U1504

U1504

DTC U1504, sometimes indicated as U150400 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle user network.


    See Also: Related Error Codes
    DTC Trouble Code Search
    Consumer Complaints for this DTC



    2016 CHRYSLER 200

    The seat belt indicator stays on. Code U0001 only occurred at in & out inspections. Code U1504 steering angle sensor 3/2020.
    AIR BAGS, STEERING ELECTRONIC STABILITY CONTROL AIR BAGS ELECTRONIC STABILITY CONTROL STEERING



    2015 JEEP CHEROKEE with 1099.0 miles

    10nov14 returned the car to the dealer for p56 recall.24nov14 mil turned on while driving w/ 1099 miles. Returned car to a dealer in thousand oaks.Tech resets mil & erased codes. 4mar15 mil turned-on again w/ 4375 miles on the car. I was driving it on the freeway then it starts to lunge & skip gear, depressed the acceleration pedal & wouldnt accelerate & was blessed i didnt get into an accident & made it home safe.Trans temp reached over 258 deg, doesnt accelerate properly & lunges all the time.Everytime the gear is shifted it takes 5 sec to engage & lunges again w/ very loud knocking sound after it engages.Error codes showed up on the reader: U1504 intake control module mal, P061B internal control module calculation performnce, U0140 lost comm w/ body cntrl module, P07D9, P10A1 abnormal oil pump volt/ovrheat, & P1DAF.I didnt drive the car after that & called up nearest dealer in ventura ca.Advisor scheduled an appointment after telling them what happened.16mar15, brought the car to the dealer in ventura to have it inspected w/ the problems that i have provided & left the car w/ 4375 miles.17mar15 advisor informed me that tranny needs to be replace.25mar15 i contacted Jeep chat online & was assigned a case number.1apr15, received the car back w/ a new tranny installed.4apr15 the car started to lunge again slowing down & tries to accelerate by itself.Shifting of gear takes 3 sec to engage, lunges & a very loud knocking sound will also be heard again.Airbag light came on & error code U0140 showed up again.Car was unusable again & wasnt safe to drive.Scheduled an appointment again w/ the dealer.6apr15, returned the car to dealer to be inspected w/ problems that i have mentioned w/ 4808 miles.As of today 20apr15, car still in the state of unusable condition & unsafe to be driven.I havent got it back from the dealership repairs.No resolutions have been made yet by chrysler co.
    POWER TRAIN,



    2015 JEEP CHEROKEE with 148000. miles

    Check engine light comes on, codes are U1504, U1412, U0001, U1110, U1120, will not shift, 4wd temporary unavailable message comes on , stability traction light comes on, all shifter gear lights are on, this had happened 7 times since i purchased this Jeep, engine has cut a couple of times during all of these issues!
    ENGINE, ELECTRICAL SYSTEM POWER TRAIN



    2015 CHRYSLER 200 with 100000. miles

    The vehicle was diagnosed by 2 different repair shops with the follow codes: U1504, P0610, P1500, U0420, C0051, C212A, U0402, C1246. Ultimately, the pdc (power distribution center) is not working. There have already been several recalls on this issue with this vehicle and the recall dates do not reach our vehicles manufactured date by a month. The dealership is refusing to cooperate and help with notifying you of this issue that is affecting more consumers than you are under the impression. Please respond to this in a timely manor. My husbands vehicle will not be usable until this is settled.
    ELECTRONIC STABILITY CONTROL,



    2015 CHRYSLER 200 with 82201.0 miles

    Check engine light came on. Had vehicle check and got a code. U1504 implausible message data length received from steering angle sensor. Airbag clockspring needs to be replace because airbad may not doploy during an accident. Was told to contact the dealership to see if there was a recall. There is not at this time. This is a defective part of the saftey system on the car and they do not want to cover it.
    AIR BAGS, ELECTRICAL SYSTEM



    2015 CHRYSLER 200 with 79000.0 miles

    After reaching 75,000 miles, my car started to stall and turn off by itself while driving. I performed an oil change, made sure all the maintenance was up to date, etc. It has a new battery less than a year old, new tires, etc. Eventually it stalled and shut off on its own while stopped and would not turn back on. Every time i try to turn it back on, it stalls and shuts off but the shifter lights blink repeatedly. I have a code that appeared on a mechanic's code reader which was U1504. He could not diagnose it. Chrysler would not look at it and wanted $125 just to do diagnostics. I just wanted to know if this was one of the recalled issues as i know they have been having engine and transmission issues.
    ENGINE, ELECTRICAL SYSTEM UNKNOWN OR OTHER AIR BAGS

    Previous Code: U1503 | Next Code: U1505