C1441
Steering Phase A Circuit Signal Is Not Sensed
DTC C1441, sometimes indicated as C144100 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle chassis.
- C1441: Steering Phase A Circuit Signal Is Not Sensed
See Also: Related Error Codes
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- T-TT-0491-18 - BRAKES (PWS)
TOYOTA: Tt: brake warning light illuminated ? Dtc C1441. - T-SB-0010-15 - SERVICE BRAKES, HYDRAULIC
TOYOTA: Tsb: some 2015 model year camry vehicles equipped with the 2ar-fe engine may exhibit an intermittent service brake warning light "on" condition and stored diagnostic trouble code (dtc) C1441. Customers may also notice the light will illumin - T-SB-0010-15 - BACK OVER PREVENTION
TOYOTA: Tsb: some 2015 model year camry vehicles equipped with the 2ar-fe engine may exhibit an intermittent service brake warning light ?On? Condition and stored diagnostic trouble code (dtc) C1441. Customers may also notice the light will illumin - T-SB-0010-15 - SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT
TOYOTA: Toyota 2015 camry : information regarding brake warning light illuminated or dtc C1441 equipped with the 2ar-fe engine may experience warning light at startup of vehicle. *lj
2016 TOYOTA CAMRY with 4331.0 miles
6/6/17, 7pm, on starting car; in mall parking lot, both the brake and power steering alert warning lights/msgs turned on and stayed on. Turned engine off/on several times; alerts still on. Checked brake fluid level and verified parking brake disengaged. Drove home, and garaged car. Started/stopped engine many times, till late at night, but alerts stayed lit. I flipped through all the alert messages, which showed 2 alerts, 1)brake alert and 2)power steering alert. Both alerts were present next morning. Per owner booklet, dealer wanted car towed in. Prepared for front wheel tow, by driving from garage to street by turning car to face street and driving back to driveway. After parking car, both the alert lights turned off. Mentioned this to dealer. Asked if i still wanted to bring car in, i said yes, i wanted it investigated. 6/8/17 dealer ran the diagnostic scan and found history code C1441. Reported as "abs performance decline and brake function". This can be caused by "brake pedal being pushed while move with engine off, or pushing brake pedal and gas pedals, concurrently'. I know neither of these two happened. Dealer road tested car, found no recurrences of the problem and returned car. Back home, found that the 2015 Camry ,with code C1441, had a recall of the brake vacuum booster assembly (tsb-0010-15). Since the 2016 Camry is essentially the same car as the 2015 Camry, i thought it might apply to the 2016 model. Abs malfunction, with code C1441 is still being triggered, on the 2016 Camry, with the 2ar... Engine. For the 2016 Camry, found brake related problems still being reported, some with severe accidents, possibly related to the abs or computer . See nhtsa id 10991889, 10966112, 10934015, 10915061, 10903212, 10883921, and 10873023 as examples. Hope Toyota gets a chance to look into this safety defect, before a more serious accident.
SERVICE BRAKES, STEERING
2014 TOYOTA SIENNA with 24500.0 miles
My vehicle 's very hard brake with dtc C1441 , odometer only 25.036 mileage i need a long distance to stop the car
SERVICE BRAKES,
2013 TOYOTA VENZA with 59460.0 miles
On hwy vehicle wouldn't stop or steer, lost all power and control. Came to stop in the median, had to have towed, cause is listed as :173600410, C1201, C1241, C1441 Toyota of irving called to inform me that they were not able to recreate the problem and that the vehicle is operating as designed by the manufacturer.
VEHICLE SPEED CONTROL, STEERING SERVICE BRAKES