P0581
Cruise Control Multi-Function Input "A" Circuit High
DTC P0581, sometimes indicated as P058100 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the engine idling stability causing cruise control multi-function input "a" circuit high.
The Cruise Control Multi-Function Input "A" Circuit High is caused when the input voltage on connector "A" is higher than expected. This could be caused by a short circuit, a bad connection, or a high resistance in the circuit.
The first step in fixing this code is to check connector "A" for a good connection. If the connection is good, then you will need to check for a short circuit or a high resistance in the circuit.
- P0581: Cruise Control Multi-Function Input A Circuit High
- P0581: Cruise Control Multi-Function Input "A" Circuit High
- P0581: Cruise Control Multi-Function Input "A" Circuit High 2
- P0581: Cruise control system, multi-function switch input A – circuit high
- P0581 00: Cruise control system, multi-function switch input A - circuit high
2003 CHRYSLER 300M with 38000.0 miles
Our 2003 Chrysler 300m airbag light and dtc code p 0581 both went on approximately 3 months ago. P0581 indicates cruise control multi-function input a circuit high. The car has 38,000 miles. I spoke with a Chrysler dealer and was told the two occurrences indicated a bad 'airbag clock spring coil'. In my research i found there was a recall on Chrysler llc minivans for the same problem, also that there are many instances of this occurring in other Chrysler models. Because this seems a consistent problem with Chrysler llc vehicles, is there any investigation in progress? Also, the dtc code P0420 indicating 1/1 catalytic converter is not functioning properly. Chrysler llc seems to have problems with safety and emissions.
VEHICLE SPEED CONTROL, AIR BAGS:FRONTAL ENGINE AND ENGINE COOLING