B2A00
B2A00
DTC B2A00, sometimes indicated as B2A0000 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle body.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 17-NA-129 - ELECTRICAL SYSTEM:SOFTWARE
CHEVROLET: This technical bulletin provides a procedure to reprogram the drive motor power inverter module software to the latest calibrations to correct a condition of propulsion power reduced message displayed and/or dtc B2A00 set due to a calibrati
2009 CHEVROLET TRAVERSE with 38566.0 miles
As i was driving going approximately 55 mph the park assist message appeared on the dashboard and then the car suddenly lost power. The gauges went to 0 and the radio and air conditioning went off. It then suddenly popped back on and 4 different warning lights came on the dash (check engine, tire pressure, a decal with a lock and the passenger air bag light) and then off again. I pulled over and turned the engine off. When i attempted to start the car again it would not turn over. I attempted 2 times and on the 3rd time the engine turned over and the warning lights were off. The following codes came up when a computer diagnostic tool was plugged in approximately 30 minutes after the issue occurred. B2aaa, B2A00, P0008, po202 and U25E5.
ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM