P2718
Pressure Control Solenoid "D" Control Circuit/Open
DTC P2718, sometimes indicated as P271800 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing pressure control solenoid "d" control circuit/open.
The code P2718 is set when the PCM detects an open or shorted condition in the pressure control solenoid D control circuit.
Possible causes of this code include a defective pressure control solenoid, a wiring fault, or a failed PCM.
If you have access to a scan tool, you can check for a voltage drop or an open circuit in the pressure control solenoid D circuit. If there is a problem, you may need to replace the pressure control solenoid or the PCM.
If you do not have access to a scan tool, you can check for voltage at the pressure control solenoid D connector. If there is no voltage, check for a wiring fault. If there is voltage, the pressure control solenoid is likely defective.
- P2718: Control Solenoid D Control Circuit/Open
- P2718: Pressure Control Solenoid "D" Control Circuit/Open
- P2718: Transmission fluid pressure (TFP) solenoid D – open circuit
- P2718 00: Transmission fluid pressure (TFP) solenoid D - open circuit
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- N182193520 - POWER TRAIN
CHEVROLET: Service update. On a small number of the vehicles identified above, the electrical connector to the transmission valve body solenoids may not be fully seated. Dtc P2718 or P2720 may set resulting in the check engine indicator illuminating, - N182193520 - POWER TRAIN
CHEVROLET: Service update. On a small number of the vehicles identified above, the electrical connector to the transmission valve body solenoids may not be fully seated. Dtc P2718 or P2720 may set resulting in the check engine indicator illuminating,