Recalls

Recall 1998007

  • CA Recall: Suspension
    The steer axle wheel bearing jam nut lock washer may not have been bent over the jam nut after the wheel bearings were adjusted. if this condition exists, the jam nut and the wheel bearing adjusting nut may back off the spindle, allowing the wheel and brake drum assembly to separate from the vehicle. correction: vehicles will be inspected and if required, the steer axle wheel bearing will be adjusted and then the jam nut lock washer will be bent over the jam nut.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.