TD-23-06

Document # TD-23-06
Document Title:
Overhead Slide-Out Cabinet Bracket Installation (26RB/26MRB)
Document Type:
Technical Document
Make and Model:
Ember Touring 26RB
and 26MRB
Document #:
23-07
Model Year:
2023
Revision Date:
December 15, 2023
Flat Rate:
Code: 50000225
.50 Hours
Material List
Item Index
Ember Part Number
Description/Material Type
Quantity
1
95000941
Bracket 1 X 14.5 7G Steel black PC
2
2
95000042
10 x 1 Pan Quad T-3 Self Drilling Screw
4
3
95000064
8 x 1-3/4 Round Washer Quad 2/3 Deep
Thread Type 17 Screw
4
1) Purpose
The purpose of this document is to provide detailed instructions for adding metal
brackets to fully secure the slide-out overhead cabinet that has separated from the
roof.
2) Safety Terms
REV: 12.15.2023
Page 1
OVERHEAD CABINET BRACKET INSTALL
Document # TD-23-06
3) Procedure
Note: Position brackets behind vertical styles; recommended locations are identified
by A & B in Figure A.

You may also place a bracket behind a vertical style where the cabinet
separates most from the roof.
Figure A
1. Secure the top of the bracket (Item# 95000941) with (2) 1” screws (Item#
95000042) into the aluminum tube along the slide-out back wall; alternating
tightening screws until secured.
Figure B
REV: 12.15.2023
Figure C
Page 2
OVERHEAD CABINET BRACKET INSTALL
Document # TD-23-06
2. Secure the bottom of the bracket with (2) 1-3/4” screws (Item# 95000064) into
cabinet base; alternating tightening screws until secured.
Figure D
Figure E
3. Repeat steps 1 and 2 for the second bracket.
Safety, education, and customer satisfaction are our primary concerns. Should you
have any questions, please contact us at 844-732-4204 or by email at
[email protected].
REV: 12.15.2023
Page 3
OVERHEAD CABINET BRACKET INSTALL