P2720
Pressure Control Solenoid "D" Control Circuit Low
DTC P2720, sometimes indicated as P272000 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing pressure control solenoid "d" control circuit low.
The DTC P2720 code means that the powertrain control module (PCM) has detected a low voltage condition in the pressure control solenoid "D" circuit.
Possible causes of this code include a defective pressure control solenoid, a wiring issue, or a problem with the PCM.
If this code is stored, the best course of action is to have a qualified technician inspect the vehicle and determine the cause.
- P2720: Control Solenoid D Control Circuit Low
- P2720: Pressure Control Solenoid "D" Control Circuit Low
- P2720: Transmission fluid pressure (TFP) solenoid D – circuit low
- P2720 00: Transmission fluid pressure (TFP) solenoid D - circuit low
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- N182193520 - POWER TRAIN
CHEVROLET: Service update. On a small number of the vehicles identified above, the electrical connector to the transmission valve body solenoids may not be fully seated. Dtc P2718 or P2720 may set resulting in the check engine indicator illuminating, - N182193520 - POWER TRAIN
CHEVROLET: Service update. On a small number of the vehicles identified above, the electrical connector to the transmission valve body solenoids may not be fully seated. Dtc P2718 or P2720 may set resulting in the check engine indicator illuminating,