014 TT/TTS Coupe and Roadster/TT RS | Audi Technician Report
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
On-Hoist Inspection
Road Test (continued)
FF     Check underside of vehicle for fluid leaks and loose components
FF     Verify rear spoiler functionality
FF     Check steering, boots, brake system, hoses, tires and wheels
for damage
FF     Climate control: Check all functions and verify proper A/C cooling
FF     Remove suspension blocks (if installed)
FF     Front seat heating (if equipped): Inspect for proper operation
FF     Inspect wheel bolts for proper torque using torque wrench
FF     Navigation function (if equipped): Activate NAV and follow
directions back to dealership
FF     Install wheel bolt covers and center caps as supplied
FF     Parking brake: Apply and verify hold and release
Road Test
Post-Road Test Inspection
FF     Check for squeaks, rattles, and wind noise
FF     Interrogate fault memory using the Scan Tool and print
Diagnostic Log
FF     Test operation of folding power top (Roadster)
FF     Test power wind deflector (Roadster)
FF     Verify function of Audi parking system rear
FF     Verify engine performance and acceleration
FF     Verify transmission operation including shift paddles
FF     Record final mileage on checklist and sign checklist
FF     Ensure the yellow tire pressure tag is installed on steering
wheel
FF     Check steering/tire alignment
If Vehicle is for Showroom Display/Inventory Storage or Demo
Use:
FF     Test drive vehicle applying brakes several times (at least 4
times) at 20 mph (35 km/h) to clean brake rotors. Check for
abnormal noise/vibration/pulsation
FF     Install showroom charger to ensure battery remains charged at
all times
FF     Verify quality of radio reception in AM/FM/SAT bands
FF     Cruise control verify all functions
FF     Apply Inventory Maintenance Sticker
FF     Install standard wiper blades (if not already installed)
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 10-1-2013
Version 1.0
Completion Date
2 of 2