LI00.20-P-077615

Vehicle handover cannot be performed
Topic number
LI00.20-P-077615
Version
1
Function group
00.20 - Maintenance, service system (FSS, ASSYST)
Date
3/15/24
Validity
Model series 167, 192, 206, 214, 223, 232, 236, 254,
290, 294, 295, 296, 297 and 465
Reason for change
Validities added.
Complaint
The following symptoms may be present in the instrument cluster:
1.
2.
"Perform vehicle handover" in the workshop menu to start the maintenance computer for service A/B cannot be
carried out.
Service confirmation is not possible because "Perform vehicle handover" is displayed. This cannot be carried
out.
Cause
Routine change in software in instrument cluster N133/1. Vehicle handover has not taken place.
Remedy
First manually commission the already installed instrument cluster control unit N133/1 and then perform the special
procedure to re-initialize ASSYST data in powertrain control unit N127.
NOTE: The information contained in this document is intended for use by trained, professional technicians with the
knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz
approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and
provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect
is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a
symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes
resulting in the same or similar symptoms or conditions described in this document, and trained professional service
technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained
in this document does not guarantee warranty coverage nor does it extend the vehicle’s warranty in any way.
Symptoms
Overall vehicle > Maintenance > Active Service System ASSYST > Cannot be programmed
Overall vehicle > Maintenance > Active Service System Plus ASSYST PLUS > Implausible
Operation numbers/damage codes
NaN.NaN.NaN NaN:NaN:NaN
© Copyright Mercedes-Benz AG
IKURTIS
Page 1 / 2
Op. no.
Operation text
NaN.NaN.NaN NaN:NaN:NaN
© Copyright Mercedes-Benz AG
Time
IKURTIS
Damage
code
Note
540R3F1
Please use this damage code when
invoicing
Page 2 / 2