P0613
TCM Processor
DTC P0613, sometimes indicated as P061300 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing tcm processor.
This code is set when the TCM (transmission control module) processor has failed. There are several possible causes for this code, including a failed TCM, a failed powertrain control module (PCM), or a failed circuit.
There are several things that can be done to try to fix this code, including replacing the TCM, replacing the PCM, and checking the wiring and connectors. If the code persists after performing these repairs, it may be necessary to replace the entire powertrain control module.
- P0613: TCM Processor
- P0613: TCM Processor Fault
- P0613: Transmission control module (TCM) – processor error
- P0613 00: Transmission control module (TCM) - processor error
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 16-138-22 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM)
SUBARU: This bulletin announces the availability of transmission control module (tcm) reprogramming files to address dtc P0613. - 3626 - ENGINE AND ENGINE COOLING
CHEVROLET: Ses light with P0613 or P0614 on tech 2 - dtcs not in si. *tt
2006 JEEP WRANGLER with 125000. miles
The vehicle while operating under normal driving conditions had a check engine light appear. A certified mechanic found the tcm was faulty. Findings: P0218 high temp operation activated. P0714 transmission temp sensor intermittent. P0613 internal tcm problem. Instrument cluster: 1 tcm/single board engine control message not received data list for tcm is reading 1023 degrees fahrenheit or 1.10 volts having code P0613 tcm is faulty.
ELECTRICAL SYSTEM, POWER TRAIN ELECTRICAL SYSTEM POWER TRAIN