C1043
C1043
DTC C1043, sometimes indicated as C104300 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle chassis.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- A4320412059843_1 - ELECTRICAL SYSTEM:SOFTWARE
AUDI: This bulletin contains a software update for an adaptive suspension warning with dtcs C104011, C104111, C104211, and C104311.
2016 JEEP WRANGLER with 35800.0 miles
9/27/2019. 4:30pm. Accelerated normally on city street from stop light and made left turn. As i turned, engine choked and stumbled and vehicle had reduced power, slowing vehicle. Traction control dash light came on. Car behind almost hit me. After about 10 seconds, engine returned to normal and vehicle picked up speed. 10-15 seconds later same thing happened again with traction control and anti lock brake dash lights coming on. Engine reduced power and vehicle slowed again in traffic. After 10 seconds, engine returned to normal, dash lights went off. Vehicle has been normal since then. Weather at the time: sunny, 85 degrees, daylight. Roads completely dry. Vehicle did not drive thru water, etc. Had been driving on city streets 25-40 mph for 20 minutes. Called dealer. No help on phone. Took vehicle to Jeep dealer on nov 6, 2019 and they found code "C1043 performance" but said nothing more. Tech write up says "left rear tone wheel performance code has gone stored. No cause present. Reset code". About 35,800 miles on vehicle. Vehicle has never been off road or modified in any way. Stock Wrangler 4 door sport.
ELECTRONIC STABILITY CONTROL, ENGINE ELECTRONIC STABILITY CONTROL ENGINE