C1044

Multiple issues with this vehicle. The latest one is the most serious. A faulty abs sensor cause the brakes to operate abnormally. The abs light may come on then go off and (periodically goes on and off). Regardless of the light status, the abs system randomly engages and does not allow the vehicle to stop in a safe manner. The abs when engaged resists the driver from apply pressure to the brake pedal. The result is the car not stopping. Luckily i was going slow and there was no one around other wise there would have been an accident. The abs light came on, resisted my braking force then went off and allow the brakes to engage as anticipated. The roads were normal, dry and free of debris/ loose fill. This happened twice over two days. On the second day i parked the car and let it sit until it's service date. The service department diagnosed a faulty sensor with code C1044. They said it was due to rust. First this is a 2007 car, second if rust on a sensor is going to inhibit normal braking then the part is defective and or the design is defective. I was lucky some one else is not going to be. Abs is designed to pump the brakes under certain conditions. I'm sure normal driving at 25 mph on a dry normal surface isn't one of them. Even if the abs fails the operator should still be able to stop the car by applying manual force to the brake petal. This failure does not allow effective use of the brakes! Second issue is the lights (both interior and exterior dimming) with audible surges in the climate control blower. The dealer says this is due to my remote starter even though this issue has been occurring well before the remote starter was involved. Third issue is the rear window repeatedly coming out of track there were other issues with the brakes rotors warping and brake light coming on, gas cap light coming on, tire sensors
UNKNOWN OR OTHER, SERVICE BRAKES, HYDRAULIC ELECTRICAL SYSTEM