C249F
C249F
DTC C249F, sometimes indicated as C249F00 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle chassis.
2006 MERCEDES BENZ CLS55 with 35924.0 miles
The vehicle was sended to inspection due to a "brake warning" started showing at the gauges control panel. Mercedes benz dealer service manager indicates that they not have a correct tool to recode to actualize the brake system and /or fix the problem at that time. Three visits and several phone calls been made to the dealer. The service advisor is always with other customer. I'm stop to drive my vehicle, because i never knew how deep is the problem. Doing a visual inspection i observed that the rear brake pads are not applying good enough, the surfaces of the rotors are different. The Mercedes Benz dealer representative still not notify me. This is a safety issue. This vehicle is not making any noise or have any vibration during braking. But i notice that is braking more at front than the rear. *brake fluid is been changed by the dealer. Service advisor stated that this car have an "extended recall" for brake mal-function/on different areas, but nothing is been done to fix the codes: hydraulic faults/C25D0/C2514/C249F/C22B5 & C223C. This may be the abs control box fault. After been waiting from 07:30 - 13:00 (5.5 hrs) on my last visit. I received my car back just with few words front the advisor; " we need to order a part to re-coded your system, we contact you later (21 aug 2015). Note: recall # 05v133000 did you can assist me with this problem/ situation? Thanks in advance. V/ respectfully, mr. W.Ortiz
SERVICE BRAKES, FUEL/PROPULSION SYSTEM
2005 MERCEDES BENZ E320 with 99200.0 miles
I was slowing down to exit the highway and when i stepped on the brakes, i felt no pressure on the pedal brakes. I pressed harder on the brakes and still the car didn't slow until i got to a slight incline at the end of the ramp. Then a red warning light on the dashboard appeared reading "reduced brake power". I turned off the engine and waited a couple of minutes. I managed to get home safely. I called a certified mechanic and he told me to call the Mercedes Benz dealer because of a possible recall. As per the mechanic, this are the faulting codes: C2131 - pressure reservoir faulty C249F - operating time of component a7/3 (sbc left hydraulic unit) is exceeded C25D5 - hydraulic fault malfunction in pressure supply as of this writing, my brakes have not been repaired.
SERVICE BRAKES,