Recalls

Recall 151267

  • USA Recall: The change in boom speed can result in unintended positioning of the boom, increasing the risk of injury.
    Altec industries inc. is recalling certain 2015-2018 lr7, alb, ac18, ac23, and ac38 vehicles built on an international n9/n10 chassis. during an hc desorb cycle, the vehicle's idle will rapidly rise causing an increase in pump flow. the increased pump flow can result in the moving speed of the boom changing.

    Corrective Action:
    Altec will notify owners, and dealers install an update that will reprogram the low idle preset to 850 rpm, free of charge. the recall began october 16, 2020. owners may contact altec customer service at 1-877-462-5832. altec's number for this recall is csn 774.

    Additional Notes:
    Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.