Recalls

Recall 2009140

  • CA Recall: Electrical
    On certain vehicles, the stop lamp switch may have been incorrectly installed during vehicle assembly. this could prevent proper brake lamp operation. failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing injury or death. a malfunction of the switch may also cause the brake lamps to remain illuminated when the brake pedal is released. additionally, a faulty switch may affect the operation of the brake-transmission shift interlock on automatic transmission-equipped vehicles so that the transmission shifter would not be able to be shifted out of park position. it may also cause the electronic stability control (esc) light to illuminate, and it may not deactivate the cruise control when the brake pedal is depressed. correction: dealers will replace the stop lamp switch assembly.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.