Recalls

Recall 2007008

  • CA Recall: Wheels
    On certain motorcycles equipped with cross-spoke wheels and the optional tire-pressure monitoring system (tpm), the hole though which the tire inflation valve (and in this case, the integral tpm sensor) is inserted was not manufactured according to specifications. because of this, the valve may not seat properly in the hole, and a leak may develop. in some cases, it is possible that sudden deflation of the tire could occur. if this happened, motorcycle handling and control would be compromised, increasing the risk of a crash. correction: dealers will temporarily deactivate the tpm system, remove the corresponding valves and integral tpm sensors, and then replace them with standard valves. when a permanent repair is available, owners will be notified to bring their vehicle in for reactivation of the tpm system and replacement of the integral tpm sensors and valves.

  • © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.