P2709

DTC P2709, sometimes indicated as P270900 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing shift solenoid f electrical.

The P2709 code is set when the PCM detects a problem with the shift solenoid F electrical circuit. This code is most commonly caused by a defective shift solenoid F, a wiring problem, or a problem with the PCM.
The shift solenoid F is responsible for controlling the hydraulic pressure that is used to shift the gears in the transmission. When this code is set, the transmission will not shift properly.
The first step in troubleshooting this code is to check the shift solenoid F for proper operation. If it is not functioning properly, replace it.
If the shift solenoid F is functioning properly, check the wiring for any damage or shorts. Repair any wiring problems as necessary.
If the PCM is defective, replace it.

• P2709: Solenoid F Electrical
• P2709: Shift Solenoid F Electrical
• P2709: Shift Solenoid "F" Electrical
• P2709: Shift solenoid (SS) F – electrical
• P2709 00: Shift solenoid (SS) F - electrical

These codes are commonly diagnosed with error code P2709.

• P0753 [3] Shift Solenoid A Electrical
• P0758 [3] Shift Solenoid B Electrical
• P0748 [2] Pressure Control Solenoid A Electrical
• P0763 [2] Shift Solenoid C Electrical
• P0768 [2] Shift Solenoid D Electrical
• P0773 [2] Shift Solenoid E Electrical
• P0743 [2] Torque Converter Clutch Circuit Electrical
• P0741 [2] Torque Converter Clutch Circuit Performance or Stuck Off
• P075A [1] Shift Solenoid G Malfunction
• P0841 [1] Transmission Fluid Pressure Sensor/Switch "A" Circuit Range/Performance