P0714
Transmission Fluid Temperature Sensor A Circuit Intermittent
DTC P0714, sometimes indicated as P071400 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing transmission fluid temperature sensor a circuit intermittent.
The most common cause of this code is a bad transmission fluid temperature sensor. If the sensor is bad, it will cause the code to set and the check engine light to come on. The sensor can be tested to see if it is bad. If it is bad, it will need to be replaced.
- P0714: Transmission Fluid Temperature Sensor A Circuit Intermittent
- P0714: Transmission Fluid Temperature Sensor "A" Circuit Intermittent
- P0714: Trans Fluid Temp Sensor A CKT Intermittent
- P0714: Transmission fluid temperature (TFT) sensor – circuit intermittent
- P0714 00: Transmission fluid temperature (TFT) sensor - circuit intermittent
- P0714 00: Transmission oil temperature sensor - intermittent failure
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- B15-041 - 8-21-1 - ELECTRICAL SYSTEM:SOFTWARE
ACURA: "service bulletin - multiple indicators come on and transmission is stuck in 4th gear, and temporary dtc P0714 is stored (atf temperature sensor (intermittent failure)). Sensitivity in the software for the atf temperature sensor circuit." - SB15-041 - POWER TRAIN:AUTOMATIC TRANSMISSION
ACURA: 2015 acura tlx transmission is stuck in 4th gear with multiple indicator present. Temporary dtc P0714 is stored. *cn
2006 JEEP WRANGLER with 125000. miles
The vehicle while operating under normal driving conditions had a check engine light appear. A certified mechanic found the tcm was faulty. Findings: P0218 high temp operation activated. P0714 transmission temp sensor intermittent. P0613 internal tcm problem. Instrument cluster: 1 tcm/single board engine control message not received data list for tcm is reading 1023 degrees fahrenheit or 1.10 volts having code P0613 tcm is faulty.
ELECTRICAL SYSTEM, POWER TRAIN ELECTRICAL SYSTEM POWER TRAIN