Recalls

Recall 2005183

  • CA Recall: Fuel supply
    On certain vehicles equipped with a 6.0l diesel engine, the fuel injection control module (ficm) wire harness may chafe against an engine bolt. also, the injection control pressure (icp) sensor connector terminals may have an improper crimp height that may result in intermittent or permanent loss of the icp sensor signal. ficm wire harness chafes or improper icp sensor connector crimps may cause the vehicle to stall without warning while driving. if the vehicle stalls, it may or may not restart. correction: for all f-superduty and excursion vehicles, dealers will inspect the ficm wire harness for chafing. if bare wires have not been exposed, dealers will install a wire protection kit. if bare wires have been exposed, dealers will install a new wire harness. for all e-series and, depending on build date, some f-superduty and excursion vehicles, dealers will install a new icp sensor connector with certified crimps.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.