C2205

---

2008 CHRYSLER TOWN AND COUNTRY with 109000. miles

All four brake system lights are lite up. Steering has become loose and steering wheel wobbles. I have changed the pads on brakes 4 times in a year and my rotors are still very grooved. Dust is sucking up into the cab of the vehicle for no reason. There is a knocking coming from the engine that sometimes is there but most of the time its present was told by the dealer i bought from that was normal in these vans. Has a hard time coming to a stop now. I can not believe this has not been recalled codes on machine that are indicated are C2200 and C2205 which are ridiculous to buy and from what i have read everyone is having problems with them
STEERING, SERVICE BRAKES ELECTRONIC STABILITY CONTROL

---

2007 JEEP GRAND CHEROKEE with 11800.0 miles

The vehicle has a safety issued at this point it is unsafe to drive. The clockspring is bad due to manufacturers errors. When the vehicle is driven, the vehicle is losing power due to engine mechanical problems. The clockspring has a code stated as C2205 on the computer module. The steering wheel shakes going over 60mph at this point i do not know why.
ENGINE, STEERING AIR BAGS

---

2007 JEEP WRANGLER 4-DR 4X4 with 10400.0 miles

Backing out of parking spaces and turning a corner at very low speeds, caused the esp and bas dash lights to come on and stay on. All the dash lights have come on at speeds of 5 mph while driving in a parking lot, vehicle acted like it was going to stall, but did not turn off. Took the Jeep in for service, dtc's were scanned dtc stored codes were found, C2205 steering angle sensor internal, C121A, steering angle sensor not initialized. All stored dtc codes were cleared and all modules were checked and new software, abs52059883ae was installed. Automatic transmission vibrates between 35-40 mph, dealer could not recreate vibration or find cause.
POWER TRAIN:AUTOMATIC TRANSMISSION, ENGINE AND ENGINE COOLING