C25D5
C25D5
DTC C25D5, sometimes indicated as C25D500 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle chassis.
2005 MERCEDES BENZ E320 with 89000.0 miles
I was stopped at a light (luckily) and my car started rolling forward. I pressed the brakes harder and they went to the floor and the car continued rolling forward. I threw the car into park and turned on my hazards. The police showed up. He tried putting the car in drive to get it off the road but it wouldn't go into gear. My husband showed up, turned the car off and then on and the car was able to be moved to a close parking lot. When we brought it to a mercedes dealership, they found codes (C233D, C22BC, C23BD, C223C, C26DE, C25D5) for pressure system failure and pressure failure to all four tires at the same time. We were told that the brakes needed to be flushed before any sensotronic warranty work would be reimbursed. So we paid $465.99 to have them flushed and were told that the system was retested and no problems were found. I was given instructions by the technician that when this happens again, brake early and press the brakes really hard. If we get a different code next time, they will be covered under the warranty. We have been in contact with mercedes and they have referred us back to the expertise of the dealership.
SERVICE BRAKES,
2005 MERCEDES BENZ E320 with 99200.0 miles
I was slowing down to exit the highway and when i stepped on the brakes, i felt no pressure on the pedal brakes. I pressed harder on the brakes and still the car didn't slow until i got to a slight incline at the end of the ramp. Then a red warning light on the dashboard appeared reading "reduced brake power". I turned off the engine and waited a couple of minutes. I managed to get home safely. I called a certified mechanic and he told me to call the Mercedes Benz dealer because of a possible recall. As per the mechanic, this are the faulting codes: C2131 - pressure reservoir faulty C249F - operating time of component a7/3 (sbc left hydraulic unit) is exceeded C25D5 - hydraulic fault malfunction in pressure supply as of this writing, my brakes have not been repaired.
SERVICE BRAKES, SERVICE BRAKES